Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STARPLUS @ SPD 4696
CO LINE ATTRIBUTES PROGRAMMING
Digital Key Telephone SystemCO LINE 
AlTRIBUTES (Cont’d)
G. 
DISA Programming
Programming Steps
1.Press the DISA flexible button (Button #7).2. Enter a one-digit value on the dial pad to
indicate type of 
DISA desired.
- 0= No DISA (disable DISA)
- 1= 24-Hour DISA
- 2= Night DISA only
- 3= 24-Hour DISA with forwarding
- 4= Night DISA only with forwarding
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display will
now...

STARPLUS @ SPD 4896
Digital Key Telephone SystemCO LINE ATTRIBUTES PROGRAMMING
CO 
LINE ATTRIBUTES (Cont’d)
H. Flash Timer ProgrammingProgramming Steps
1.Press the FLASH TIMER flexible button (But-
ton 
#8).
2.Enter a two-digit timer value on the dial pad
between 01-20 which corresponds to 100
msec-2 seconds.3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
I.Line Group ProgrammingProgramming Steps
1. Press the CO LINE GROUP flexible button
(Button...

STARPLUS @ SPD 4896
CO LINE ATTRIBUTES PROGRAMMINGDigital Key Telephone System
CO LINE 
AlTRIBUTES (Cont’d)
J.Class of Service (COS) ProgrammingProgramming Steps
1.Press the LINE COS flexible button (Button
#lO).
2.Enter a one-digit value on the dial pad be-
tween l-5 which corresponds to five possible
class of service to which a line may be as-
signed:
- COSI = No restrictions.
- COS2= Table A governs, Station COS 2
and 4 are monitored.
- COS3= Table B governs, Station COS 3
and 4 are monitored.
- COS4=...

STARPLUS @ St’D 4896
Digital Key Telephone SystemCO LlNE AlTRlBUTES PROGRAMMING
CO LINE 
AlTRIBUTES (Cont’d)
K.CO Line Ringing AssignmentsProgramming Steps
Each CO line in the system may be assigned initial
incoming ringing to one of the following destinations:
l one or more stations 
(keyset or SLT)lto an ACD, UCD, Voice Mail or Hunt Group
* Off-Net (via speed dial)
1.Press the RING ASSIGNMENT flexible but-
ton (Button 
#1 1) to toggle to the Ringing As-
signment display. The display will show the...

STARPLUS @ SPD 4696
CO LINE ATTRIBUTES PROGRAMMING
CO LINE 
ATRIBUTES (Cont’d)
L.CO Line Identification DisplayProgramming Steps
Each CO line in the system can be programmed to
have a name associated to it in database program-
ming.
1.Press the CO LINE IDENTIFICATION flexible
button (Button 
#12). The following message
is shown on the display phone:
Digital Key Telephone SystemDescription
This feature allows a name to be entered into the
database programming for each individual line
(trunk) connected to...

STARPLUS @ SPD 4696
Digital Key Telephone SystemCO LINE ATTRIBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
M. Trunk Direction
Programming Steps
1. Press the TRUNK DIRECTION flexible but-
ton. (Button 
#13). The following message is
shown on the display phone:
2.Enter a one-digit value on the dial pad whichucorresponds to the desired trunk type:
- [0] = Out-of-Service (00s)
- [I] = Incoming only
- [2] = Outgoing only
- [3] = Both Incoming and Outgoing
3. Press the HOLD button to save the entry....

CO LINE ATTRIBUTES PROGRAMMINGSTARPLUS @ SPD 4896
Digital Key Telephone SystemCO 
LINE AlTRIBUTES (Cont’d)
620.2
DIAL PULSE PARAMETERS
Programming Steps
If this feature is to be assigned:
a. Press FLASH and dial 
[41]. The following mes-
sage is shown on the display phone:
b. The Dial Pulse features will toggle on and off
with each depression, and the display will up-
date with each depression.
l LED on = 
60/40 (RATIO), 1 Opps (SPEED)
* LED off = 66133 (RATIO), 2Opps (SPEED)
c. Press the HOLD button to...

STARPLUS @ SPD 4696
Digital Key Telephone SystemCO LINE ATWBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
620.3
FLEXIBLE PORT ASSIGNMENT FEA-
TURE
Programming Steps
If the CO Line numbers need to be relocated to
different ports:
a. Press FLASH and dial 
[42]. The following mes-
sage is shown on the display phone:
:  
““Oll~~~~06071
b. The buttons 1 through 4 indicate cards 
1through 4. When the relocation program is in-
itially entered, Button #l will be lit indicating thatthe user is programming the CO...

STARPLUS @ Si’D 4696dDigital Key Telephone SystemTABLE OF CONTENTS FOR SECTION 630
SECTION 630STATION AlTRIBUTES PROGRAMMING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .630-I
630.1INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .630-I
630.2
A.
8.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.Paging...

STARPLUS @ SPD 4696
Digital Key Telephone SystemSTATION 
AlTRIBUTES PROGRAMMING
SECTION 630
STATION ATTRIBUTES PROGRAMMING
630.1INTRODUCTION
Proqramming StepsDescription
If the system is in the programming mode, continue
using the program codes. 
If starting to program here,
enter the programming mode. Refer to 600.2,
Program Mode Entry (Key Station).
If station features are to be changed:
a. Press FLASH and dial 
[50]. The following mes-
sage is shown on the display phone:This section describes the...