Canon printer MAXIFY MB2120 User Manual
Have a look at the manual Canon printer MAXIFY MB2120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SettingReceiveModeSet the receiving operation (receiving mode). For details on how to set the receive mode: Setting Receive Mode You can select the appropriate mode. For details on the selectable receive mode: About Receive Mode For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode Note
You can specify the number of times the external device rings when incoming. SettingDRPDRingPattern(USandCanadaonly) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your printer will automatically monitor the ring pattern, and will automatically receive the fax if the ring pattern is a fax call. To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by your telephone company. Note
9.Press Back button. The Receivemodesettings screen is displayed.10. Press OK button. The Functionlist screen is displayed. 905
SettingSenderInformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number. About Sender Information Setting Date and Time Setting Daylight Saving Time (Summer Time) Registering User Information AboutSenderInformation If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax. A. Date and time of transmission B. Unit fax/telephone number C. Unit name D. The registered recipient's name is printed when sending faxes. E. Page number Note
SettingDateandTime This section describes the procedure to set the date and time.1. Make sure that printer is turned on. 2. Select Setup on HOME screen. Using the Operation Panel 3. Select Devicesettings , and then press OK button. 4. Select Deviceusersettings , and then press OK button. 5. Select Date/timesetting , and then press OK button. 6. Set date and time. Use the button to move the cursor under the desired position, and then use the button to enter the date and time. Enter the date and time in 24-hour format. Enter only the last two digits of the year. 7. Press OK button. 8. Press HOME button to return to HOME screen. SettingDaylightSavingTime(SummerTime) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year. You can set your printer to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends. 907
8. Set date and time when summer time ends. 1. Set date when summer time ends. Use the button to change the setting item, use the button to change the setting, and then use the OK button to confirm the selection. 2. Set time (in 24-hour format) when summer time ends. Use the button to move the cursor under the desired position, use the button to enter the time, and then press the OK button. Precede single digits with a zero. 9. Press HOME button to return to HOME screen. RegisteringUserInformation This section describes the procedure to register the user information. 909