Canon Pixma Mp530 User Guide

							
Chapter 10 159Appendix
*1 For updated compatibility, visit our website.*2 Operation can only be guaranteed on a computer with built-in USB or USB 2.0 Hi-Speed port 
and pre-installed Windows XP, 2000, Me or 98.
*3 Including compatible processors.*4 ScanSoft OmniPage SE (OCR software) does not support Windows 98 first edition.
z CD-ROM drive
z Display : SVGA 65,000 colors
USB Mac OS X v.10.4 PowerPC G3/
G4/G5 256 MB 500 MB
Mac OS X v.10.2.8 - v.10.3 PowerPC G3/ G4/G5 128 MB 500 MB
Additional System Requirements for On-screen Manuals
z
Browser: Windows HTML Help Viewer
* Microsoft Internet Explorer® 5.0 or later must be 
installed.
The On-screen Manual may not be displayed 
properly depending on your operating system or 
Internet Explorer version. We recommend that you 
keep your system up to date with Windows Update.z Browser: Help Viewer
* The On-screen Manual may not be displayed 
properly depending on your operating system. We 
recommend that you keep your system up to date.
Minimum System Requirements*1
 
						

							
160Chapter 10Appendix
Users in the U.S.A. 
Pre-Installation Requirements for MP530
A. Location
Supply a suitable table, cabinet, or desk for t he machine. See the Appendix for the machine’s 
specific dimensions and weight.
B. Order Information 1. Only a single telephone line (t ouch-tone or rotary) should be used.
2. Order an RJ11-C modular wall jack (USOC c ode), which should be installed by the telephone 
company. If the RJ11-C modular wall jack is not  present, telephone/fax operation is not possible.
3. Order a normal business line from your te lephone company’s business representative. The 
line should be a regular voice gr ade line or the equivalent one. Use one line per machine. 
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Di al) line if you communicate overseas
C. Power Requirements This machine should be connected to a standard 120 volt AC, two-prong grounded outlet only. 
Do not connect this machine to an outlet or pow er line shared with other appliances that cause 
“electrical noise.” Air conditioners , electric typewriters, copiers, and machines of this sort 
generate electrical noise which often interfer es with communications equipment and the sending 
or receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the  FCC rules and the requirements adopted by the ACTA. 
On the rear panel of this equipment is a label  that contains, among other information, a product 
identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the 
telephone company.
The REN is used to determine the number of dev ices that may be connected to a telephone line. 
Excessive RENs on a telephone line may result in t he devices not ringing in response to an incoming 
call. In most but not all areas, the sum of RENs s hould not exceed five (5.0). To be certain of the 
number of devices that may be connected to a line,  as determined by the total RENs, contact the 
local telephone company. The REN for this product is pa rt of the product identifier that has the format 
US:AAAEQ##TXXXX. The digits represented by ## are  the REN without a decimal point (e.g., 03 is 
a REN of 0.3).
An FCC compliant telephone line cable cord and modul ar plug is provided with this equipment. This 
equipment is designed to be connected to the  telephone network or premises wiring using a 
compatible modular jack which is Part 68 compli ant. See Installation instructions for details.
This equipment if it uses a telephone  receiver is hearing aid compatible.
Note
Canon recommends an individual line following indus try standards, such as the 2500 (touch-tone) or 
500 (rotary/pulse dial) telephones. A dedicated exte nsion off a PBX (Private Branch Exchange) unit 
without “Call Waiting” can be used with t he machine. Button telephone systems are not 
recommended because they send nonstandard si gnals to individual telephones for ringing and 
special codes, which may cause a fax error.
 
