Xerox Workcentre 24 Pcl 6 Manual

4–27
USER GUIDE (MACHINE ADMINISTRATOR)
NOTE: If No Default is selected, an Output Color must be selected 
for copy jobs, or the machine will not start copying. 
NOTE: If Black is selected on the Basic Copying screen, the copy 
output will have the same image quality as Halftone, selected in 
Text&Photo.
NOTE: When Dual Colors or Single Color is selected on the Basic 
Copying screen, the Original Type cannot be set.
Single ColorSet the default for Single Color on the Basic Copying screen.
Enter the...

4–28
USER GUIDE (MACHINE ADMINISTRATOR)
Reduce/EnlargeSets the default for Reduce/Enlarge on the Basic Copying screen.
Select one of nine buttons. Seven buttons are registered as preset 
ratio buttons, 100%, and Auto %.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 0, 100%.
NOTE: If the default for Paper Supply is set to Auto, Auto% cannot 
be selected for Reduce/Enlarge.
Paper SupplyThis sets the default for Paper Supply on the Basic Copying...

4–29
USER GUIDE (MACHINE ADMINISTRATOR)
2 SidedThis sets up the default for 2 Sided on the Basic Copying and 
Added Features screens.  
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 0, 1 to 1.
OutputThis sets up the default for Output on the Added Features screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 0, Auto.
Output DestinationThis sets up the Output Tray for copy and print...

4–30
USER GUIDE (MACHINE ADMINISTRATOR)
Margin Shift - Side 1This sets up the default for Side 1 in Margin Shift on the Added 
Features screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 0, No Shift.
SettingDescription
0No Shift
1Auto Center
2Corner Shift (Top Right)
3Corner Shift (Bottom Right)
4Corner Shift (Top Left)
5Corner Shift (Bottom Left)
6Corner Shift (Top Center)
7Corner Shift (Bottom Center)
8Corner Shift (Left Center)
9Corner...

4–31
USER GUIDE (MACHINE ADMINISTRATOR)
Margin Shift - Side 2This sets up the default for Side 2 in Margin Shift on the Added 
Features screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 10, Symmetrical with Side 1.
Border Erase - Top &
BottomThis sets up the default for the top and bottom Border Erase.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 5mm.
SettingDescription
0No Shift...

4–32
USER GUIDE (MACHINE ADMINISTRATOR)
Border Erase - Left & RightThis sets up the default for the left and right Border Erase.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 5mm.
Center EraseThis sets up the default for Center Erase. It is distributed along the 
center of the original image.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 0 mm.
SettingDescription
0None
1 ~ 50Set the border...

4–33
USER GUIDE (MACHINE ADMINISTRATOR)
Original Type (Auto/Full
Color)This sets up the default for Original Type on the Image Quality 
screen, when Auto or Full Color is selected as the color mode on 
the Basic Copying screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 1, Text & Photo (Halftone).
Original Type (Black)This sets up the default for Original Type on the Image Quality 
screen, when Black is selected as the Output Color on the...

4–34
USER GUIDE (MACHINE ADMINISTRATOR)
Auto ExposureThis sets up the default for Auto Exposure, when Text&Photo, 
Text, or Color Originals is selected in Original Type on the Image 
Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 1, Auto Exposure On.
Lighter/DarkerThis sets up the default for Lighter/Darker in Light/Dark/Contrast 
on the Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the...

4–35
USER GUIDE (MACHINE ADMINISTRATOR)
ContrastThis sets up the default for Contrast in Light/Dark/Contrast on the 
Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 2, Normal.
SharpnessThis sets up the default for Sharpness in Sharpness/Saturation on 
the Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 2, Normal.
SettingDescription
0Higher
1High...

4–36
USER GUIDE (MACHINE ADMINISTRATOR)
Color SaturationThis sets up the default for Color Saturation in Sharpness/
Saturation on the Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 2, Normal.
Color ShiftThis sets up the default for Color Shift on the Image Quality 
screen.  
Enter the setting on the Numeric Keypad using the numbers listed 
in the following table. The default is 2, Normal.
SettingDescription
0Higher
1High...