Home
>
Vodavi
>
Communications System
>
Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual
Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual
Here you can view all the pages of manual Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 191
STARPLUS @ st=D 4696 Digital Key Telephone SystemINSTALLATION a/ i/66Ml-50 STATION BLOCKS SLOT SLOTSLOT SLOTSLOTSLOTSLOT*1mSLOT#3.i4#Sx10Cl1%12 I/O MODULE 66Ml-50 CO LINE BLOCKS SLOTSLOTSLOTSLOT15#5#7118Figure 500-I Basic KSU Cabinet Mounting Arrangement Issue 1, March 1994 500-3
Page 192
INSTALLATIONSTARPLUS @ SPD 489fi Digital Key Telephone System /’ 3C-?\: / : ! ; : : i : !: z‘x-d, ji 0 r=e-’ G. ..--..-..._._.__.__....L.. --_, --Figure 500-2 Basic KSU Equipment Cabinet--__ _,500-4 Issue 1, March 1994
Page 193
STARPLUS @ SPD 4896 Digital Key Telephone SystemINSTALLATIONI rt-Figure 500-3 Basic KSU Cabinet Mounting Dimensions Issue 1, March 1994 500-5
Page 194
INSTALLATIONSTARPLUS @ SPD 4996 Digital Key Telephone Systemcabinet to locate the mounting holes. Also refer to Figure 500-3 Basic KSU Cabinet Mounting Dimensions. static RAM. cunstructfk techniques fur mounting-tooff* _ . _ ,concrete, plasterboard, or wooden surfaces. Proper tiounting is the resnonsibilitv of the 3.Drill the holes and mount the cabinet. C.Central Processor Unit (CPU) This plug-in card is one of two common equip- ment cards required to make the system opera-tional. The CPU card controls...
Page 195
STARPLUS @ SPD 4999 Digital Key Telephone SystemINSTALLATION -12v +12v+SVHW-tbl3at-YtiErHeartbeat-Slave Resetswitch RS-232C Input/Output Port (Future)Figure 500-4 Central Processor Unit (CPU) issue 1, March 1994 500-7
Page 196
STARPLUS @ SPD 4696 INSTALLATION Digital Key Telephone SystemPin #1 Pin #8CPU I/O 8 Pin Modular Jack Pinout KSUWE) Pin # 8 Pin Mad Jack 6Transmit Data 5Receive Data FITS (Request to Send) I CTS (Clear to Send)\ / 7DSR (Data Set Ready) GND 4 3DTR (Data Terminal Ready) DTR must be held high or data from the KSU will stop RS-232C PINOUT Data Communication Requirements are: A) Serial Port Compatible B) ASCII Code Compatible C) 8 Data Bits and 1 Stop Bit D) No ParityE) Flow Control Method: Xon/Xoff NOTE:...
Page 197
STARPLUS @ SPD 4896Digital Key Telephone System INSTALLATION KSUWE)Pin #IPin #8CPU I/O 8 Pin Modular Jack Pinout COMPUTER CONNECTION PW Pin # 8 Pin Mod Jack 6Transmit Data Pin #Pin #m-25DB-92 3Receive Data 32 CTS (Clear to Send) 47 RTS (Request to Send) 6 8GND 47 5RS-232C PINOUTData Communication Requirements are: A) Serial Port Compatible B) ASCII Code Compatible C) 8 Data Bits and 1 Stop Bit D) No Parity E) Flow Control Method: Xon/XoffNOTE: Arrows show flow control direction. Figure 500-e...
Page 198
INSTALLAnON STARPLUS @ SPD 4899Digital Key Telephone System D.Voice Control Board (VCB) The Voice Control Board (VCB) provides the time siot switch to control the digital switching information. The system tones are also gener- ated on this board. LEDs & Indicators: There are two LEDs on the board to indicate the +SV dc and - 5V dc. Modem Interface:The Voice Control Board (VCB) contains an “On-Board” modem that is capable of transmit- ting data at a rate of 1200 baud. The modem supports and is compatible...
Page 199
STARPLUS @ SPD 4996 Digital Key Telephone SystemINSTALLATION E.Key Telephone Board (KT12)This board provides the interface to twelve digi- tal telephones. This board can be plugged into any designated station slot. Refer to Figure 500-8 Key Telephone Board (KT12) for location of connectors. LEDs & Indicators: The board contains two LEDs to indicate the presence of +SJ dc and -5V dc. The LEDs are located on the top portion of the board. Line/Station Interfaces: The board has one mate 50-pin amphenol...
Page 200
INSTALLATIONSTARPLUS @ SPD 4896 Digital Key Telephone System +sv -5V )\ # dlin” // Figure 500-8 Key Teiephone Board (KTI 2)500-l 2 issue 1, March 1994