						

							
Chapter 10 161Appendix
This equipment may not be used on coin service provided by the telephone company. Connection to 
party lines is subjected to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur whic h cannot be corrected by the procedures described in this guide, 
disconnect the equipment from the telephone line c able, turn off the power and disconnect the power 
cord. The telephone line cable should not be reconnect ed or the main power switch turned ON until 
the problem is completely resolved. Users shoul d contact their local authorized Canon Facsimile 
Service Dealer for the servicing of equipment.
Rights of the Telephone Company
If this equipment causes harm to the telephone network, the telephone company may temporarily 
disconnect service. The telephone comp any also retains the right to make changes in facilities and 
services that may affect the operation of th is equipment. When such changes are necessary, the 
telephone company is required to give adequate prior  notice to the user. However, if advance notice 
is not possible, the telephone company will notif y the customer as soon as possible. Also, the 
customer will be advised of his/her right to file  a complaint with the FCC if he/she believes it is 
necessary.
In order to program this information into your  machine, you should complete the procedure to 
register your name, units telephone number, time, and date.
FCC Notice
Model Number: K10269
This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two 
conditions: 
(1)This device may not cause harmful interference, and 
(2) this device must accept any interference  received, including interference that may cause 
undesired operation. 
Warning
The Telephone Consumer Protection Act of 1991 makes  it unlawful for any person to use a computer 
or other electronic device to send any mess age via a telephone facsimile machine unless such 
message clearly contains in a margin at the top  or bottom of each transmitted page, or on the first 
page of the transmission, the date and time it is  sent and an identification of the business or other 
entity, or other individual sending the message  and the telephone number of the sending machine or 
such business, other entity, or individual.
 
						

							
162Chapter 10Appendix
Note
This equipment has been tested and found to comply with the limits for a class B digital device, 
pursuant to Part 15 of the FCC Rules. These limi ts are designed to provide reasonable protection 
against harmful interference in a residential inst allation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed  and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular inst allation. If this equipment does cause harmful 
interference to radio or television reception, wh ich can be determined by turning the equipment off 
and on, the user is encouraged to try to correct t he interference by one or more of the following 
measures: 
– Reorient or relocate the receiving antenna. 
– Increase the separation betw een the equipment and receiver. 
– Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
– Consult the dealer or an experienc ed radio/TV technician for help. 
Use of shielded cable is required to comply with cl ass B limits in Subpart B of Part 15 of the FCC 
Rules. 
Warning
Do not make any changes or modifications to the  equipment unless otherwise specified in this guide. 
If such changes or modifications should be made,  you could be required to stop operation of the 
equipment. 
 
						

