Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 4896
Digital Key Telephone System
610.2SYSTEM FEATURES PROGRAMMING
Programming Steps
If the system is in the programming mode, continue
using the program codes. If starting to program here,enter the programming mode. Refer to Sec. 600.2,
Program Mode Entry (Key Station)
If any System Features are to be changed:
1. Press FLASH and dial 
[05]. The following
message is shown on the display phone:Description
This section describes the procedures and steps
necessary...

STARPLUS @ SPD 4896
Digital Key Telephone System
SYSTEM FEATURES (Cont’d)
A. Attendant Override
Programming Steps
If this feature is to be changed:
1. Press the 
AlTN OVERRIDE flexible button
(Button 
#I). This feature will toggle on and off
with each depression, and the display will
update with each depression.
lLED off = Attendant Override is disabled
lLED on = Attendant Override is enabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.
B. Hold Preference
Programming Steps
If...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 48%
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
C. External Night Ring
Programming Steps
If this feature is to be changed:
1.Press the EXT NIGHT RING flexible button
(Button 
#3). This feature will toggle on and off
with each depression, and the display will
update with each depression.
l LED off = Ext. Night Ring is disabled
l LED on = Ext. Night Ring is enabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.
D.Executive...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
E.Page Warning ToneProgramming Steps
if this feature is to be changed:
1.Press the PAGE WARN TONE flexible button
(Button 
#5). This feature will toggle on and off
with each depression, and the display will
update with each depression.
l LED on = Page Warning Tone is enabled
l LED off = Page Warning Tone is disabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.
I=.Background Music Channel
Programming Steps...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 48s
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
G. LCR Enable
Programming StepsDescription
If this feature is to be assigned:
1.Press the LCR ENABLE flexible button (But-
ton 
#7). This feature will toggle on and off with
each depression, and the display will update
with each depression.
l LED on = LCR is enabled
l LED off = LCR is disabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.This feature is available with optional...

STARPLUS @ SPD 48%
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
I.Group Listening
Programming Steps
If Group Listening is to be assigned:
1.Press the GROUP LISTENING flexible button
(Button 
#9). This feature will toggle on and off
with each depression, and the display 
willupdate with each depression.
l LED on = Group Listening is enabled
l LED off = Group Listening is disabled
2. Press the HOLD button to save the entry.
Confirmation tone is heard.SYSTEM PARAMETERS PROGRAMMING
Description
All...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
K.Call Cost Display Feature
Programming Steps
If Call Cost Display Feature is to be enabled:
1.Press the CALL COST DISPLAY flexible but-
ton (Button 
#ll). This feature will toggle on
and off with each depression, and the display
will update with each depression.
l LED on = Call Cost Display is enabled
lLED off = Call Cost Display is disabled
2. Press the HOLD button to save the entry.
Confirmation tone...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
M. Handset Receiver Gain
Programming StepsDescription
If Handset Receiver Gain feature is to be enabled:
1.Press the HANDSET RECEIVER GAIN flex-
ible button (Button 
#13). This feature will tog-
gle on and off with each depression, and the
display will update with each depression.
l LED on
= Handset Receiver Gain is en-
abled
l LED off = Handset Receiver Gain is dis-
abled
2. Press the HOLD button to save the entry.
Confirmation...

SYSTEM PARAMETERS PROGRAMMINGSTARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM FEATURES (Cont’d)
N.Call Qualifier Tone OptionProgramming Steps
If the Call Qualifier Confirmation Tone is to be en-
abled:
1.Press the CALL QUALIFIER TONE OPTION
flexible button (Button 
#14). This feature will
toggle on and off with each depression, and
the display will update with each depression.
l LED on 
= Confirmation tone is enabled
l LED off = Confirmation tone is disabled
2. Press the HOLD button to save the...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
610.3ADDlTlONAL SYSTEM FEATURES
PROGRAMMINGProgramming Steps
If the system is in the programming mode, continue
using the program codes. 
If stating to program here,
enter the programming mode. Refer to Sec. 600.2,
Program Mode Entry (Key Station)
If any System Features are to be changed:Description
This section describes the procedures and steps
necessary to program System Features.
The buttons on the, digital terminal are...