Canon printer MAXIFY MB2120 User Manual
Have a look at the manual Canon printer MAXIFY MB2120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5. Close document feeder cover and turn on printer. When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the printer, or if the document jam error continues after removing the document, contact your nearest Canon service center to request a repair. Note
OtherCasesCheck the following: Check1 Is anything blocking paper output slot? Check2 Is rear cover attached properly? Check3 Is paper curled? Correct curl before loading paper. 1192
1200Cause Front cover is open. WhattoDo Close the front cover and wait for a while. Do not close it while you are replacing an ink tank. 1194
1309Cause Paper size that is not compatible with automatic duplex printing is specified. WhattoDo The sizes of media suitable for auto duplex printing are A4 and Letter. Press the printer's Stop button to cancel printing. Then change the print settings and retry printing. 1195
1310Cause Size of paper may not be compatible with automatic duplex printing. WhattoDo The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure paper of the correct size is loaded. Press the OK button to eject the paper and restart printing from the front of the next piece of paper. The reverse side of the ejected sheet is not printed. 1196
1319Cause Size of paper is not compatible with automatic duplex printing. WhattoDo The sizes of media suitable for auto duplex printing are A4 and Letter.Press the printer's Stop button to cancel printing. Then change the print settings and retry printing. 1197
1575Cause Ink cannot be correctly detected. WhattoDo If an ink tank becomes empty, replace it. An ink tank cannot be replaced until it becomes empty. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition. 1198
1600Cause Ink may have run out. WhattoDo Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the machine's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition. Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. Important
1660Cause An ink tank is not installed. WhattoDo Install the ink tank. 1200