							
Chapter 10 163Appendix
Canon U.S.A., INC. LIMITED WARRANTY --- (USA 
Only)
The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to 
the new or refurbished Canonbrand product (“Product ”) packaged with this limited warranty, when 
purchased and used in the United States only.
The Product is warranted against defects in  materials and workmanship under normal use and 
service (a) for a period of one (1) year from the dat e of original purchase when delivered to you in 
new condition in its original container or (b) fo r 90 days from the date of original purchase for 
refurbished Products. Defective parts or a defectiv e Product returned to a Canon USA repair facility 
or a Canon USA Authorized Servic e Facility (“ASF”), and proven to be defective upon inspection will 
be (a) repaired; (b) exchanged for new or comparabl e rebuilt, recovered, remanufactured, repaired 
and/or recycled parts or; (c) exchanged for a refu rbished Product, as determined by the Canon USA 
repair facility or the ASF. Warranty repair or repl acement shall not extend the original warranty period 
of the Product. A dated proof of purchase is required at  the time of warranty service. A copy of your 
dated bill of sale will satisfy this requirement.  This warranty does not cover any accessories, or any 
consumables, such as paper or ink cartridges, as to which there shall be no warranty or 
replacement.
This limited warranty shall only apply if the Pr oduct is used in conjunction with compatible 
computers, peripheral equipment and software. Canon USA shall have no responsibility for such 
items except for compatible Canon brand peripheral equipment covered by a separate warranty 
(“Separate Warranty”). Repairs of such Canon brand peripheral equipment shall be governed by the 
terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed 
with the Product are sold “as is” and without  warranty of any kind by Canon USA, including any 
implied warranty regarding merchantability or fitness  for a particular purpose, and all such warranties 
are disclaimed. The sole warranty, if any, with  respect to such non- Canon brand items is given by 
the manufacturer or producer thereof.
This limited warranty covers all defects encounter ed in normal use of the Product and does not apply 
in the following cases:
(a) Loss of or damage to the Product due to  abuse, neglect, mishandling, improper packaging by 
you, alteration, accident, electrical  current fluctuations, improper use,  failure to follow operating or 
maintenance instructions in, or environmental c onditions prescribed in, Canon USA’s user’s manual 
or other documentation, or servic es performed by someone other than a Canon USA repair facility or 
ASF. Without limiting the foregoing, dropping th e Product, scratches, and abrasions will be 
presumed to have resulted from misuse, abuse or  failure to operate the Product as set forth in the 
user’s manual or other documentation for the Product.
(b) Use of parts, media, software or supplies (other than those sold by Canon USA), including non-
Canon ink cartridges or refilled ink cartridges , that cause damage to the Product or cause 
abnormally frequent service calls or service problems.
(c) If the Product has had its serial number or dating defaced, altered or removed.
ANY SYSTEM SOFTWARE (WHETHER FACT ORY LOADED ON THE PRODUCT OR 
CONTAINED ON THE SOFTWARE DISKETTE S OR CDROMS ENCLOSED WITH, OR 
ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR 
FOR THE PRODUCT, IS SOLD  AS IS AND WITHOUT WARRANTY BY CANON USA. THE SOLE 
WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE 
MANUFACTURERS LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY 
LIMITATIONS AND DISCLAIMERS THEREON.  PLEASE CONTACT CANON USA IMMEDIATELY 
IF YOU HAVE NOT RECEIVED A COPY OF  THE SOFTWARE MANUFACTURERS LICENSE 
AGREEMENT.
 
						

							
164Chapter 10Appendix
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE 
APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO 
OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY 
ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON USA, OR 
ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA 
SHALL NOT BE LIABLE FOR LOSS OF REVENU ES OR PROFITS, INCONVENIENCE, EXPENSE 
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION 
OF DATA, OR ANY OTHER SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES CAUSED 
BY THE USE, MISUSE, OR INABILITY TO  USE THE PRODUCT REGARDLESS OF THE LEGAL 
THEORY ON WHICH THE CLAIM IS BASED, AND  EVEN IF CANON USA OR ITS ASF HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND 
AGAINST CANON USA OR ITS ASF BE GREATE R IN AMOUNT THAN THE PURCHASE PRICE 
OF THE PRODUCT CAUSING THE ALLEGED DAMA GE. WITHOUT LIMITING THE FOREGOING, 
YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR 
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, 
USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED 
SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATI ON OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS 
LIMITED WARRANTY SHALL NOT EXTEND TO  ANYONE OTHER THAN THE ORIGINAL 
PURCHASER OF THE PRODUCT OR THE PERSO N FOR WHOM IT WAS PURCHASED AS A 
GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
Canon USA offers a range of customer technical support* options:
z Interactive troubleshooting, e-mail technical s upport, the latest driver downloads and answers to 
frequently asked questions ( www.canontechsupport.com
)
z Toll-free live technical support Monday —Saturday (excluding holidays) at 1-800-828-4040
z Telephone Device for the Deaf ( TDD-1-866-251-3752)
z Repair or Exchange Service Options:
In the event service is required for the Product during the limited warranty period, Canon USA offers 
two hardware support options:
Authorized Service Facility Carry-In / Mail-In Service
Canon USA’s Carry-In/Mail-In Service provides repa ir or exchange, at Canon USA’s option, through 
Canon USA’s Authorized Service Facility (ASF ) network. The name and telephone number of the 
ASF(s) near you may be obtained from Canon USA’s Web site at  www.canontechsupport.com
 or 
by calling the Canon USA Customer Care Center  at 1-800-828-4040, or any time while speaking to a 
technical support person. A Product covered by this  limited warranty will be repaired or exchanged, 
as determined by Canon USA, and returned without charge by the ASF.
InstantExchange Service **
A Canon Customer Care Center or ASF technician wi ll attempt to diagnose the nature of the problem 
and, if possible, correct it over the telephone. If t he problem cannot be corrected over the telephone, 
and you elect the InstantExchange option, a refer ence number will be issued to you. You will be 
asked for the Product serial number and other info rmation pertaining to your defective Product and 
for a ship-to location for the replacement Product (must include street address).
The Canon USA repair facility will ship out the r eplacement Product, via 2nd day Air freight service, 
prepaid by Canon USA. After receipt of the repl acement Product (with instructions and a prepaid 
waybill), follow the enclosed inst ructions on how to ship the defective Product to the Canon USA 
repair facility. The defective Product must be  returned in the shipping carton in which the 
replacement Product was packed and include  the reference number, A COPY OF YOUR DATED 
PROOF OF PURCHASE (BILL OF SALE), and a co mplete explanation of the problem. DO NOT 
INCLUDE ANY OTHER ITEMS WITH THE DEFECTIVE PRODUCT IN THE RETURN SHIPPING 
 
