Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STARPLUS @ St% 4696
SYSTEM PARAMETERS PROGRAMMING
Digital Key Telephone SystemMISC. SYSTEM PARAMETERS (Cont’d)
610.16
HUNT GROUPS
A. Hunt Group Programming
Programming Steps
If Hunt Groups are to be assigned:
1. Press FLASH and dial 
[30]. The following
message will be shown on the display:
2.The top left button in the flexible button field
will be lit for programming Hunt Group 1 (450).To change Hunt Groups or enter a different
Hunt Group, press the appropriate flexible
button 1-8 (450-457) and perform...

STARPLUS @ Si’D 4896
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Cont’d)
610.17LOCAL NUMBER/NAME TRANSLA-
TION TABLE
Programming Steps
If changes need to be made to Local Number/Name
Translation Table:
1. Press FLASH and dial 
[55]. The following
message is shown on the display phone:
Where:
- XXX= Table Number 300-499
- ###= Route Number 000-l 99
2. The ROUTE NUMBER LED is lit. Enter the
three-digit Route Number (000-l 99) from
what was entered in program code,...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 4696
Digital Key Telephone SystemMISC. SYSTEM PARAMETERS (Cont’d)
LOCAL NAME TRANSLATION (Cont’d)
Programming Steps
To program a phone number into the Local Num-
ber/Name Translation table:
1. Press the PHONE NUMBER flexible button
(Button 
#2) to enter the desired phone num-
ber into the translation table. Maximum lengthof phone number is 
lCdigits, including hy-
phens. Numbers entered must be in the for-
mat: 
1-602-XxX-xXxX.A 
=21
B=22C 
=23D 
=31E 
=32
F...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Cont’d)
LOCAL NAME TRANSLATION (Cont’d)
Programminq Steps ~
To program a name into the translation table:
1.Press the NAME flexible button (Button #3) toenter the desired name into the translation
table. Maximum length is 24-characters.
A 
=21
B=22
C =23D 
=31
E =32
F 
=33
G 
=41H 
=42
I 
A.3J 
$1:  
K=52~  
L=53
7-M ~61N 
=620 
=63P 
=71
cl =74
R =72s 
=73T 
=81
U 
=82
V =83w 
=91x 
=92
Y =93z 
=941...

STARPLUS @ SPD 496
Digital Key Telephone SystemTABLE OF CONTENTS FOR SECTION 620
SECTION 620
620.1
CO LINE AlTRIBUTES PROGRAMMING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .620-l
INTRODUCTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .620-l
A.
B.c.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
DTMF/Dial Pulse...

STARPLUS @ Sf’D 4896
Digital Key Telephone SystemCO LINE AlTRIBUTES PROGRAMMING
SECTION 620
CO LINE 
AlTRIBUTES PROGRAMMING
620.1INTRODUCTION
Programming Steps
If the system is in the programming mode, continue
using the program codes. 
If starting to program here,
enter the programming mode. Refer to Sec. 600.2,
Program Mode Entry (Key Station).
If any CO line features are to be changed:
a. Press FLASH and dial 
[40]. The following mes-
sage is shown on the display phone:
b. Enter a four-digit number...

CO LINE AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 4896
Digital Key Telephone System
CO LINE 
AlTRIBUTES (Cont’d)A. 
DTMF/Dial Pulse Programming
1.
2.Programming Steps
Press the 
DTMFIDIAL PULSE flexible button
(Button 
#l). This feature will toggle on and off
with each depression, and the display will
update with each depression.
l LED on = DTMF enabled
. LED off= Dial Pulse enabled
Press the HOLD button to save the entry.
Confirmation tone is heard.
B. 
CO/PBX Programming
Programming Steps
1.Press the...

STARPLUS @ SPD 4896Digital Key Telephone System
CO LINE 
AlTRIBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
C. UNA Programming
Programming Steps
1. Press the UNA flexible button (Button 
#3).This feature will toggle on and off with each
depression, and the display will update with
each depression.
l LED on = UNA is enabled
l LED off= UNA is disabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.Description
UNA. If a iine is marked UNA, and if the system is in
night service mode...

CO LINE AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 48%
Digital Key Telephone SystemCO LINE 
AlTRIBUTES (Cont’d)
E. Privacy
Programming Steps
If CO Line privacy is to be changed:
1. Press the PRIVACY flexible button. (Button
#5. This feature will toggle on and off with
each depression, and the display will update
with each depression.
l LED on = Privacy is enabled
l LED off = Privacy is disabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.Description
PRIVACY. If desired, the system...

STARPLUS @ SPD 4696
Digital Key Telephone System
CO LINE 
AlTRIBUTES (Cont’d)
F.Loop Supervision ProgrammingProgramming Steps
1.Press the LOOP SUPV flexible button (8utton
#6).
2.Enter a one-digit timer value on the dial pad
between 1 and 9 which corresponds to 
lOO-
900 msec.3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
1
CO LINE A-ITRIBUTES PROGRAMMINGDescription
LOOP SUPV. Loop supervision is used primarily
with 
DISA, Voice Mail/Auto Attendant...