Canon Lbp 3200 User Guide
Have a look at the manual Canon Lbp 3200 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
Installing the CAPT Software3-13
Setting Up the Printing Environment
3
10If the supplied User Software for LBP3200 CD-ROM is not in
the CD-ROM drive, put it into the CD-ROM drive.
11Select [Search for the best driver for your device.
(Recommended).], remove a checkmark from [Removable
Media (Floppy, CD-ROM…)] and place a checkmark for
[Specify a location].
If you are using Windows 98, remove a checkmark from [Floppy disk drives] and
[CD-ROM drive], and place a checkmark for [Specify a location]....](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-95.png "Page 96
Installing the CAPT Software3-13
Setting Up the Printing Environment
3
10If the supplied User Software for LBP3200 CD-ROM is not in
the CD-ROM drive, put it into the CD-ROM drive.
11Select [Search for the best driver for your device.
(Recommended).], remove a checkmark from [Removable
Media (Floppy, CD-ROM…)] and place a checkmark for
[Specify a location].
If you are using Windows 98, remove a checkmark from [Floppy disk drives] and
[CD-ROM drive], and place a checkmark for [Specify a location]....")
![Page 97
Installing the CAPT Software3-14
Setting Up the Printing Environment
3
13Make sure that the correct folder is displayed in [Specify a
location], and then click [Next].
14Click [Next].
15Enter a new name in [Printer name] if you want to change the
printer name.
If another printer driver has been already installed in the computer, the message
will appear. In this case, select [Yes] or [No].](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-96.png "Page 97
Installing the CAPT Software3-14
Setting Up the Printing Environment
3
13Make sure that the correct folder is displayed in [Specify a
location], and then click [Next].
14Click [Next].
15Enter a new name in [Printer name] if you want to change the
printer name.
If another printer driver has been already installed in the computer, the message
will appear. In this case, select [Yes] or [No].")
![Page 98
Installing the CAPT Software3-15
Setting Up the Printing Environment
3
16Click [Finish].
Copying files will be started.
17When the dialog box for completing installation appears, click
[OK].
The [Add New Hardware Wizard] dialog box will appear.
18Click [Finish].
The installation of the USB class driver and the printer driver is completed.](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-97.png "Page 98
Installing the CAPT Software3-15
Setting Up the Printing Environment
3
16Click [Finish].
Copying files will be started.
17When the dialog box for completing installation appears, click
[OK].
The [Add New Hardware Wizard] dialog box will appear.
18Click [Finish].
The installation of the USB class driver and the printer driver is completed.")
![Page 100
Installing the CAPT Software3-17
Setting Up the Printing Environment
3
6Click [Install a Printer Driver].
The dialog box for confirming the language will appear.
7Confirm the language and click [OK].
The preparation for installation will start.
8When the screen shown below appears, turn ON the printer.
In order to turn ON the printer, press of the power switch.
The installation of the printer driver and the USB class driver will start
automatically.
ON
OFF](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-99.png "Page 100
Installing the CAPT Software3-17
Setting Up the Printing Environment
3
6Click [Install a Printer Driver].
The dialog box for confirming the language will appear.
7Confirm the language and click [OK].
The preparation for installation will start.
8When the screen shown below appears, turn ON the printer.
In order to turn ON the printer, press of the power switch.
The installation of the printer driver and the USB class driver will start
automatically.
ON
OFF")
![Page 101
Installing the CAPT Software3-18
Setting Up the Printing Environment
3
9When the screen shown below appears, click [OK].
The installation of the USB class driver and the printer driver is completed.
Installing with Plug and Play
IMPORTANT
Before installing the CAPT software with Plug and Play, make sure that the printer is
properly connected to your computer and that the printer is turned ON.
1Turn ON the computer and start up Windows 2000.
2Log on by a user who has an administrators permission.
NOTE...](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-100.png "Page 101
Installing the CAPT Software3-18
Setting Up the Printing Environment
3
9When the screen shown below appears, click [OK].
The installation of the USB class driver and the printer driver is completed.
Installing with Plug and Play
IMPORTANT
Before installing the CAPT software with Plug and Play, make sure that the printer is
properly connected to your computer and that the printer is turned ON.
1Turn ON the computer and start up Windows 2000.
2Log on by a user who has an administrators permission.
NOTE...")
