Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STARPLUS @ SPo 48%
Digital Key Telephone SystemINlTlAUZE DATABASE PARAMmRS
INIT. DATABASE PARAMETERS (Cont’d)
D.Initialize Station and CO Port ParametersProgramming Steps
If Group Parameters need to be initialized:
1. Press the Station/CO Port Parameters 
flex-ible button (Button 
#4). The following mes-sage will be shown on the display phone:Description
Station and CO Port parameters may be initialized
setting all stations and al! CO Lines back to their
original, default values. The following data...

INITIALIZE DATABASE PARAMETERSINIT. DATABASE PARAMETERS (Cont’d)
E.Initialize Exception TablesProgramming Steps
If Exception Tables need to be initialized:
1. Press the Exception Tables flexible button
(Button 
#5). The following message will be
shown on the display phone:
STARPLUS @ SPD 4896
Digital Key Telephone SystemDescription
The Exception Table parameters including the Al-
low/Deny Tables and the Special Tables may be
initialized setting all tables to their original, default
values. The following...

STARPLUS @ SPD 4896
Digital Key Telephone SystemINITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
F.Initialize System Speed NumbersProgramming Steps
If System Speed bins need to be initialized:
1.Press the System Speed flexible button (But-ton 
#6). The following message will be shown
on the display phone:Description
Numbers entered into the System Speed dial Table
may be initialized clearing all bins to their original,
default value (empty). All bins 20 through 99 are
cleared returning...

INlTlALIZE DATABASE PARAMETERS
STARPLUS @ SPD 4696
Digital Key Telephone System
INlT. DATABASE PARAMETERS (Cont’d)
G. Initialize LCR Tables
Programming Steps
If LCR Tables need to be initialized:
1.Press the LCR* Tables flexible button (Button
#7). The following message will be shown on
the display phone:
PRESS HOLD:
2.To initialize the LCR* Tables, press the HOLD
button. Confirmation tone will be heard.Description
This feature is available with optional software.The 
LCR* Tables may be initialized...

STARPLUS @ SPD 4696
Digital Key Telephone System
I’-:. DATABASE PARAMETERS (Cont’d)INITIALIZE DATABASE 
PARAME’IERS
l-l.Initialize System Database and Reset (all
parameters)Programming Steps
DescriptionIf System needs to be initialized:
To completely initialize the database area including
1.Press the System and Reset flexible buttonall non-programmable parameters held in Static
(Button 
#8). The following message will beRAM (SRAM) and reset the system also clearing anyshown on the display phone:meantime...

INlTlALlZE DATABASE PARAMETERS
STARPLUS @ SPD 4696
Digital Key Telephone System
INlT. DATABASE PARAMETERS (Cont’d)
I.initialize ICLID ParametersProgramming Steps
If the 
ICLID* Table(s) need to be initialized:
1.Press the lCLlD* TABLE flexible button (But-
ton 
#9). The following message will be shown
on the display phone:
Description,‘
This feature is available with optional software.The 
ICLlD* Tables parameters may be initialized
setting all data fields to their original, default values.
2. To...

STARPLUS @ SPD 4696
Digital Key Telephone SystemINlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
J.Initialize Directory Dialing Table
ParametersProgramming Steps
If Directory Dialing Table Parameters need to be
initialized:
1.Press the Directory Dialing Table Parameters
flexible button (Button 
#IO). The following
message will be shown on the display phone:Description
The Directory Dialing Table parameters may be
initialized setting all data fields to their original, 
de-fault values.
2....

STARPLUS @ SPD 4696
Digital Key Telephone SystemlNlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS 
(Co&d)
K.Initialize Hunt Group ParametersProgramming Steps
If Group Parameters need to be initialized:
1. Press the Hunt Group Parameters flexible
button (Button 
#l 1). The following message
will be shown on the display phone:Description
Hunt Group parameters may be initialized setting all
data fields to their original, default values.
2. To initialize the Hunt Group parameters,
press the HOLD...

STARPLUS @ SPD 4696
Digital Key Telephone System
INlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
L.Initialize ACD or UCD Group ParametersProgramming Steps
If 
ACD’ or UCD Group Parameters need to be
initialized:
1.Press the ACD* or UCD Group Parameters
flexible button (Button 
#12). The following
message will be shown on the display phone:Description
This feature is available with optional software.
ACD’ or UCD Group parameters may be initialized
setting 
all data fields to their...

INlTlALlZE DATABASE PARAMETERS
STARPLUS @ SPD 4896
Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
M.Initialize VM Group ParametersProgramming Steps
If VM* Group Parameters need to be initialized:
I.Press the VM* Group Parameters flexible 
but-ton (Button 
#13). The following message will
be shown on the display phone:Description
This feature is available with optional software.VM* Group parameters may be initialized setting all
data fields to their original, default values.
:PRESSHOLD...