Brother Hl 3260n User Manual

							APPENDICES
Appendix–29
   When EAN 8, EAN 13, or UPC A is selected with the parameter “t5” or “T5”:
Ten numerical characters “0” to “9” can be accepted as bar code data. The
number of characters for bar codes is limited as follows.
EAN 8: Total 8 digits (7 digits + 1 check digit)
EAN 13: Total 13 digits (12 digits + 1 check digit)
UPC A: Total 12 digits (11 digits + 1 check digit)
A number of characters other than above causes data error and the bar
code data is printed as normal print data. If the check digit is incorrect, the
printer calculates the correct check digit automatically so that the correct bar
code data will be printed. When EAN13 is selected, adding “+” and a 2-or 5-
digit number after the data can create an add-on code.
   When UPC-E is selected with the parameter “t6” or “T6”:
The numerical characters “0” to “9” can be accepted as bar code data.
(1) 8 digits Standard format. The first character
must be “0” and the data must be terminated by
a check digit.
Total 8 digits = “0” + 6 digits + 1 check digit.
(2) 6 digits The first character and the last
check digit are removed from the 8 digit data.
   *1: For 8 digits, “?” can be used in place of a check digit.
   *2: Adding “+” and 2- or 5-digit number after the data creates
an add-on code for all 6 and 8 digit formats.
   When Codabar is selected with the parameter “t9” or “T9”:
Characters “0” to “9”, “-”, “ . ”, “$”, “/”, “+”, “ : ” can be printed. Characters “A”
to “D” can be printed as a start-stop code, which can be uppercase or
lowercase. If there is no start-stop code, errors occur. A check digit cannot
be added and using “?” causes errors.
   When Code 128 Set A, Set B, or Set C is selected with the parameter “t12”
or “T12,” “t13” or “T13,” or “t14” or “T14” respectively:
Code 128 sets A, B and C are individually selectable. Set A encodes
characters Hex 00 … 5F. Set B encodes characters Hex 20 … 7F. Set C
encodes numeric pairs 00 … 99. Switching is allowed between the code
sets by sending %A, %B, or %C. FNC 1, 2, 3, and 4 are produced with %1,
%2, %3, and %4. The SHIFT code, %S, allows temporary switching (for 1
character only) from set A to set B and vice versa. The “%” character can be
encoded by sending it twice.
 
						

							Appendix–30
   When ISBN (EAN) is selected with the parameter “t130” or “T130”:
Same rules apply as for “t5” or “T5”
   When ISBN (UPC-E) is selected with the parameter “t131” or “T131”:
Same rules apply as for “t6” or “T6”
   When EAN 128 set A, set B or set C is selected with the parameter “t132” or
“T132”, “t133” or “T133” or “t134” or “T134” respectively:
Same rules apply as for “t12” or “T12”, “t13” or “T13”, or “t14” or “T14”.
Box Drawing
ESC i … E (or e)
“E” or “e” is a terminator.
Line Block Drawing
ESC i … V (or v)
“V” or “v” is a terminator.
Expanded Character Data Start
n = “l” or “L”
Data that follows “l” or “L” is read in as expanded character data (or labeling
data). Expanded character data must end with the “  ” code (5CH), which
also terminates this command.
[Example Program Listings]
WIDTH LPT1:,255
      CODE 39
      LPRINT CHR$(27);it0r1s0o0x00y00bCODE39?\;
      Interleaved 2 of 5
      LPRINT CHR$(27);it1r1s0o0x00y20b123456?\;
      FIM
      LPRINT CHR$(27);it3r1o0x00y40bA\;
 
						

							APPENDICES
Appendix–31
      Post Net
      LPRINT CHR$(27);it4r1o0x00y60b1234567890?\;
      EAN-8
      LPRINT CHR$(27);it5r1o0x00y70b1234567?\;
      UPC-A
      LPRINT CHR$(27);it5r1o0x50y70b12345678901?\;
      EAN-13
      LPRINT CHR$(27);it5r1o0x100y70b123456789012?\;
      UPC-E
      LPRINT CHR$(27);it6r1o0x150y70b0123456?\;
      Codabar
      LPRINT CHR$(27);it9r1s0o0x00y100bA123456A\;
      Code 128 set A
      LPRINT CHR$(27);it12r1o0x00y120bCODE128A12345?\;
      Code 128 set B
      LPRINT CHR$(27);it13r1o0x00y140bCODE128B12345?\;
      Code 128 set C
      LPRINT CHR$(27);it14r1o0x00y160b;CHR$(1);CHR$(2);?\;
      ISBN(EAN)
      LPRINTCHR$(27);it130r1o0x00y180b123456789012?+12345\;
      EAN 128 set A
      LPRINT CHR$(27);it132r1o0x00y210b1234567890?\;
      LPRINT CHR$(12)
      END
 