![Page 102
Installing the CAPT Software3-19
Setting Up the Printing Environment
3
4Select [Search for a suitable driver for my device
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.
5Remove a checkmark from [Floppy disk drives] and [CD-ROM
drives], place a checkmark for [Specify a location], and then
click [Next].](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-101.png "Page 102
Installing the CAPT Software3-19
Setting Up the Printing Environment
3
4Select [Search for a suitable driver for my device
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.
5Remove a checkmark from [Floppy disk drives] and [CD-ROM
drives], place a checkmark for [Specify a location], and then
click [Next].")
![Page 103
Installing the CAPT Software3-20
Setting Up the Printing Environment
3
6Put the User Software for LBP3200 CD-ROM into the
CD-ROM drive, then click [Browse].
7If your CD-ROM drive is drive [D:], select
[D:\English\Win2K_XP]. Select [CAP4STK.INF], then click
[Open].
8Make sure that the selected folder is displayed in [Copy
manufacturers files from], then click [OK].
The dialog box for completing the search for a driver file will appear.](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-102.png "Page 103
Installing the CAPT Software3-20
Setting Up the Printing Environment
3
6Put the User Software for LBP3200 CD-ROM into the
CD-ROM drive, then click [Browse].
7If your CD-ROM drive is drive [D:], select
[D:\English\Win2K_XP]. Select [CAP4STK.INF], then click
[Open].
8Make sure that the selected folder is displayed in [Copy
manufacturers files from], then click [OK].
The dialog box for completing the search for a driver file will appear.")
![Page 104
Installing the CAPT Software3-21
Setting Up the Printing Environment
3
9Click [Next].
Copying files will be started.
NOTE
Click [Yes] if the [Digital Signature Not Found] dialog box is displayed.
10When the screen shown below appears, click [OK].
The [Found New Hardware Wizard] dialog box will appear.
11Click [Finish].
The installation of the USB class driver and the printer driver is completed.](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-103.png "Page 104
Installing the CAPT Software3-21
Setting Up the Printing Environment
3
9Click [Next].
Copying files will be started.
NOTE
Click [Yes] if the [Digital Signature Not Found] dialog box is displayed.
10When the screen shown below appears, click [OK].
The [Found New Hardware Wizard] dialog box will appear.
11Click [Finish].
The installation of the USB class driver and the printer driver is completed.")
![Page 106
Installing the CAPT Software3-23
Setting Up the Printing Environment
3
6Click [Install a Printer Driver].
The dialog box for confirming the language will appear.
7Confirm the language and click [OK].
The preparation for installation will start.
8When the screen shown below appears, turn ON the printer.
In order to turn ON the printer, press of the power switch.
Installation of the printer driver and the USB class driver will start automatically.
ON
OFF](http://img.usermanuals.tech/thumb/14/56535/w64_canon_lbp-3200-user-guide-105.png "Page 106
Installing the CAPT Software3-23
Setting Up the Printing Environment
3
6Click [Install a Printer Driver].
The dialog box for confirming the language will appear.
7Confirm the language and click [OK].
The preparation for installation will start.
8When the screen shown below appears, turn ON the printer.
In order to turn ON the printer, press of the power switch.
Installation of the printer driver and the USB class driver will start automatically.
ON
OFF")
Installing the CAPT Software3-18 Setting Up the Printing Environment 3 9When the screen shown below appears, click [OK]. The installation of the USB class driver and the printer driver is completed. Installing with Plug and Play IMPORTANT Before installing the CAPT software with Plug and Play, make sure that the printer is properly connected to your computer and that the printer is turned ON. 1Turn ON the computer and start up Windows 2000. 2Log on by a user who has an administrators permission. NOTE Full Control Permission is required for the installation of the printer driver. 3Click [Next].
Installing the CAPT Software3-19 Setting Up the Printing Environment 3 4Select [Search for a suitable driver for my device (recommended)], then click [Next]. NOTE [Unknown] may be displayed as the name of the device. 5Remove a checkmark from [Floppy disk drives] and [CD-ROM drives], place a checkmark for [Specify a location], and then click [Next].
