Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STARPLUS @ SPD 4996Digital Key Telephone System
INSTALLATION
STATIONCABLE
-A
I
\\ CABLE TIE
BOl7OM PLATE,
FEED CABLE BETWEEN
SQUARE KNOCKOUTS
AS SHOWN
EXPOSED BRAIDED
PORTION OF CABLES
IS TO BE GROUNDED
BY CABLE TIE AS
SHOWN
DETAIL A
Figure 500-9 Shielded Cable Terminationsissue 1, March 1994
500-l 3 

INSTALLATION
F.Single Line Board (SL12)The Single Line Telephone board (SL12) pro-
vides the interface for 12 
2500-type single line
telephones. This board can be plugged into any
designated station slot. It is recommended that
the Tri-Output Power Supply be used with this
card to provide the 
9OV ac and -48V dc volt-
ages.Only ons Ring Generator is required 
per system
One Tri-Output Power Supply will acconm~otfatetwo SL12 boards. When an SLl2 boiwd isinstelled, it 1s recommsnded tnaf the DTM4...

Digital Key Telephone SystemINSTALLATION
Table 500-2 Single Line Telephone Board
(SL12)j
2/27
2i
328I
I/3j4/29
Ij4
i
8/33
I
8/
9/34
/g/
10j35
I
10/
11j36
11j
12i37
!
12!
13j38/j
13COLOR
WH/BL
BL/WH
WH/OR
ORIWH
WH/GN
GN/WH
WH/BN
BN/WH
WH/SL
SUWH
RD/BLBURD
RD/OROWRD
RD/GN
GN/RD
RD/BN
BN/RD
RD/SL
SURD
BWBLBUBK
BWOR
OR/BK
BWGN
GN/BK1
14/39 I  BWBN
j14 j  
BN/BK
15
4o /  BWSL
/
15iSUBK
1641 YUBLI
16 
BVYL
1742;YUOR17 
OWYLI
1843:YUGN
18 i  GNNL
194 j  YUBN
19 BNNL
20/45 I  ;  YUSLI20 ~  
SVYL:
21I46 WBLI
:i...

INSTALLATIONSTARPLUS @ Si’D 4896
Digital Key Telephone System
G.CO Loop interface Board (C012)
This board interfaces 12 Loop start CO lines to
Table 500-3 CO Line Board (C012) Connections
the system. This board can be plugged into anydesignated trunk slot. Refer to Figure 500-l 1
CO Line Board (C012) for location of connec-
tors.
LEDs & Indicators:PAIR PIN
126
1
227
-23 j  28
/  3
4 1
29/  4
530
5
6
31
--L67 /  32
I  
78j  33
8
9 /  34
i 
910/  35
10
11/  36
/  11
12 i  37
:  12
13/  38
j  
1314 /  39
/...

STARPLUS @ SPD 4996Digital Key Telephone System
INSTALLATION
CO In Use
LED’sa
a
u=Cll-l
u
[I-=I3l-l-
U-
0
YCI
1u
u-- =I
- =
cl,I
m -
u-
- I
c3 -- I
D -
0:- I
a,
=4
In
i-l-= I
1
a::- z
I--=w
1I
i1
I
Figure 500-l 1 CO Line Board (CD1 2)Issue 1, 
Maich 1994
500-l 7 

INSTALLAllON
STARPLUS @ SPD 48%
Digital Key Telephone System
500.4APPLICATION MODULES
A.
4-Circuit DTMF Receiver Module (DTM4)This board provides four DTMF receivers for
SL12 boards. This board is connected onto
each SL12 board. Each SL12 board may 
con-tain 1 DTM4 board.
1
Wiring I Pkouts I connections:The board has a female molex connector at
each end that plugs onto metal pins located on
each SLT board.
Generally, one receiver will support 
DISA
and/or eight SLT stations under light to moder-ate...

STARPLUS @ Sf’D 4896
Digital Key Telephone SystemINSTALLATION
500.6Backplane l/O Expansion Module 
In-stallation
The Backplane 
I/O Expansion Module is a wall
mount unit with a 
36-pin input connector and four
RS-232C output connectors.
The Backplane 
I/O Expansion kit consists of one
connecting cable and the l/O Expansion Module.
1.Locate the Backplane I/O Expansion Module
in a location on the MDF backboard 
conven-ient to the KSU.
2.Locate the J24 connector on the backplane of
the KSU cabinet.
3.Locate...

INSTALLATlON
STARPLUS @ SPD 4896
Digital Key Telephone System500.7DIGITAL TERMINALS
A. Digital Terminals Installation:
The Digital Terminals are interfaced with the
Starplus SPD 4896 Key Station Board (KT12)
which has 12 circuits per board. Each 
12-circuitKey Station Board interface is extended from
the Basic KSU to the MDF through the front
edge connector on the key Station Board.
At the MDF are the terminated distribution ca-
bles that are run from each key telephone 
ioca-tion. Each Key Telephone...

STARPLUS @ SPD 4896Digital Key Telephone System
INSTALLATION
GREEN
RED
I
BLACK
rYELLOW
XMT TIP
XMT 
RING
RCVE TIPRCVE RING
Key Telephone WiringGREEN
XMT TIP
REDi i
!
BKYL @)!
DSSlDLS Console Wiring
GREEN
XMT TIP
RED 
XMT R’NG
Single Line Telephone WiringFigure 500-13 Digital Terminal Modular Block Wiring
Issue 1, March 1994
500-21 

INSTALLATlON
SARPLUS @ %‘I) 4896
Digital Key Telephone System
C.Wall Mounting the Executive TelephoneAll connections to the Digital Terminal are fully
modular. To wall mount the Digital Terminal, it is
necessary to use the Wall Mount bracket that comeswith each Digital Terminal and one standard-type
jack assembly designed for normal wall hanging
applications.a. Unplug the line cord from the phone. This line
cord will be re-used and should be retained.
b. Using a screw driver, remove the plastic num-
ber...