Vodavi Starplus Station User Guide

26 Background Music (Optional)
Background Music (Optional)
To activate Background Music:
1. Dial [632] or press the preprogrammed BGM flexible button. 
The LCD displays:
 LCD Display for Triad 1/2/3 and XTS Systems
LCD Display for Triad-S Systems
2. Enter desired channel on the keypad. A confirmation tone 
will sound, and the music is audible through the speaker.
3. Press Volume Bar to change the volume. The LCD displays:
To deactivate Background Music:
1. Dial [632] again or press BGM flexible button....

Call Back 27
Call Back
A station can initiate a call back request to another busy 
station. Once that station becomes idle, the station that left the 
call back request is signaled.
To leave a Call Back request when a number is busy:
1. Press the preprogrammed CALL BACK flexible button.
2. Replace the handset or press the ON/OFF button. When the 
busy station hangs up, you will be signaled.
3. Answer the call; the station you called will then be signaled. 
(If your station is busy when signaled, an...

28 Call Coverage
Call Coverage
The Call Coverage feature provides the functionality for 
stations to answer calls for other stations by utilizing call 
coverage buttons. Visual and Audible status of ringing stations 
to an assigned coverage station are provided.
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
3. Dial [647] for Non-Ringing or [646] for Ringing, followed by 
the station number to cover. A confirmation tone will 
sound.
After button is...

Call Coverage 29
One of the following messages will display after the call is 
answered.
Non-network system or in same Node:
Network system with call passed across a switch:
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call

SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot 
perform the call coverage function. The SLT extension need 
not be physically installed, only the SLT card must be...

30 Call Forward
Call Forward
The Call Forward feature allows a station the ability to have 
calls (internal or external) forwarded to a designated station, an 
ACD or UCD group pilot number, Voice Mail group number, or 
Hunt group. This feature must be enabled in admin 
programming.
To activate Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Press the FWD button or dial [640].
3. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No...

Call Forward 31
Call Forward - External (Off-Net)
Stations are allowed to forward intercom and transferred CO 
line calls to an off-net location. The Call Forward Off-Net feature 
allows a station to reroute calls that would normally be lost. 
Calls can be forwarded to home or another off-net site. Initially 
ringing CO calls cannot be forwarded with this feature.
To activate Off-Net Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Press the FWD button or dial [640] on the dial pad.
3....

32 Call Forward
To activate Follow Me Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial station number of the station from which forwarding is 
desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No Answer
5. Dial the three- or four-digit destination number where calls 
are to be forwarded. (Station, Voice Mail, ACD/UCD, or Hunt 
Groups.)
6. Replace the handset or...

Call Park 33
5. Dial the three- or four-digit destination number where calls 
are to be forwarded. (System Speed Bin, Station, Voice Mail, 
ACD/UCD, or Hunt Groups.) A confirmation tone sounds; 
five seconds later a dial tone is received.
To remove Follow-me Call Forwarding (off-site location):
1. Dial into the system on a DISA or TIE trunk. Enter the DISA 
access code, if applicable.
2. Dial the Follow-Me Forward code [642] on the dial pad.
3. Dial the station number of the station that forwarding is to...

34 Call Park
To retrieve a Parked Call:
Dial Personal Call Park location code [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button. A talk 
path will be established between the two parties.

SINGLE LINE TELEPHONE
While connected to first call:
1. Depress the hookswitch momentarily. An intercom dial 
tone will sound.
2. Dial [438]. The call is placed in personal park.
3. Dial desired number for second call.
4. Depress the hookswitch momentarily. An intercom dial 
tone will sound.
5....

Call Park 35

SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in 
Digital Telephone operation described above, except there is 
no TRANS button. The user must use 438 and hookflash 439 
feature codes.
Call Park - System
An outside line can be placed into one of eight parking 
locations and can be retrieved by any station that has a direct 
line appearance or an available Loop button. Parked calls have 
their own recall timer that recalls the originating station, and if 
still...