Installing the CAPT Software3-20 Setting Up the Printing Environment 3 6Put the User Software for LBP3200 CD-ROM into the CD-ROM drive, then click [Browse]. 7If your CD-ROM drive is drive [D:], select [D:\English\Win2K_XP]. Select [CAP4STK.INF], then click [Open]. 8Make sure that the selected folder is displayed in [Copy manufacturers files from], then click [OK]. The dialog box for completing the search for a driver file will appear.
Installing the CAPT Software3-21 Setting Up the Printing Environment 3 9Click [Next]. Copying files will be started. NOTE Click [Yes] if the [Digital Signature Not Found] dialog box is displayed. 10When the screen shown below appears, click [OK]. The [Found New Hardware Wizard] dialog box will appear. 11Click [Finish]. The installation of the USB class driver and the printer driver is completed.
Installing the CAPT Software3-22 Setting Up the Printing Environment 3 For Windows XP Installing from the CD-ROM 1Make sure that the power switch is turned OFF. IMPORTANT Do not turn ON the printer until Step 8 during installation procedure. 2Connect the printer to the computer with the USB cable. 3Turn ON the computer and start up Windows XP. 4Log on by a user who has an administrators permission. NOTE Full Control Permission is required for the installation of the printer driver. 5Put the supplied User Software for LBP3200 CD-ROM into the CD-ROM drive. If the CD-ROM is already set in the drive, take it out and put it into again. The CD-ROM menu will appear automatically. NOTE If the CD-ROM menu does not appear automatically, select [Run] under the [Start] menu, enter D:\English\CAP4MNU.exe, and click [OK]. (The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer being used.)
Installing the CAPT Software3-23 Setting Up the Printing Environment 3 6Click [Install a Printer Driver]. The dialog box for confirming the language will appear. 7Confirm the language and click [OK]. The preparation for installation will start. 8When the screen shown below appears, turn ON the printer. In order to turn ON the printer, press of the power switch. Installation of the printer driver and the USB class driver will start automatically. ON OFF
Installing the CAPT Software3-24 Setting Up the Printing Environment 3 9When the screen shown below appears, click [OK]. IMPORTANT Windows XP Service Pack 2 and other operating systems have the feature that blocks unauthorized access over the network to protect your computer (Windows Firewall). Because of this, you need to configure Windows Firewall to allow access when you are using the printer on an operating system that is equipped with Windows Firewall. (This configuration operation is only needed when using the printer in a network environment.) For details, refer to the file note_ex.pdf that is included in the [English] folder on the supplied User Software for LBP3200 CD-ROM. The installation of the USB class driver and the printer driver is completed. Installing with Plug and Play IMPORTANT Before installing the CAPT software with Plug and Play, make sure that the printer is properly connected to your computer and that the printer is turned ON. 1Turn ON the computer and start up Windows XP. 2Log on by a user who has an administrators permission. NOTE Full Control Permission is required for the installation of the printer driver.
Installing the CAPT Software3-25 Setting Up the Printing Environment 3 3Select [Install from a list or specific location (Advanced)], put the supplied User Software for LBP3200 CD-ROM into the CD-ROM drive, then click [Next]. 4Select the search method and folder to browse. ❑Select [Search for the best driver in these locations]. ❑Remove a checkmark from [Search removable media (floppy, CD-ROM…)]. ❑Place a checkmark for [Include this location in the search]. ❑Click [Browse], then select a folder. If your CD-ROM drive is drive [D:], select [D:\English\Win2K_XP]. ❑Click [OK].
Installing the CAPT Software3-26 Setting Up the Printing Environment 3 5Make sure that the selected folder is displayed in [Include this location in the search], then click [Next]. The installation process will be displayed. NOTE Click [Continue Anyway] if the [Hardware Installation] dialog box is displayed. 6When the screen shown below appears, click [OK]. The [Found New Hardware Wizard] dialog box will appear. 7Click [Finish].
Installing the CAPT Software3-27 Setting Up the Printing Environment 3 IMPORTANT Windows XP Service Pack 2 and other operating systems have the feature that blocks unauthorized access over the network to protect your computer (Windows Firewall). Because of this, you need to configure Windows Firewall to allow access when you are using the printer on an operating system that is equipped with Windows Firewall. (This configuration operation is only needed when using the printer in a network environment.) For details, refer to the file note_ex.pdf that is included in the [English] folder on the supplied User Software for LBP3200 CD-ROM. The installation of the USB class driver and the printer driver is completed.