Yamaha Dtxpress 2 Instruction Manual

							49
Preset Song List
Trigger Setup List
No. Name Description
1 Medium Normal Setting
2 Dynamic Wide Dynamic Range however, sensitive to vibration.
3 Easy Averages irregular trigger levels, produces smoother sound
4 HH->BD A hi-hat controller connected to the trigger input jack “1 KICK” can be used as a kick pedal.
5 DT10/20 Use with DT10/20 drum triggers attached to acoustic drums.
Songs marked with a “
” will repeat.
Song Drum Kit
No.  Song Name No.  Kit Name
Demo
1 HighRise 1 Acoustic Kit
2 Horizon 1 Acoustic Kit
3 Crimson 1 Acoustic Kit
4 Latiniq 1 Acoustic Kit
5 Vbop2001 9 Bee Bop
6 JungleNY 35 Jungle NY
7 Muses 40 GM Standard1
Rock
8 Rock 1  
5 Rock Dry 2
9 Rock 2 3 Rock Kit
10 Rock 3 43 GM Rock
11 Rock 4 3 Rock Kit
12 Rock 5 4 Rock Dry 1
Hard Rock
13 HardRoc1 3 Rock Kit
14 HardRoc2 43 GM Rock
15 HardRoc3 43 GM Rock
16 HardRoc4 5 Rock Dry 2
Slow Rock
17 SlowRoc1 40 GM Standard1
18 SlowRoc2 40 GM Standard1
Pops
19 Pops 1  
1 Acoustic Kit
20 Pops 2 40 GM Standard1
21 Pops 3 40 GM Standard1
Pop Rock
22 PopRock1  
40 GM Standard1
23 PopRock2 43 GM Rock
24 PopRock3 1 Acoustic Kit
Dance
25 Dance 1  
14 Dance Kit2
26 Dance 2 1 Acoustic Kit
Shuffle
27 Shuffle1 40 GM Standard1
28 Shuffle2 1 Acoustic Kit
29 Shuffle3 13 Dance Kit1
Latin
30 Latin 1  
1 Acoustic Kit
31 Latin 2  
1 Acoustic Kit
Song Drum Kit
No.  Song Name No.  Kit Name
32 Latin 3 46 GM Jazz
33 Latin 4 1 Acoustic Kit
34 Latin 5 1 Acoustic Kit
Samba
35 Samba 1  
1 Acoustic Kit
36 Samba 2  
1 Acoustic Kit
37 Samba 3 40 GM Standard1
38 Samba 4 1 Acoustic Kit
Bossa Nova
39 Bossa 1  
1 Acoustic Kit
40 Bossa 2 1 Acoustic Kit
41 Bossa 3 1 Acoustic Kit
Jazz
42 Jazz 1  
46 GM Jazz
43 Jazz 2  
9 Bee Bop
44 Jazz 3  
9 Bee Bop
45 Jazz 4  
1 Acoustic Kit
46 Jazz 5 1 Acoustic Kit
47 Jazz 6 1 Acoustic Kit
R&B
48 R&B 1 1 Acoustic Kit
49 R&B 2 40 GM Standard1
50 R&B 3 10 Room Kit
51 R&B 4 40 GM Standard1
Rock’n Roll
52 RnR 1  
1 Acoustic Kit
53 RnR 2  
1 Acoustic Kit
54 RnR 3 40 GM Standard1
55 RnR 4 40 GM Standard1
Ballad
56 Ballad 1  
46 GM Jazz
57 Ballad 2 1 Acoustic Kit
58 Ballad 3 40 GM Standard1
Funk
59 Funk 1  
1 Acoustic Kit
60 Funk 2 12 Funky Sound
61 Funk 3 1 Acoustic Kit
62 Funk 4 1 Acoustic Kit
Second Line
63 2ndLine 1 Acoustic Kit
Song Drum Kit
No.  Song Name No.  Kit Name
Ska
64 Ska 2 New Beat
Soul
65 Soul 1 Acoustic Kit
Fusion
66 Fusion 1  
1 Acoustic Kit
67 Fusion 2  
1 Acoustic Kit
68 Fusion 3 40 GM Standard1
Polka
69 Polka 40 GM Standard1
Waltz
70 Waltz 42 GM Room
Reggae
71 Reggae 1 18 Reggae Kit
72 Reggae 2 18 Reggae Kit
Padsong
73 8Craze A  
30 8/8 Craze
74 8Craze B  
30 8/8 Craze
75 HJ Bass  
31 House Jazz
76 HJ Piano  
31 House Jazz
77 HJ Synth  
31 House Jazz
78 Suspens1  
34 Mistery...
79 Suspens2  
34 Mistery...
80 Suspens3  
34 Mistery...
81 NxtGene.  
29 In Da Hood
82 PadBass  
33 Bs.@Base
83 Jko?Naa  
33 Bs.@Base
84 HornGrv  
32 Groove Kit
85 BsGroov  
32 BsGroove
86 ShamanX  
38 Mondo Kit
87 Stepoff  
38 Mondo Kit
88 TriTown  
38 Mondo Kit
89 Peaceout  
38 Mondo Kit
90 Kinetic  
37 Jump Back
91 Thwak!  
37 Jump Back
92 Pulsar  
37 Jump Back
93 Photon  
37 Jump Back
94 Ganoosh  
39 Torq Kit
95 Babaj  
39 Torq Kit 
						

