Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

STARPLUS @ SPD 4896LEAST COST 
ROUTlNG (LCR) PROGRAMMINGDigital Key Telephone SystemLCR PROGRAMMING (Cont’d)
665.2
LCR TABLES PROGRAMMING
Programming Steps
If the system is in the programming mode, continue
using the program codes. If starting to program here,enter the programming mode. Refer to Sec. 600.2,
Program Mode Entry (Key Station).
To program the system for Least Cost Routing:
1. Press FLASH and dial 
[75]. The following
message is shown on the display phone:
2. There are eight tables which can...

STARPLUS * SPD 4896
Digital Key Telephone SystemLEAST COST ROUTING (LCR) PROGRAMMING
LCR PROGRAMMING (Cont’d)
A.
3-Digit Area/Office Code TableProgramming Steps
1.Press 3-DIGIT TABLE flexible button (Button
# 1). The following message will be shown on
the display phone:
Where:
-L = [0] for non leading 1 (,,I ” not dialed)
[1] for leading 
I(“1 ” is dialed)
- NNN = area/office code
-RR = route list number 00-l 5
- Y = [0] do not go to 6-Digit table
[1] go to 6-Digit table
-PP = number of digits expected...

STARPLUS @ SPD 4696
LEAST COST 
ROUTlNG (LCR) PROGRAMMINGDigital Key Telephone System
LCR PROGRAMMING (Cont’d)
B.6-Digit Off ice Code TableProgramming Steps
1.Press the 6-DIGITTABLE flexible button (But-ton # 2). The following message is shown on
the display phone:
Where:
- S = [0] to remove codes
[l] to add codes
- AAA = area code
-RR = route number 00-l 5
- NNN = office code
2. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update.
3. Enter additional office...

WARPLUS @ SPD 4896
Digital Key Telephone SystemLEAST COST ROUTlNG (LCR) PROGRAMMING
LCR PROGRAMMING (Cont’d)
C.Exception Code TableProgramming Steps
1. Press EXCEPTION TABLES flexible button
(Button 
#3). The following message will be
shown on the display phone:
DescriptionException Table. This table is used for operator
calls and any other calls which would use a one-digit
or two-digit entry, rather than a three-digit area code.
Where:
- S = [0] to remove code from table,
[l] to add code to table
-XX=...

LEAST COST ROUTING (LCR) PROGRAMMINGSTARPLUS @ SPD 4696
Digital Key Telephone SystemLCR PROGRAMMING (Cont’d)
D.Route List Table
Programming Steps
1.Press the ROUTE LISTTABLE flexible button
(Button 
#4). The following message will be
shown on the display phone:
Where:
-RR = Route List Table number 00-l 5
- T = Time Period Route list 1-4
- G = CO Line Group l-7
- DD = Insert/Delete Table reference 00-19
(## for none)
- L= LCR Class of Service (LCOS)
2. Press the HOLD button to save the entry.
Confirmation...

STARPLUS @ SPD 4896
Digital Key Telephone SystemLEAST COST ROUTlNG (LCR) PROGRAMMING
LCR PROGRAMMING (Cont’d)
Route List Table (Cont’d)Programming StepsDescription
LCR COS 
Pkority. A station should be assigned a
class of service for LCR. Referto Sec. 630.1, StationAttributes Programming, LCR Class of service
(COS). The LCR COS can be between 0 and 6, with
0 being unrestricted and 6 being the most restrictive.Within the time period route 
List,Table, line groups
are given an LCR COS Priority assignment...

STARPLUS@ SPD 4696LEAST COST ROUTING (LCR) PROGRAMMING
Digital Key Telephone SystemLCR PROGRAMMING 
(Cont’d)E. Insert/Delete Table
Programming Steps
1.Press INSERT/DELETE TABLE flexible but-
ton (button 
#5). The following message will be
shown on the display phone:
Enter the table information as follows;
Where:
- lT = Insert/Delete Table Number 00-l 9
- X = [0] Pre-Delete numbers (first digits di-
aled in the number),
[l] Pre-Insert numbers (insert digits in front
of number dialed,
[2] Post-Insert...

TARPLUS @ SPD 4896
iqital Key Telephone System
2RDGRAMMING (Cont’d)
Daily Start Time TableProgramming Steps
Description
1.Press the DAILY START flexible button (but-
ton 
#6). The following message will be shown
on the display phone:
2.Enter times in military form (2400 Hours) in
succession.3. Press the HOLD button to save the entry.
Confirmation tone is heard and the display willnow update. Default times are 0800, 1700,
2300 (8 AM, 5 PM, and 11 PM), and the fourth
time is disabled (####). To change a...

STARPLUS* SPD4896
LEAST COST ROUTING (LCR) PROGRAMMING
Digital Key Telephone SystemLCR PROGRAMMING 
(Cont’d)
G.Weekly Schedule TableProgramming Steps
1. Press the WEEKLY SCHED flexible button
(button 
#7). The following message will be
shown on the display phone:
Where: 
D= Day of the Week
- [0] = Monday
-[ 1 ] = Tuesday
- [2] = Wednesday
- [3] = Thursday
- [4] = Friday
- [5] = Saturday
- [6] = Sunday
T = Time Period Route List (l-4) to use for the time
of day (based on the daily start time table)....

STARPLUS @ SPD 4896
Digital Key Telephone System
L54ST COST ROUTING (LCR) PROGRAMMING
1PROGRAMMING (Cont’d)
l-l.LCR Routing for Toll InformationProgramming Steps
1.Press TOLL INFO flexible button (button #8)The following message will be shown on the
display phone:
2.Enter the two-digit Route List number (00-I 5)
for the Route to be referenced in the Route
List Table.
3. Press the HOLD button after programming
the Route number. Confirmation tone is heard
and the display will now update.
4.Enable LCR at...