Vodavi Starplus Station User Guide

86 Software Identification
Software Identification
When a station dials feature code [610] on a display telephone, 
the system expects the next digits dialed to be a software 
identification code. This code is used to upgrade to a new 
version of software, e.g. upgrade from basic software to ACD 
software.
1. Dial feature code [610] on a display telephone.
2. Dial the software identification code.
Software Version
The current system software version can be viewed. The display 
shows the version number...

Sp eakerp hone 87
Speakerphone
1. Press the ON/OFF button to ON. (An intercom dial tone will 
sound.)
2. Press the DSS key of the desired party or press an available 
OUTSIDE LINE button and dial the number.
The speakerphone will be activated.
3. Press the ON/OFF button to end the call.
Speed Dial
A keyset user can associate up to 20 frequently dialed numbers 
as Station Speed Numbers (9000 to 9019). Telephone numbers 
can be up to 24 digits including pauses, flash commands, 
pulse-to-tone switchover,...

88 Speed Dial
4. Dial the desired telephone number and include these 
special codes:
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this 
inserts a non-display character causing numbers stored in 
the bin not to appear on the digital telephone’s display 
when bin is accessed.
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
To program multiple...

Station/Port Fixed Number 89
To store speed dial numbers:
1. Lift the handset.
2. Dial [661] on the dial pad.
3. Dial desired station speed number (9000-9019).
4. Dial the telephone number to store.
5. Briefly press and release the hookswitch. A confirmation 
tone will sound.
System Speed Dial Access
Stations can be individually allowed or denied the ability to use 
system speed dial (9020-9999) numbers. (System speed numbers 
9060-9099 are not monitored by toll restriction.) Stations cannot 
be...

90 Station Relocate
Station Relocate
The Station Relocation Feature allows you to dial a code 
followed by the old station number to bring all the station 
attributes including extension number, button mapping, speed 
dial, and class of service to the new location.
1. A station can be relocated by unplugging it, then plugging 
it into a new location.
2. Dial [636] on the dial pad. Then, dial the extension number 
of the station being relocated. Once this is done, all station 
attributes are copied to the...

Universal Day/Night Answer 91
While receiving a Camp On or OHVO call:
The called party may press a preprogrammed Text Message 
button with a specific message [633+XX].
For Example … [633] + [38] means a telephone calling the 
station receives the message WHO IS IT ?

SINGLE LINE TELEPHONE
Not applicable
Universal Day/Night Answer
Incoming CO lines can be programmed for Universal Day 
Answer (UDA) or Universal Night Answer (UNA). UDA/UNA 
assigned CO lines can also signal over the external page port(s)....

92 Voice Mail
When the system is in Day or Night mode and an outside 
line rings at another station, and you wish to answer it:
Dial [#5] on the dial pad. The connected outside line can be 
transferred or disconnected.
Voice Mail
Call Forwarding to Voice Mail Groups
Callers may be routed directly to your mailbox by forwarding 
your phone to a voice mail group.
1. Lift handset or press ON/OFF.
2. Press FWD or dial [640].
3. Dial the desired code:
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No...

Vo i c e  M a i l 9 3
Voice Mail Transfer with ID Digits
While on a call and the caller on the other end wishes to leave a 
Voice Message for another VM user:
1. At the initiating station, press the TRANS. button.
2. Dial the Voice Mail Group number or press the 
preprogrammed VM GROUP flexible button.
3. Dial the VMID (Mailbox location) of the desired party and 
go on-hook.
Vo i c e  M a i l b ox  B u t t o n
To program a Mailbox flexible button:
1. Press the SPEED button twice.
2. Press the desired...

94 Voice Mail
Voice Mail One-Touch Recording
The Voice Mail One-Touch Recording feature allows the station 
user, while on an internal/external call, to press a button and 
have the system record the conversation in the station user’s 
mailbox.
Dial feature code [649] + [ VVV ].
(where VVV = 440-447 for desired VM group) 
While on an internal or external call:
1. Press the preprogrammed VM RECORD button. The LED will 
flutter red during the setup and the following message will 
display:
2. Once the...

Vo l u m e  C o n t r o l 9 5
3. When you finish recording, press the preprogrammed VM 
RECORD button. The LED will extinguish and the normal 
LCD call information will display.

ELECTRONIC TELEPHONE
Not applicable

SINGLE LINE TELEPHONE
Not applicable
Vo l um e  Co n t ro l
DIGITAL AND ELECTRONIC TELEPHONES
The volume control on the Digital Key Telephone controls 
ringing, handset, and speakerphone volumes. It also affects the 
receive volume of the “Wanderer” cordless unit.
The volume on 8-button...