							50
MIDI Data Format
1. Channel Message
When the [3-2. Channel 10 Propgram Change/Channel Event Receive] (P. 31)
in the utility mode is set to “10=off ”, the DTXPRESS II will not receive channel
message for MIDI channel 10.
1.1 Key On Key OffSends and receives data.
Receive note range: C-2 to G8
Velocity range: 1 to 127 (note on only)
1.2 Control ChangeAll control change data for sequencer functions can be received and transmit-
ted. The following lists the tone generator functions and drum trigger functions.
1.2.1 bank select MSB-0Sends and receives data.
data=0:normal voice
data=127:drum voice
The data will not be processed unless program change data is received.
1.2.2 modulation (No. 1)Receives only.
1.2.3 foot controller (No. 4)Sends and receives data.
1.2.3 data entry (No. 6) Receives only. Used to specify RPN data.
1.2.5 main volume (No. 7)Sends and receives data.
1.2.6 pan (No. 10)Sends and receives data.
0 is the far left of a stereo image and 127 is the far right of a stereo image.
1.2.7 expression (No. 11)Receives only.
1.2.8 hold1 (No. 64)Receives only.
1.2.9 harmonic content (No. 71)Receives only.
1.2.10 release time (No. 72)Receives only.
1.2.11 attack time (No. 73)Receives only.
1.2.12 brightness (No. 74)Receives only.
1.2.13 portamento control (No. 84)Receives only.
1.2.14 effect 1 depth (No. 91)Receives only. Only effects the reverb send level.
1.2.15 data increment/decrement (No. 100/101)Receives only.
1.2.16 RPN00/00 pitch bend sensitivity: Receive only.
00/01 fine tuning: Receive only.
00/02 coarse tuning: Receive only.
7F/7F NULL: Receive only.
1.3 Channel Mode MessageAll channel mode messages are received only.
1.3.1 all sound off (No. 120)Mutes all the sounds currently playing through the specified channel.
1.3.2 reset all controllers (No. 121)Sets the following controller values back to its initial value:
pitch bend, modulation, expression, hold1, portament control,
RPN number
1.3.3 all note off (No. 123)Turns off all the notes of the specified channel currently on.
They will however, not be muted unless “hold 1” is turned off.
1.3.4 omni off (No. 124)Executes the same process as “all note off ”.
1.3.5 omni on (No. 125)Executes the same process as “all note off ”.
1.3.6 mono (No. 126)Executes the same process as “all sound off ”.
1.3.7 poly (No. 127)Executes the same process as “all sound off ”.
1.4 Program ChangeWhen the [3-3. Receive Propgram Change/System Exclusive Messages] (P. 31)
in the utility mode is set to “PC=off ”, the DTXPRESS II will not receive program
change data.
When the [3-2. Channel 10 Propgram Change/Channel Event Receive] (P. 31)
in the utility mode is set to “10PC=off ”, the DTXPRESS II will not receive MIDI
channel 10 program change data.
1.5 Pitch BendSends and receives data.
1.6 Channel AftertouchDoes not sends or receive data.
1.7 Polyphonic AftertouchDoes not sends or receive data.
2. System Exclusive Message
When the [3-3. Receive Propgram Change/System Exclusive Messages] (P. 31)
in the utility mode is set to “SySex=off ”, the DTXPRESS II will not receive sys-
tem exclusive messages.
The DTXPRESS II will not receive system exclusive messages that do not match
the device number set in the “DevNo=” of the [3-6. Device Number, Local Con-
trol] (P. 32) in the utility mode.
2.1 Parameter Change
2.1.1 GM system ON
F0 7E 7F 09 01 F7
Sets all the data except the MIDI master tuning data to its initial value.
Sends and receives data.
2.1.2 XG system ON
F0 43 1n 4C 00 00 7E 00 F7
“n” stands for device number.
Executes the same process as GM system ON.
Received only.
2.1.3 identify request
F0 7E 0n 06 01 F7
“n” stands for device number.
After receiving, the identify reply is transmitted.
Received only.
2.1.4 MIDI master volume
F0 7F 7F 04 01 XX mm F7
Ignores “XX”. “mm” is the volume.
Received only. 
						

