Toshiba Voice Processing Vp100 Installation And Maintenance Manual

QuiGk Reference Guide 
.*- 
Mhtenance 
Section Subject Command 
Information 
Diagnostics 
(ccentinued) Port status PS 
Displays current state of the ports. 
Ah-m Test TEA 
Attempts-to call number defined for alarm call. 
System Forwarding TEClxy 
_. - Forwards all ports specified_ Uses string from System 
Parameter 45 - SYSTEM RELOAD FORWARD 
STRING. 
x = port number or first port in a range of ports 
(optional); 
y = port number of the last port in a range of ports 
(optional). 
., 
Initialization...

_ Quick Reference Guide . -. 
l *- 
Maintenance 
Section Subject Command Information 
Integration 
- _ 
Incoming Call 
Records 
Message Waiting 
Lamps 
Message Waiting 
Lamps 
Message Waiting 
Lamps 
Traffic Pegs Traffic Peg Count 
Table 
-. . 
Message Automatic Purge 
Purge 
.- 
. . 
_ 
Cancel Purge 
Baud Rate hiON 
MWL RELITF 
Mtti RFCALC 
MWOFF x 
LP 
CP 
APURGE x y’ z 
CPURGE 
BAUD Used to monitor incoming call records over the 
RS-232C link (TERM 2). To exit the monitor mode, 
press lEscapel 
....

Quick Reference Guide ..- 
hliaintenance 
Section Subject Command Information 
Message 
Purge 
(continued) Allowable 
commands 
HELP 
System 
configuration IN 
Internal Modem 
lMOD DISABLE 
MOD ENABLE 
Miscellaneous Password 
. 
Restart 
._ . . - Time 
Update 
PASS x y 
RESTA 
- 
TIME 
UP Displays the allowable commands for the password 
level of operation currently logged in to. 
Command to enter the system configuration program 
INSTALL. This pro,oram consists of a series of 
questions that define the...

MAINTENALCE 6-l 
3 
6.1 
_I PREVENTIVE MAINTENANCE 
.c Preventive maintenance consists of a period& visual inspection of the connections, and of listing I 
,- 
the System-Performance tables. The frequency of this maintenance depends on the operating 
environment provided for the VP 100. Based upon the environment, the local service comF,tny 
should determine the maintenance interval required. 
Inspect all connections on the cabinet to make sure they are well seated and secure. Wires and 
cables should be...

6-2 lnstallafion a-1: Maintenance Manual ’ 
6.2 COMMAND SUMMARY 
_- 
,- The overall command structure for ,VP 1 OQ maintenance commands is-different from the 1.erb-noun 
protocol--used in the UPDATE Program. The following tables illustrate the format for each 
command with 
BOLD letters indicating the minimum input. In some instances, a modifier and 
extension may be required to complete the command string. 
l *- 
The VP 
100 indicates it is ready to receive information by displaying the @ promp_t. All...

MAINTENAhCE 6-3 
LR 
- _ 
LT LIST TRACE 
.‘, - 
-I 
-. 
‘Y 
> 
. 
Command 
L PDL 
Basic Definition 
LIST PERSON.\L DISTRIBUTION LIST 
Lists the numbsr of Personal Distribution List (PDL) sectors Turrsntly 
_ 
used throughout the system. 
LPOX LIST PORT 
Lisrs the current configuration status for the PORT number sFcified. 
x=port number 
LIST REPORT 
l 
Prints a menu for types of report to select which contains the 
following entries. 
1 = System Performance 
2 = Network Traffic 
3 = User Message...

6-4 Installation ani Maintenance Manual 
_ 
Command Basic Definition 
CR CLEAR REPORT 
Gives a menu for the type of report to cle_ar. 
.- 
n Tests 
_ . 
. . 
1. System Performance, Traffic Pegs, and Port Statistics. 
2. Network Traffic. 
3. User Message, User Calling 
, and Mailbox Us&e. When cleared, 
the User Status Detail report is also cleared. 
. 
The following commands test the alarm callout, forwarding strin 
g, initializing string, hard disk, 
line card, network location, and system status. From...

MAINTENANCE 6-5 
n 
- _ 
BAUD 
. CPURGE 
HELP Displays the allowable commands for the pa&word level of operation 
currently logged in to. 
IN INSTALL 
At the @ (prompt), enter IN to access the System Configuration 
Installation program (INSTALL). This program consists of a series of 
questions that define the VP 100 database. Answers to questions may 
be derived from a list, a default value, or created by the installer. 
Command Basic Definition 
TENET (NET 
LOC) 
TES 
DEX (REGION) TEST NETWORK (NETWORK...

6-6 /nsfa//ation and Maintenance Manual 
Command Basic Definition 
f‘ ‘. 
\IOD ENABLE MODE>1 ENABLE 
Restor?s.access to the VP 100 via the internal modem. 
\ION2 tMONITOR TERMINAL #Z 
?lWL RECALC 
I\lWL RELITE 
- _ 
XlWOFF x 
PASS (LEVEL) 
(NEW 
P.ISSWORD) 
Used in conjunction uith Centrex SMDI Integration to display. 
incoming call records over the RS-232C link. 
m To EXIT the monitor mode, press 1-1. 
,._ 
Used in certain integrations where the PBX lights lamps via a 
computer, when the computer has...

MAINTENk‘aCE 
6-7 
Command Basic Definition 
PRT X 
PS 
- _ 
RRSTA 
_. r REST0 RESTORE 
TIME 
UP 
-. 
To set or change the password. at the @ (prompt) enter the i,llowing 
commands follo\vsd by the password. 
PASS.A (for administrative) 
PASS M (for maintenance) 
PASS R (for report) 
PORT X 
l *- 
Monitors and.prints the tone and DTMF ex-ents received for -he 
channel specified. 
w To Exit the monitor mode. press [Escape]. 
PORT STATUS 
Prints the status of all ports. 
RESTART 
Restarts the CPU. All...