						

							
Chapter 10 165Appendix
CARTON, AND BE SURE TO RETAIN YOUR PRINTHEAD AND INK CARTRIDGE(S) AND 
TANK(S). InstantExchange Service expedites, usually by the second business day, the exchange of 
a defective Product with a replacement Product, whic h will normally be shipped the same day if your 
request for this service is by 3 p.m. E.T. Monday  through Friday, except holidays (three (3) business 
day InstantExchange Service for Alaska and Ha waii). Canon USA does not guarantee expedited 
shipping service in the event of the occurrenc e of factors beyond its reasonable control. The 
replacement Product you receive may be a refurbis hed or reconditioned unit and will be covered for 
the balance of the period remaining on your original  limited warranty. NOTE THAT BY USING THIS 
SERVICE YOU WILL KEEP THE REPLACEMENT PR ODUCT THAT IS SENT TO YOU. CANON 
USA WILL RETAIN THE DEFECTIVE PRODUCT THAT YOU ORIGINALLY PURCHASED, WHICH 
SHALL BECOME THE PROPERTY OF CANON USA.  InstantExchange warranty program service is 
available only during the express  limited-warranty period for your Product and only in the continental 
United States, Alaska and Hawaii during such period.
This limited warranty gives you specific legal righ ts, and you may also have other rights, which vary 
from state to state.
* Support program specifics are subject to change without notice.
** InstantExchange warranty service is subject to the  availability of refurbished or new replacement 
units.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
USA
©2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and 
may also be a registered trademark in other countries.
 
						

							
166Chapter 10Appendix
Users in Canada
Pre-Installation Requirements for Canon Facsimile 
Equipment
A. Location
Supply a suitable table, cabinet, or desk for t he machine. See the Appendix for the machine’s 
specific dimensions and weight.
B. Order Information
1. Provide only a single line touch-tone or rota ry telephone set terminated with a standard 6-pin 
modular telephone plug. (Touch-tone is re commended if available in your area.)
2. Order a CA11A modular wall jack, which s hould be installed by the telephone company. If the 
CA11A modular wall jack is not present, installation cannot occur.
3. Order a normal business line from your te lephone company’s business representative. The 
line should be a regular voice  grade line or an equivalent one. Use one line per machine.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Di al) line if you communicate overseas
C. Power Requirements The power outlet should be a two-prong grounded receptacle (Single or Duplex). It should be 
independent from copiers, heaters,  air conditioners or any electric equipment that is 
thermostatically controlled. The rated val ue is 120 volts and 15 amperes. The CA11A modular 
jack should be relatively cl ose to the power outlet to facilitate installation.
Notice
This equipment meets the applicable Indu stry Canada terminal Specifications.
Avis
Le présent matériel est conforme aux spécific ations techniques applicables dIndustrie Canada.
Before installing this equipment, users should ensur e that it is permitted to be connected to the 
facilities of the local telecommunications company. The equipment must also be installed using 
an acceptable method of connection. In some  cases, the companys inside wiring associated 
with a single-line individual se rvice may be extended by means of a certified connector assembly 
(telephone extension cord). The customer shou ld be aware that compliance with the above 
conditions may not prevent degradation  of service in some situations.
The Ringer Equivalence Number is  an indication of the maximum number of devices allowed to 
be connected to a telephone interface. The term ination on an interface may consist of any 
combination of devices subject  only to the requirement that the sum of the RENs of all the 
devices does not exceed five.
Even if the dual-line option is install ed, the REN is applicable to each port.
Avis
Note
Canon recommends an individual line  following industry standards, such as the 2500 (touch-tone) or 
500 (rotary / pulse dial) telephones. A dedicated ext ension off a PBX (Private Branch Exchange) unit 
without “Call Waiting” can be used with your  facsimile unit. Button telephone systems are not 
recommended because they send non-standard si gnals to individual telephones for ringing and 
special codes, which may cause a fax error.
 