							51
2.1.5 MIDI master tune
F0 43 1n 27 30 00 00 mm ll cc F7
“n” stands for device number.
The values of “mm(MSnible)” and “II(LSnible)”—128 is used for 1 cent unit
when tuning.
Received only.
2.1.6 identify reply
F0 7E 0n 06 02 43 00 4C 02 08 mm 00 00 00 F7
“n” stands for device number.
The software version number, $00, is added to mm.
Transmitted only.
2.1.7 display data
F0 43 1n 4C 06 00 ii dd*N F7
“n” stands for device number.
The software version number, $00, is added to mm.
ii Indicates the display starting position &00-$1F.
dd Is the ASCII code display data, a maximum of 32 bytes can be assigned
(multiple).
The specified character row can be displayed for a defined period of time
on the LCD. When multiple data are specified, they will be displayed in a
series at the specified location.
Received only.
2.1.8 clear all song
F0 43 7D 1n 44 54 00 F7
“n” stands for device number.
Deletes every user song.
2.1.9 remote SW
F0 43 7D 1n 52 53 data F7
“n” stands for device number.
Functions the same as the OFF/ON switch on the main panel.
Byte 0 to byte 5 ($0-$3f) of the data is the switch number, if byte 6 ($40) is
set to ON, it will be 1, if it is set to OFF, it will be 0.
2.1.10 parameter change
F0 43 7D 1n 44 4C p1 p2 p3 p4 data1 (data2) F7
“n” stands for device number.
Changes each of the unit’s parameters.
Use parameter numbers p1, p2, p3, and p4 to select the parameter type,
and use data1 and data2 to set the value.
When a type other than “user stack” is selected the data consists of one
byte, data2 does not exist. (There are some exceptions.)
In the case of user stack, data 1 is bit MS7 and data 2 is bit LS7 and
indicates the value $0000-$3FFF.
Received only.
2.2 Bulk DumpSends and receives data. All the data except the system data is converted into
1 or 2 byte ASCII characters and transmitted.
• DTXPRESS II bulk dump common message.
F0 43 7D Xn ss ss 44 54 58 4C(“DTXL”) tt tt tt tt ii ii jj jj dataBytes
csum F7
tt tt tt tt This displays the ID of the bulk type. 4 characters of ASCII
code.
ss ss data bytes (from model ID to data) MS7bit, LS7bit
ii ii data packet index number MS7bit, LS7bit
If the data size exceeds 4096, the total is divided into F0-F7
packets, the packet index number will start at 00 01 (0001)
increasing by 1 for each successive packet. The last packet
is 7F 7F (3FFF).
When the data size is less than 4096, it will be 00 00 (0000).
jj jj object number MS7bit, LS7bit
Object number. In the DTXPRESS II system only 1 article
exists, that will become 7F 7F (3FFF).
csumindicates the 7bit of the 2’s complement of the sum of the
data from the model ID (ss ss) to data Bytes.
2.2.1 system
F0 43 7D 0n ss ss 44 54 58 4C(“DTXL”) 53 59 53 54(“SYST”)
00 00 7F 7F data csum F7
2.2.2 map
F0 43 7D 0n ss ss 44 54 58 4C(“DTXL”) 55 4D 41 50(“UMAP”)
00 00 7F 7F data csum F7
2.2.3 drumkit
F0 43 7D 0n ss ss 44 54 58 4C(“DTXL”) 4B 49 54 32(“KIT2”)
00 00 jj jj data csum F7
jj jj Indicated by MS7bit, LS7bit. This number derived from the
user drum kit number by counting from “0”. In the case of the
edit buffer, it is 7F 7F (3FFF).
2.2.4 trigger
F0 43 7D 0n ss ss 44 54 58 4C(“DTXL”) 54 52 49 47(“TRIG”)
00 00 jj jj data csum F7
jj jj The user trigger’s number MS7bit, LS7bit.
7F 7F specifies the edit buffer
2.2.5 song
F0 43 7D 0n ss ss 44 54 58 4C(“DTXL”) 53 4F 4E 47(“SONG”)
ii ii jj jj data2 csum F7
jj jj The user song number’s MS7bit, LS7bit.
7F 7F specifies the current song.
data 2 Divides the original data into the 4 bits MSnibble, LSnibble,
and converts 1 byte data to 2 bytes.
2.3 Dump RequestReceives only.
Transmits the corresponding bulk dump.
F0 43 7D 2n 44 54 58 4C(“DTXL”) tt tt tt tt jj jj F7jj jj object number MS7bit, LS7bit
Object number. In the DTXPRESS II system only 1 article
exists, that will become 7F 7F (3FFF).
The object number contains the number that specifies the
drum kit number, etc.
Only one article exists, system data or edit buffer data, etc.,
that appoints 7F 7F (3FFF).
However, 7F 7F does not correspond in the case of song
data.
3. System common message
3.1 Select a song
f3 nn“nn” stands for song number.
Receives only.
4. Realtime message
Sends and receives data.
4.1 timing clockSynchronizes with the timing clock received when the Sync mode in the utility
mode’s [4-6. Sync Mode] (P. 34) is set to “ext” or “auto”.
4.2 start, continue, stopWhen the [4-4. MIDI Control] (P. 34) in the utility mode is set to “MIDI Control=off”,
the DTXPRESS II will not receive star t, continue and stop.
4.3 active sensingOnce active sensing data has been received, if no MIDI data is subsequently
received for longer than an interval of approximately 300 msec, the DTXPRESS
II will mute all the sounds.
Send the messages within an interval of approximately 300 msec.
MIDI Data Format 
						

