Vodavi Starplus Station User Guide

76 Personalized Messages
To cancel a pre-assigned message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.
Custom Messages
Each station can select from ten possible custom messages to 
display on the LCD of a key telephone calling that station. 
These messages are programmed from the first attendant 
station for system-wide use.
Each station can also program
 three unique custom messages.
To select a...

Personalized Messages 77
To use a unique custom message:
1. Dial [633] on the dial pad.
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial a valid message number (18-20) for the desired custom 
message.
To cancel a custom message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace handset. DND button LED extinguishes.

SINGLE LINE TELEPHONE
SLT users can use custom messages (21-30) as described 
above. Unique custom messages (18-20) are not...

78 Personalized Messages
[15] = At Home Until: HH:MM xm
[16] = On Break Until: HH:MM xm
[17] = At Lunch Until: HH:MM xm
3. Enter the date/time on the dial pad as shown:
Figure 3: Other Keypad Codes (Date and Time)
4. Press the HOLD button to enter message. A confirmation 
tone will sound and the DND button LED will flash.
To cancel the message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.

SINGLE...

Personalized Messages 79
Scrollable Canned Messages
The Scrollable Canned Message feature allows you to use a 
single digit [#] or [

] to scroll through the canned messages 
and select one. When the desired message is displayed, 
pressing the hold button places that message on the station 
LCD. This feature operates when the phone is in the idle mode 
only. This feature cannot be activated if the station is in the Call 
Forward or DND mode(s). This feature is not available to 
Attendant stations.
To...

80 Personalized Messages
To cancel the message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.

SINGLE LINE TELEPHONE
Not applicable
Personal Messages Flexible Button
You can program the code [633] onto a flexible button to 
speed access to select and use messages.
To program the Personal Messages Flexible Button:
1. Press the SPEED button twice.
2. Press the desired flexible button. The LED will...

PBX/Centrex Codes on a Flex Button 81
PBX/Centrex Codes on a Flex Button
For one-button access to Centrex or PBX features:
1. Program Centrex or PBX code into a Station or System 
Speed Dial bin, including hook-flash (FLASH key), [

], and 
[#] commands (refer to “Speed Dial” on page 87).
2. Program that speed bin onto a flexible button (refer to 
“Flexible Button Programming” on page 55).
Release Button
The Release Button feature allows the station user to speed up 
call handling time by disconnecting...

82 Redial
Redial a Saved Number
1. Press the SPEED button.
2. Press the [

] key. The saved number is automatically dialed.
Repeat Redial 
When you place a CO call and a Busy or No Answer is 
received:
1. Press the preprogrammed RPT REDIAL flexible button [643]. 
You wil receive an LCD prompt for a timer value.
2. Enter a valid number (006-999 seconds) for the Repeat 
Redial Timer. The default value is 060 (one minute). A 
confirmation tone will sound when you go  on-hook. The 
flexible button LED will...

Ring Down / Hot Line / Off-Hook Preference 83
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A 
confirmation tone will sound and the Auto Redial function 
is cancelled.

SINGLE LINE TELEPHONE
Not applicable
Ring Down / Hot Line / Off-Hook 
Preference
If your phone has been programmed for Off-Hook Preference, 
you can access an outside line, or a feature by going off-hook or 
pressing the ON/OFF button. It simulates the depression of a 
specific button and can be programed by a...

84 Ring Tone
2. Dial desired button number. Refer to the following chart:
To disable Off-Hook Preference:
1. Dial [691] on the dial pad.
2. Dial [00] on the dial pad.

SINGLE LINE TELEPHONES
When establishing an Off-hook Preference for SLT stations, it 
is necessary to program the SLTs CO line or line group, to 
access when going off-hook.
Single line telephones can bypass Off-hook Preference by 
doing a hookflash and then dialing their extension number.
Ring Tone
To select a distinctive ring tone for a...

Serial Number 85
The ringing choices are as follows:
3. When the desired tone is selected (default ringing code is 
set to 00), press the SPEED button to save it as the tone to 
present to callers. A confirmation tone will sound.
Serial Number
When feature code [609] is dialed on a display telephone, the 
serial number of the MPB displays. The serial number is used 
when you activate or upgrade the system.
CO RING TONE*/FREQUENCY
Tone (#) Freq Tone (#) Freq Tone (#) Freq
00 697/770 13 770/1633 26...