						

							
Chapter 10 167Appendix
Lindice déquivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui 
peuvent être raccordés à une interface télép honique. La terminaison dune interface peut 
consister en une combinaison  quelconque de dispositifs, à la  seule condition que la somme 
dindices déquivalence de la sonnerie de  tous les dispositifs nexcède pas 5.
Repairs to certified equipment should be made by  an authorized Canadian maintenance facility 
designated by the supplier. Any repairs or altera tions made by the user to this equipment, or 
equipment malfunctions, may give the telecommuni cations company cause to request the user 
to disconnect the equipment.
Users should ensure for their own protection that  the electrical ground connections of the power 
utility, telephone lines and internal  metallic water pipe system, if present, are connected together. 
This precaution may be particular ly important in rural areas.
Customer Technical Supports
Canon Canada Inc., offers a full range of customer technical support* options:
zFor interactive troubleshooting, e-mail technical  support, the latest driver downloads and answers 
to frequently asked questions (www.canon.ca)
z Free live technical support Mon - Fri 9am-8pm  EST (excluding holidays) for products still under 
warranty (1-800-OK-CANON)
z The location of the authorized service  facility nearest you (1-800-OK-CANON) 
If the problem cannot be corrected by using one  of the above technical support options, repair 
options are available at the time  of your call to the Free live technical support number above or via 
the website at www.canon.ca
* Support program specifics are subject to change without notice.
CANON CANADA INC.
1-800-OK-CANON (1-800-652-2666)
http://www.canon.ca
Caution
z Users should not attempt to make such connec tions themselves, but should contact the 
appropriate electric inspection author ity, or electrician, as appropriate.
z This Class B digital apparatu s meets all requirements of the Canadian Interference-Causing 
Equipment Regulations.
z Cet appareil numérique de la classe B respecte tout es les exigences du Règlement sur le matériel 
brouilleur du Canada.
 
						

							
168Chapter 10Appendix
Users in New Zealand
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has 
accepted that the item complies with the mini mum conditions for connection to its network. It 
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above 
all, it provides no assurance that any item will work  correctly in all respects with another item of 
Telepermitted equipment of a different make or  model, nor does it imply that any product is 
compatible with all of Telecoms network services.
Telepermitted equipment only may be connected to  the auxiliary telephone port. The auxiliary 
telephone port is not specifical ly designed for 3-wire-connected equipment. 3-wire-connected 
equipment might not respond to incoming ringing when attached to this port.
The automatic calling functions of this equipment  must not be used to cause a nuisance to other 
Telecom customers.
This equipment may not provide for the effective hand-over of a call to or from a telephone 
connected to the same line.
This device may be subject to ringi ng or bell tinkle when certain other devices are connected to the 
same line. If this occurs, the problem should  not be referred to the Telecom Faults Service.