							 
         
Transmitted Recognized Remarks 
       Function ... 
 
Mode 1 : OMNI ON,  POLY    Mode 2 : OMNI ON,  MONO         o : Yes
Mode 3 : OMNI OFF, POLY    Mode 4 : OMNI OFF, MONO         x : No Aux  :
All Sound Offxo 
     :Reset All Cntrlsxo 
     :Local ON/OFFoo
     :All Notes OFFx o(123-127) 
Mes- :Active Senseoo
sages:Resetxx System    :Clock    o                o
Real Time :Commands o                o System : Song Pos.  x                x
       : Song Sel.  x                o
Common : Tune       x                x System Exclusive    o                o Prog                o  0 - 127       o  0 - 127
Change : True #     **************        0,4,7,10,32  o                o
         1,6,11,64  x                o
          71,72,73  x                o
          74,84,91  x                o
           100,101  x                o
Control                                           
                                                   
Change                                              
  Pitch Bender        x                o                7 bit resolution After    Keys      x                x
Touch    Chs       x                xVelocity Note ON    o 9nH,v=1-127    o  v=1-127
         Note OFF   x 9nH,v=0        x Note                0 - 127          0 - 127
Number : True voice 0 - 127          0 - 127          Default    x                3
Mode     Messages   x                3
         Altered    **************   xBasic    Default    1 - 16           1 - 16            memorized
Channel  Changed    1 - 16           1 - 16  YAMAHA   [ Drum Trigger Module ]                      Date:11-Mar-2002
Model DTXPRESS II MIDI Implementation Chart  Version : 1.0
52 
						

							Type Gain Min Vel VelCurve SelfRej Rejection Spec.Rej In SPec.Rej Level
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9
IN 10
TRIGGER SETUP BLANK CHARTSetup Name
Inc Dec Input Excng
DRUMKIT BLANK CHARTDrumkit Name
Rev Type Rev Time
Rev Master Return
Volume Rev Send
Song Sel Tempo Sel HH Sens
Category
kick
kickR
snare
snrR1
snaR2
tom1
tom1R
tom2
tom2R
tom3
tom3R
ride
rideE
rideC
crash
crashEceashCopenopenRclose
closeR
footClVoice No. Volume Pan Tune C Tune F
Layer Balance
Decay Filter Note No. Channel Gate Time X Fade Rev Send Alt Group Key Assign Hold Mode Keyoff Function Song No.
Song Repeat
Song Mode
Rim to Pad
splashpad 9
pad 10Channel sw pc msb lsb vol pan
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 
						

							V930820  Printed in Japan
DTX Informationhttp://www.yamaha.co.jp /english/product /drum/dtx /index.html
EnglishFrançaisDeutschEspañol
DRUM TRIGGER  MODULE
Italiano
DRUM TRIGGER  MODULE
Owner’s Manual / Reference Guide
Mode d’emploi / Guide de référence
Bedienungsanleitung / Referenzhandbuch
Manual de instrucciones / Guía de referencia
Manuale dell’utente / Guide di riferimento
DRUM TRIGGER  MODULE
%5913&44@3FG$PWFS02.4.27, 4:43 PM Page 1EPCF
1BHF.BLFS
+11$