Toshiba Voice Processing Vp100 Installation And Maintenance Manual

6-8 Installatm: and Mamenance Manual 
_ 
6.3 DIAGNOSTICS 
.- The VP 100 performs selftesting, diaggostic programs which run contiIESSAGE WAITING IS/-TURNED ON (OFFSITEj/-TURNED OFF/SUSPENDED 
or MESSAGE WAITING IS OFF IN THE INFORMATION TABLE 
or MESSAGE WAITING IS NOT WITHIN THE USER SPECIFIED TIME PERIOD TO CALL 
or A CALL REMINDER HAS BEEN LEFT ON THIS DISPLAY PHONE 
OFFSITE OR PAGER# 99875432 
GREETING IS/TURNED ON/TURNED OFF/ON BY AUTO ACTIVATION 
THIS MAILBOX HAS A SECURITY CODE/NO SECURITY CODE ON...

MAINTENANCE 
6-9 
h Release 6.1 and later 
. ..1 @L M 350 INFORMATION TABLE NUMBER: 25 CLASS OF SERVICE: 1 
.- 
.- WITH ATTRIBUTES 8 10 13 24 
. 
EXTENSION NUMBER:..350 
MESSP;GE WAITING IS/ON (OFFSITE)/OFF/SUSPEKDED 
or MESSAGE WAITING IS OFF IN THE INFORMATIOIN TABLE 
or MESSAGE WAITING IS NOT WITHIN THE USER SPECIFIED TI,ME PERIOD TO CALL ’ 
or A CALL REMINDER HAS BEEN LEFT ON THIS DISPLAY PHOlUE 
OFFSITE OR PAGER# 99875432 
GREETING IS/ON/OFF/ON BY AUTO ACTIVATION 
.‘- 
THIS MAILBOX HAS A SECURITY...

6-10 Installa;,_n and Mainrename Manual 
n 
.- 
.- Message Status 
The list header command displays information about a message. Enier the command 
LIST HEADER XXXX (or L HE XxXx’) )I 
\vhere XXXX is the message number. 
The following example shows all items that can be displayed. 
@LHE3 
.  CREATOR MAILBOX h7JMBER: NONE 
EXTENSION MESSAGE NUMBER: 0000 
TIME 08/03/89 IO: 
11 USE COUNT: 00002 
ORIGINAL MESSAGE TYPE: 9 
DEPTH OF FORWARDING: 0 
FIRST EXTENSION BLOCK: 0004 
hTUMBER OF FULL EXTENSION BLOCKS:...

MAINTENANCE 
6-l 1 
LIST NETklAILBOX XXXX (or L FET XXXX) 
- _ 
The ioliowing example sho	 Y, the information displayed 
. 
@L 
SET 610 
LOCATIOK FRAME NUMBER: 0005 
DELAY: 00000 
MIN. 
ERRORS: 00000 
LI\lIT: 00010 
lIESSAGE 8 
OOOE 
0010 
0012 
Port Configuration Status 
-_. 
. 
The current configuration status for a port can be listed at the @ prompr by entering the 
command: 
LIST PORT X (L PO X ) )] 
where X represents the port number. When a port is configured to use different 
INFORMATION Tables,...

6-12 installation and Maintenance Manual 
- _ 
DEX tests each of the specified regions separately, starrin 
g with the lowest-numbered reiion 
through the highest-numbered region. When DEX finishes testins a region. it displays a status 
line: 
REGION WW COMPLETE DISK #I: XXXXX DISK $2: YYYYY MISMATCHES:ZZZZZ 
. 
ww = Region that has just completed testing 
xxxxx = Number of sectors on the disk had read error 
l *- 
YYYYY. 
= Does not apply fo VP 100 
zzzzz = Does not apply to VP 100 
The form of the...

MAINTENAh,: 6-13 
n Tone/DTMF/Beep Test 
To run the test. turn on the terminal or teleprinter. At the @ prompt enter: . 
_- 
TEST LINE 1 (or TE L 1) m . 
.- 
This test runs in sequence on each of the instalIed ports. It uses the hybrid transformer on the 
LIC to check tone generation and detection circuitry. 
A tone is applied to the hybrid transformer and, as it is being reflected, the tone detectc?r is 
turned on. A comparison is made to see if the tones match the tones detecf’cd. The test _

6-14 Installation and Maintenance Manual 
- _ 
. 
Table 6-1 Abbreviations for Channel/Port State 
Port State Description _ 
. 
ADR .. COLLECT ADDRESS’FOR A MESSAGE 
AFC AUTO COPY CONFIGURATION 
XFZ PLAY ALL PHRASES 
XIC (ASSISTED INWARD CALLING) CALLING A USER OR PLAYING A GREETING 
,ILM ALARhI-CALL-OUT . 
.IPR PLAY ALL PROMPTS 
CHK CHECK FEATURE 
CON CONFIGURATION, MSG WAITING PARAMETERS OR SECURITY 
DRP DROPPING CALL 
EXT EXIT 
F-UT FUTURE DELIVERY LISTEN 
FORWARDED TO DIGITS IN SYSTEM PARAMETER TABLE...

MAINTENANCE 
6-15 
n Alarm Test 
To test the alarm call-out feature. at the @ prl-‘“pt. enter: 
TEST ALARM (or TE A) L-1 
. 
The test attempts to call the strin, 0 entered durrcg I*KST,\LL. If successful, the person 
answering the alarm call hears the folloxving: 
l *- 
-Beep-Beep-Beep-Beep. This is an alarm call .from x.oice system number 123. Errortype X has 
occurred. Press star to ackno
.ledge alarm no$carion or press pound to connect to the 
modem.” 
If not acknowledged, the call disconnects after 1...

6-16 Installation and Maintenance Manual 
@!TE .-‘I 
System calls string entsred in System Parameter 3 1 
’ “Beep, beep, beep. This is an chm from 
Voice SJsrem number 123. Error Type 0 has 
occurred. Press stnr 
to conjinn or press pound 
for modem access. ” 
DISCONPXCT . 
Call disconnects ah one minute. 
System retries call every 10 
minutes, until acknowledged. 
Goodbye 
. 
1 
Line “beeps” for up 
to three minutes 
@LH 
FRI \lXl/DD HH:MM:SS YYYY SYSTEM NtilE ID:XXX SiX3X-i F’BXXXX 
CLE.kRED: \IM/DD...

MAINTENANCE 
3-17 
q System Forwarding 
The forwarding string entered in System Parameter 4.5 - SYSTEM-RELOAD FORWARD 
STRING. is automatically dialed if.the VP 100 reloads for any reason. During this time, calls 
are not accepted for several minutes while ?n automatic check is performed on the database. If 
forwarding strings are not set up_ incbmin 
g calls receive a ring-no-answer condition until the 
VP 100 is ready. When forwardin 
g strings are set up correctly, the PBX forwards all incoming 
calls...