Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

SYSTEM PARAMETERS PROGRAMMING
STARPLUS @ SPD 4999
Digital Key Telephone System
SYSTEM TIMERS (Cont’d)
A.System Hold Recall TimerProgramming Steps
If this timer is to be changed:
1.Press the SYSTEM HOLD RECALL TIMER
flexible button (Button 
#l). The following mes-
sage is shown on the display phone:
2.Enter a three-digit timer value on the dial pad
which corresponds to 001-300 seconds.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the displaywill
now update.
B.Exclusive Hold...

‘LUS @ SPD 4696
II Rey Telephone System
EM 
T’TRS (Cont’d)
attendant Recall TimerProgramming Steps
Description
timer is to be changed:
Press the 
A-TTENDANT RECALLTIMER flex-
ible button (Button 
#3). The following mes-
sage is shown on the display phone:This timer determines the amount of time a recalling
call will ring at the attendant station(s) before the
system will release the line.
When a CO Line recalls to the Attendant station and
is still unanswered, the system will release the line
at the...

STARPLUS @ SPD 4696
SYSTEM PARAMETERS PROGRAMMING
Digital Key Telephone SystemSYSTEM TIMERS (Cont’d)
E.Preset Fotward Timer
Programming Steps
If this timer is to be changed:
1.Press the PRESET FORWARD TIMER flex-
ible button (Button 
#5). The following mes-
sage is shown on the display phone:
2.Enter a two-digit timer value on the dial pad
which corresponds to 01-99 seconds.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the displaywill
now update.
i.Call Forward No/Answer...

STARPLUS @ SPD 4696
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)
G. Pause Timer
Programming Steps
If this timer is to be changed:
1.Press the PAUSE TIMER flexible button (But-ton 
#7). The following message is shown on
the display phone:Description
This timer determines the length of the pause when
programmed for use with speed dialing and LCR
Insert Tables.
Default: By default, the Pause Timer is set at 2
seconds and is variable from 1 to 9 seconds. There
7iiziyq...

SYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)I.Conference/DISA Timer
Programming Steps
If this timer is to be changed:
1.Press the CONFERENCUDISA TIMER flex-
ible button (Button 
#9). The following mes-
sage is shown on the display phone:
~  
CONFERENC,El$MER 00-99 1
2.Enter a two-digit timer value on the dial pad
which corresponds to 01-99 minutes.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
J.Paging Timeout TimerProgramming Steps
If this...

STARPLUS @ SPD 48%
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)
K.CO Ring Detect TimerProgramming Steps
If this timer is to be changed:
1.Press the CO RING DETECT TIMER flexible
button (Button 
#l 1). The following message
is shown on the display phone:Description
This timer controls the time necessary to detect an
outside line as ringing into the system.Default: By default, the CO Ring Detect Timer is setat 3 (300 msec), and is variable from 2 to 9
(200msec. to...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 4996
Digital Key Telephone SystemSYSTEM TIMERS (Cont’d)
M.Message Wait Reminder ToneProgramming Steps
If this feature is to be changed:
1. Press the MESSAGE WAIT REMINDER
TONE flexible button (Button 
#13). The fol-
lowing message is shown on the display
phone:
2.Enter a three-digit timer value on the dial pad
which corresponds to 000 to 104 minutes.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
N.SLT...

n
STARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM TIMERS (Cont’d)
0.SLT Hook Flash Debounce TimerProgramming Steps
If this timer is to be changed:
1. Press the SLT HOOK FLASH 
DEBOUNCETIMER flexible button (Button 
#15). The fol-
lowing message is shown on the display
phone:
2.Enter a three-digit timer value on the dial pad
which corresponds to O-l second in 10 
msec
increments.3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
System
Response...

SYSTEM PARAMETERS PROGRAMMING
STARPLUS CD si=D 4696
Digital Key Telephone System
SYSTEM TIMERS (Cont’d)
P.SMDR Call Qualification TimerProgramming Steps
If this timer is to be changed:
1.Press the SMDR CALL QUAL TIMER flexible
button (Button 
#16). The following message
is shown on the display phone:
2.Enter a two-digit timer value on the dial pad
which corresponds to 00-60 seconds in 1 sec.
increments.3. Press the HOLD button to save the entry.
Confirmation tone is heard and the displaywill
now update....

~ARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)
R.Reminder Ring TimerProgramming StepsDescription
If this timer is to be changed:
1. Press the REMINDER RING flexible button
(Button 
#18). The following message is
shown on the display phone:
2.Enter a two-digit timer value on the dial pad
which corresponds to 00-99 seconds in 
1 sec.
increments. A value of 00 disables the timer,
therefore the user will only receive one burst
of ring at the beginning of...