Xerox Workcentre 24 Pcl 6 Manual

4–37
USER GUIDE (MACHINE ADMINISTRATOR)
Color Balance - Yellow,
Magenta, Cyan, BlackThis sets up the default for each density level, Low Density, 
Medium Density, and High Density, for Yellow, Magenta, Cyan and 
Black in Color Balance on the Image Quality screen.
The defaults are all 0.
NOTE: The values set here will also be applied to Black and 
Single Color modes.
Original OrientationThis sets up the default for Original Orientation on the Scan 
Options screen. 
Enter the setting on the Numeric Keypad...

4–38
USER GUIDE (MACHINE ADMINISTRATOR)
Rotation DirectionSet the default for Rotation Direction when Always On or On 
during Auto is selected in Image Rotation on the Scan Options 
screen.  
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 1, Portrait Original - Left Edge.
NOTE:When the machine is equipped with a Finisher, the default 
will be 0, Auto.
SettingDescription
0Auto (can be selected only when the 
machine is equipped with Finisher)...

4–39
USER GUIDE (MACHINE ADMINISTRATOR)
Copy Control
This is the setting for Copy Control.
The following items can be set in Copy Control.
Auto Paper OffSet which tray will be selected when Auto % or Independent X-Y 
Auto is selected in Reduce/Enlarge when Auto is selected in 
Paper Supply, on the Basic Copying screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 1, Select Tray 1.
Memory Full ProcedureSet the processing method when the hard disk...

4–40
USER GUIDE (MACHINE ADMINISTRATOR)
Original Size Defaults
This sets up the original sizes that will be displayed when the 
Original Size is displayed from the Scan Options tab.
An original size can be assigned to Original Size Buttons 1 ~ 11. 
Setting frequently used non-standard size in advance prevents 
you from having to input the size each time. When you set up non-
standard sizes, the range for X direction is 15 ~ 432 mm and for Y 
direction is 15 ~ 297 mm.
Original Size Button 1 ~ 11The sizes...

4–41
USER GUIDE (MACHINE ADMINISTRATOR)
Setting Reduce/Enlarge Presets
This sets up the magnifications that will be displayed in Preset%, 
in Reduce/Enlarge on the Basic Copying screen. 18 different 
magnifications can be assigned to R/E Preset 1 ~ 7.
R/E Preset 1 ~ 7Assign magnifications to R/E Preset 1 ~ 7.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default for R/E Preset 1 is 25.0%.
SettingDescription
125.0%
235.3%
350.0%
457.7%
561.2%
664.7%
770.0%...

4–42
USER GUIDE (MACHINE ADMINISTRATOR)
Setting Custom Colors
This sets up the user registered colors used in Single Color and 
Dual Colors on the Output Color screen.
Custom Colors 1 ~ 6Assign user registered colors, Yellow (0~100%), Magenta 
(0~100%), Cyan (0~100%), to Custom Color Buttons 1 ~ 6. The 
default is 0.
NOTE: Adjust the registered color so that the sum of Yellow, 
Magenta and Cyan is 240% or less.
Network Settings
Network Settings consists of Port Setting, which determines the 
type of...

4–43
USER GUIDE (MACHINE ADMINISTRATOR)
Print Mode Settings
Memory volume for each interface, and printer-related settings 
can be set. Print Mode Settings consists of the following 
components.
Allocate MemorySet the size of the reception buffer, where data sent from the client 
is temporarily stored, for each interface.
OthersSet printing area, substitute tray, banner sheet, and banner sheet 
tray.
For more information on printer features, refer to the User Guide 
(Print). 

4–44
USER GUIDE (MACHINE ADMINISTRATOR)
Allocate Memory
Allocate Memory determines memory volume for the reception 
buffer, where the data transmitted from clients is stored, for each 
interface.
For LPD, SMB and IPP you can set whether or not to spool to 
memory, and where to spool. The assigned memory size when 
spooling to memory can also be configured (LPD and SMB only).  
The size of the reception buffer can be changed according to 
machines conditions and your requirements.  If the reception...

4–45
USER GUIDE (MACHINE ADMINISTRATOR)
Receiving Buffer-LPD
SpoolChoose from the following options:
•Off - Spooling is not performed. 
While the machine is processing or printing LPD data from a 
client, it cannot receive other data from other clients through 
the same interface.  The LPD reception buffer can be set 
between 64 ~ 1024 KB, in increments of 32 KB. The default is 
256 KB.
•Memory - Spooling is performed.  
Memory is used as the reception buffer for the spooling 
process.  The size of the...

4–46
USER GUIDE (MACHINE ADMINISTRATOR)
Receiving Buffer-SMB
SpoolChoose from the following options:
•Off - Spooling is not performed.  
While the machine is processing or printing SMB data from a 
client, it cannot receive other data from other clients through 
the same interface.  The SMB reception buffer can be set for 
64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
•Memory - Spooling is performed.  
Memory is used as the reception buffer for the spooling 
process.  The size of the...