Avaya Partner Advanced Communications System Installation, Programming And Use Manual

Operator Features
Wake Up Service Button (#115)
7-21
Using Wake Up Service
To schedule a wake up call for a specific extension:
1. Press the Wake Up Service Button at extension 10.
The green light next to the Wake Up Service Button flutters. Wake Up Service is activated.
2. Dial the two-digit extension number of the desired extension (or use an Auto Dial button).
3. Enter the wake-up time in 24-hour notation. For example, to set the time to 2:15 p.m., press 
1415. When you have finished entering the...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Wake Up Service Button (#115)
7-22 

Contents
8-i
8
Programming & Using Telephone Features
Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-1
Extension Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-1

Dial-Code Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-2
Account Code Entry (F12) . . . . . . . . . . . . . . . . . . . . . . . . . ....

PA R T N E R® Advanced Communications System Installation, Programming, and Use
8-ii

Considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-17

Programming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-17
Caller ID Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-18

Caller ID Inspect (F17) . . . . . . . . . . ....

Contents
8-iii

Considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-40

Programming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-40

Using Group Pickup on a System Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-40

Using Group Pickup on a Single-Line Telephone . . . . . . . . . . . . . . . . . . . . . . . . .   8-40
Hotline  . . . . . . . . . . . . ....

PA R T N E R® Advanced Communications System Installation, Programming, and Use
8-iv

Using Station Lock on a System Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-59

Using Station Lock on a Single-Line Telephone . . . . . . . . . . . . . . . . . . . . . . . . . .   8-59
System Password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8-60

Considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Overview
8-1
8
Programming & Using Telephone 
Features
Overview
You can program many of the system’s features right from your telephone. When you program a 
feature from your telephone, you are using Extension Programming.
The features discussed in this chapter are features often programmed by individual users. 
However, they can be programmed by the System Administrator as well from a system display 
telephone at extension 10 or 11. Some of the features only show the instructions for using the 
feature...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Account Code Entry (F12)
8-2
Dial-Code Features 
You can access some features by dialing a feature code at the telephone dialpad. From a system 
telephone, you can dial 
f or i, followed by the two- or three-digit code (or press a 
programmed Auto Dial button). From a single-line telephone, you typically dial 
# followed by the 
two- or three-digit code when you have intercom dial tone. See Ta b l e A - 2 in Appendix A,...

Programming & Using Telephone Features
Account Code Entry (F12)
8-3

Use Forced Account Code Entry (#307) to identify system telephone extensions that are 
required to enter an account code prior to dialing any outside number (including those on the 
Emergency Phone Number List). A forced account code must be entered at the beginning of 
a call; however, a different account code can be entered any time during the call.

You can use Forced Account Code List (#409) to create a list of valid account codes,...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Account Code Entry (F12)
8-44. Press the programmed Account Code Entry button or press 
f12 to indicate the end 
of the code.
If the Account Code Entry button has lights, the green light turns off. 
5. Make the call, if you are not already on a call.
6. To change the account code, repeat Steps 2 through 4.
To enter or change a forced account code:
1. From a system telephone, if a password is programmed for the system, enter...