Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

UNIFORM CALL DISTRIBUTION (UCD)
STARPLUS * SPD 4696
Digital Key Telephone System
UNIFORM CALL 
DlSTRlBUTlON (Cont’d)
A.
-1-0 P
1.
2.
3.
Alternate UCD Group AssignmentProgramming Steps
lrogram an alternate group:
Press the ALTERNATE UCD GP flexible but-
ton (Button 
#9).Enter the three-digit pilot number (550 to 557)
of the desired alternate UCD group.
Press the HOLD button to save the entry.
Confirmation tone is heard and the display willDescription
ALTERNATE UCD GROUP. An alternate UCD
group can be...

STARPLUS @ SPD 4896Digital Key Telephone System
UNIFORM CALL DISTRIBUTION (Cont’d)
C. UCD Recorded Announcement
Assignment(s) (RAN)
Programming Steps
To program a Recorded Announcement:
1.Press the ANNOUNCEMENT TBLS flexible
button (Button 
#l 1).
2.Enter a two-digit sequence:
- 1st Digit = RAN port specified for primary
message.
- 2nd Digit = RAN port specified for secon-
dary message.
Example:lan 
entry of 1,2 = Port 1 will answer the call,
Port 2 will provide a secondary message.
0an enty.of 81 = Port...

STARPLUS @ SPD 4696
UNIFORM CALL 
DlSTRlBUTlON (UCD)
UNIFORM CALL 
DlSTRlBUTlON (Cont’d)
D.UCD Station Assignment(s)
Programming Steps
Digital Key Telephone SystemDescription
To program stations into a UCD group:
1.Press the Page “B” flexible button (Page A,
Button 
#I 9). The following message is shown
on the display phone.
UCD STATION ASSIGNMENTS. Any type of station(excluding 
DSS/DLS Consoles) may be entered as
valid UCD stations. Calls will be routed to station in
the order they are entered for the...

STARPLUS @ SPD 4896
Digital Key Telephone SystemUNIFORM CALL DlSTRlBUTlON (UCD)UNIFORM CALL DISTRIBUTION 
(Co&d)660.2UCD 
TlMERSProgramming Steps
If UCD timers are to be changed:
a. Press FLASH and dial 
[61]. The following mes-
sage is shown on the display phone:Description
,Six timers for UCD operation are programmable on
a system-wide basis. The UCD timers include: A
Ring Timer, Message Interval Timer, an Overflow
Timer, a Auto Wrap-Up Timer, a No/Answer Recall
Timer, and a No/Answer Retry Timer. Each...

UNIFORM CALL DISTRIBUTION (UCD)STARPLUS @ SPD 4996
Digital Key Telephone SystemUNIFORM CALL 
DlSTRlBlJTlON (Cont’d)
UCD 
TlMERS (Cont’d)
B.UCD Message Interval Timer
Programming Steps
To make a change to the UCD Message Interval
Timer:
1.Press the MIT TIMER flexible button (Button
#2). The following message is shown on the
display phone:
2.Enter the three-digit timer value on the dial
pad which corresponds to 
000600 seconds.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the...

STARPLUS @ SPD 4696Digital Key Telephone System
UNIFORM CALL 
DlSTRlBUTlON (Cont’d)
UCD TIMERS (Cont’d)
D.UCD Auto Wrap-Up Timer
Programming Steps
To make a change to the UCD Auto Wrap-up Timer:
1.Press the AUTO-WRAP TIMER flexible but-
ton (Button 
#4). The following message is
shown on the display phone:
2. Enter the three-digit value on the dial pad
which corresponds to 000-999 seconds.
3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
E.UCD...

UNIFORM CALL DlSTRlBUTlON (UCD)
STARPLUS * SPD 4896
Digital Key Telephone SystemUNIFORM CALL 
DlSTRlBUTlON (Cont’d)
UCD TIMERS (Cont’d)
F.UCD No-Answer Retry Timer
Programming Steps
To make a change to the UCD No-Answer Retry
Timer:
1.Press the NO-ANSWER RETRY TIMER flex-
ible button (Button 
#6). The following mes-
sage is shown on the display phone:
2. Enter the three-digit value on the dial pad
which corresponds to 000-999 seconds.
3. Press the HOLD button to save the entry.
Confirmation tone is heard...

STARPLUS @ SPD 4896Digital Key Telephone SystemUNIFORM CALL DISTRIBUTION 
(UCDIUNIFORM CALL DISTRIBUTION (Cont’d)
650.3
UCD RAN ANNOUNCEMENT TABLES
Programming Steps
If Recorded Announcement devices are installed to
operate with UCD, these tables must be pro-
grammed:
a. Press FLASH and dial 
[62]. The following mes-
sage is shown on the display phone:
b. The top left button in the flexible button field will
be lit for programming UCD RAN An-
nouncement Table 
1, To change to UCD RAN
Announcement Table...

STARPLUS @ SPD 4896
Digital Key Telephone SystemTABLE OF CONTENTS FOR SECTION 655
SECTiON 655VOICE MAIL GROUPS O/M). . ..~................................................................655-I
655.1655.2
655.3VOICEMAILPROGRAMMING......................................................................655-l
A.AlternateVoiceMailGroup............................................................655-2
5.“Leave”MailIndexEntry:................................................................655-2...

STARPLUS @ SPD 4996
Digital Key Telephone SystemVOICE MAIL GROUPS 
(VM)SECTION 655
VOICE MAIL GROUPS (VM)
655.1VOICE MAIL PROGRAMMINGProgramming Steps
If the system is in the programming mode, continue
using the program codes. If starting to program here,
enter the programming mode. Refer to Sec. 600.2,
Program Mode Entry (Key Station).
If Voice Mail Groups are to be programmed:
1. Press FLASH and dial 
[65]. The following
message is shown on the display phone.
Where:
- G = Voice Mail group number (O-7)...