						

							INDEX
I
I
N
N
D
D
E
E
X
X
 
						

							INDEX
INDEX-1
-
- ..........................................................3-2
+
+ .........................................................3-2
+ &– switch .......................................3-14
A
accessory ...........................................2-7
alarm ................................................3-17
Analysis Tool Software......................2-16
automatic e-mail printing ..................2-14
automatic emulation selection ..........2-21
automatic interface selection ............2-23
B
back switch .........................................3-2
Back switch.......................................3-16
bar code control ....................Appendix-23
bonus software .................................2-14
BR-Admin Professional.....................2-16
Bridge unit ............................Appendix-10
Bridge Unit........................................4-44
Brother Storage Manager .................2-16
BR-Script 3 .........................................2-1
BR-Script 3 mode .............................3-34
C
caracter set ...........................Appendix-15
CD-ROM .............................................1-3
CD-ROM for Macintosh users.............1-5
cleaning ............................................5-13
compact flash memory card .............4-55
D
data ..................................................3-17
date and time setting ........................3-32
Device.................................................2-5
DIMM .......................................4-57, 4-59
drum .......................................Appendix-6
drum unit ............................................5-7
duplex .................................................2-4
duplex unit ........................................4-20
Duplex unit..............................Appendix-9
Duplex Unit .......................................6-20
E
emulation ................................Appendix-3
emulation mode ................................3-34envelop .............................................1-29
environment ......................................1-10
EPSON FX-850 mode ......................3-35
EPSON Mode ......................Appendix-17
error messages...................................6-1
F
factory setting ...................................2-24
factory settings .................................3-36
Finisher .............................................6-18
Finisher/Stapler...........4-50, Appendix-10
font list .................................Appendix-14
friction pad ........................................5-17
G
go switch ......................................3-2, 3-3
H
Hard Disk Drive.................................4-62
HDD ............................4-62, Appendix-10
HP LaserJet mode ............................3-34
HP LaserJet Mode ...............Appendix-17
HP-GL mode.....................................3-35
HP-GL Mode........................Appendix-18
I
IBM Mode ............................Appendix-18
IBM Proprinter XL mode ...................3-35
Interchange unit ............4-14, Appendix-8
IP address ........................................3-33
J
job cancel switch..........................3-2, 3-4
L
label ..................................................1-29
LCD ...........................................3-18, 6-1
LED...................................................3-17
loading paper ....................................1-20
Localization kit ....................................1-1
LT-5100 ..................4-4, 4-12, Appendix-7
LT-5200 ..................4-4, 4-12, Appendix-7
M
Macintosh .........................................2-19
mailbox .............................................6-17
Mailbox .........................4-43, Appendix-9
Mailbox unit.......................................4-39
maintenance messages ......................6-4
manual feed ......................................4-29
 
						

							INDEX
INDEX-2
memory ........................4-57, Appendix-2
multi-purpose tray4-29, 4-35, Appendix-8
O
OCR symbol set ...................Appendix-16
option..................................................4-1
Option .................................................2-5
P
pad ...................................................5-18
paper feed roller ...............................5-13
paper handling ..................................1-19
paper jam ...........................................6-8
paper size .........................................1-22
paper specification............................1-14
Parallel Interface Cable.......................1-2
PCL6 ..................................................2-1
power................................................3-17
power supply ......................................1-9
PPD .........................................2-19, 2-20
print media........................................1-14
print quality .......................................6-24
print speed..............................Appendix-1
printer driver ............2-1, 2-2, Appendix-4
printer status message .....................3-19
private data .......................................3-11
proof data ...........................................3-9
public data ........................................3-10
R
RAM ...........................4-57, Appendix-10
ready ................................................3-17Rear View ...........................................1-7
reprint .................................2-6, 2-13, 3-6
reprint switch................................3-2, 3-6
resolution ...............................Appendix-1
S
secure print .........................................3-5
secure print switch .......................3-2, 3-5
service call message ..........................6-5
set switch ............................................3-2
Set switch .........................................3-15
Sorter................................................4-43
special paper ....................................1-29
specification
.........................Appendix-1, Appendix-11
Stacker..............................................4-43
staple .........................................5-20, 6-6
switch ..................................................3-2
symbol list ............................Appendix-15
symbol/character set............Appendix-14
T
toner ......................................Appendix-6
toner bottle..........................................5-1
toner empty.........................................5-2
TRANSPARENCIES .........................1-31
transparency .....................................1-29
W
watermark ...........................................2-4