Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STATlON AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 4896
Digital Key Telephone System
PAGE “B” STATION 
AnRIBUTES (Cont’d)
Station Identification (Cont’d)To program the Station ID for a SLT or OPX Station:
Programming Steps
1.Dial a [5] on the dial pad.
2. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
To program the Station ID for a SLT w/Message
Waiting Lamp:
Programming Steps
1.Dial a [6] on the dial pad.
2. Press the HOLD button to save the entry....

STARPLUS @ SPD 4696
Digital Key Telephone SystemSTATION ATTRIBUTES PROGRAMMING
PAGE 
“B” STATION ATTRIBUTES (Cont’d)
Station Identification (Cont’d)
To program the Station ID for a Relay/Sensor Mod-
ule:Proqramming Steps
1.Dial a [7] on the dial pad.
2. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
y,;Description
RELAY/SENSOR MODULE: The Relay Sensor 
In-terface Module connects to the system using one
digital station port and provides three relay...

STATION AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 48%
Digital Key Telephone SystemPAGE 
“B” STATION ATl%lBUTES (Cont’d)
6.Station Class of Service (COS)
Programming Steps
1.Press the CLASS OF SERVICE flexible but-
ton (Page B, Button 
#2).2. Enter a two-digit Class of Service entry as
follows:
0 1st digit is day COS
l 2nd digit is night COS
The six classes of service are:
- [l] = unrestricted
- [2] = governed by Table A
- [3] = governed by Table B
- [4] = governed by Tables A and B
- [5] = no O,l,‘,# as...

STARPLUS @ SPD 4896
Digital Key Telephone SystemPAGE “B” STATION 
A7TRlBUTES (Cont’d)
C. Speakerphone/Headset Programming
Programming StepsDescription
1. Press the SPEAKERPHONE flexible button
(Page B, Button 
#3).2. Enter a one-digit number on the dial pad
between 0 and 2 to identify the speakerphone
operation.
- [0] = works as normal speakerphone.
Full speakerphone capabilities on
both CO lines and Intercom.
- [I] = Speakerphone enabled for intercom
calls only. Speakerphone capabilities dis-
abled for...

STATlON AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 4896
Digital Key Telephone System
PAGE 
2” STATION A7TRlBUTES (Cont’d)
E.Paging Zone(s) ProgrammingProgramming Steps
1.Press the PAGING ZONES flexible button
(Page B, Button 
#5).
2.Enter a one-to-four digit number to program
paging zone(s).
- [0] = no zone (no pages received)
- [l] = Zone 1
- [2] = Zone 2
- [S] = Zone 3
- [4] = Zone 4._3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.Description
PAGING...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSTATION AlTRIBUTES PROGRAMMING
PAGE 
“B” STATION AlTRIBUTES (Cont’d)
F.Preset Call Forward ProgrammingProgramming Steps
1.Press the PRESET FORWARD flexible but-
ton (Page B, Button 
#6).
2.Enter a three-digit number to determine the
destination where calls are to be routed when
the preset forward timer expires.
Valid 3 diait destinations are:
[020-0991 = System Speed Bins 20-99 for
off-net forwarding
[100-l 95]= Station Numbers
[440-44.7 = Voice Mail...

STATlON ATTRIBUTES PROGRAMMING
PAGE “B” STATION ATTRIBUTES (Cont’d)
G.CO Line Group AccessProgramming Steps
1.Press the CO LINE GROUP ACCESS flexible
button (Page 
6, Button #7).2. Enter up to seven digits (0, or l-7) for the
outside line groups the station will have ac-
cess to.
- PI= no access
- [I] = access to Group 1, Code 9 or 81
- [2] = access to Group 2, Code 82
- [3] = access to Group 3, Code 83
- [4] = access to Group 4, Code 84
- [5] = access to Group 5, Code 85
- [6] = access to Group 6, Code...

STARPLUS @ SPD 4896
Digital Key Telephone SystemSTATION AlTRIBUTES PROGRAMMING
PAGE “B” STATION 
ATTRIBUTES (Cont’d)
I.Off-Hook Preference Programming
Programming Steps
To program a station for Off-Hook Preference;
1.Press the OFF-HOOK PREF flexible button
(Page B, Button 
#9). The following message
is shown on the display phone:
2.Enter the two-digit button number (01-46) or
(00) to indicate no specific button is preferred.
SLTs use 01 to enable or 00 to disable.
3.Then, enter either 0 or 1 where:
- [0]...

STATlON AlTRIBUTES PROGRAMMING
STARPLUS @ SPD 4996
Digital Key Telephone SystemPAGE 
“8” STATION ATIWBUTES (Cont’d)
J.Flexible Button Programming
Programming Steps
1. Press the 
BUTTON ASSIGN flexible button
(Page B, Button 
#lo). The following message
is shown on the display phone:
giiEigp
Description
BUlTON ASSIGN. Each 34button Digital terminal
has 28-flexible buttons which can be individually
programmed. Each 
ICbutton Digital terminal has
8-flexible ‘buttons which 
can, be individually pro-
grammed....

STARPLUS @ SPD 4896
Digital Key Telephone System
PAGE 
“6” STATION A7TRlBUTES (Cont’d)
Flexible Button Programming (Cont’d)Programming Steps
UNASSIGN: To unassign a button, enter:
BB [#] HOLDIf SLT stations are to be programmed for Off-Hook
Preference, it is necessary to program the desired
CO line, or CO line group, the SLT is to access whengoing off-hook.
To assign a CO Line for a SLT with Off-Hook Pref-
erence, enter:
00 
[l] LL HOLD (LL= CO Line 01-48)
To assign a CO tine group for an SLT with...