Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual

NAMES T&de 15-3-15.3
HOW TO CONFIGURE THE NAMES TABLE
NAMES Table entries consist of three items of data - the mailbox number, the last name and the
first name of the ma&ox holder, entered as follows:
LMILBOX NUMBER,LAST NAME.FIRST NMfE.*-
03’‘Ihe mailbox must e&t in the USER Table before it can be entered in the NW Table.
A maximum of 18 characters is allowed for the total of last and first names
R3The name spoken in the Names Directory is the name recorded for the mailbox, not the
name entered in the...

15-4 corviglJrationMrnua/-ADD
MODIN
DELETE
IIT’The NAMES Table is l&led in random order, not
alphabetically by name or numerkally by ma&& number.I’-
Adding entries to the NAMES Table
Modifylng entries In the NAMES Table
Deleting entries from the NAMES Table
T0snlt.a VP ~ynen-alweaw5.3 May. 1881 

16
NUMBERING PLAN TABLE
- _Chapter Contents
Section
16.1
16.2
DescrbtlonPfKYp
NUMBERING PLAN Table for Multi-Cabinet Networking...................................16-1
How The NUMBEJ3lNG PLAN Table is Used.........................................16- 1l-km to configure the NUMBERING PIAN Table......................................16-lusing INSTALL.................................................................16-2
Using UPDATE.................................................................16-2
NUMBERING...

INTRODUCTIQN
Both multi-cabinet and remote networking instakw use the NUMBERING PLAN Table.
Multi Cabinet Networking refers to situations where more than one 
Toshiba VP Q&m is linked
together behind one PBX at one location.
Remote Networking refers to situations where Toshiba VP Systems are located at different
locations behind different phone systems.
In this chapter, you will find the following sectionsl
A w Reference Guide containing the commands most commonly used with the
NUMBERING PLAN Table.l
A...

Quick Reference Guide
NUMBERING PIAN Table
CommandAddMonal InformWon
-NUMBERING PUN TableThis table is used with Networking. For each cabinet in
the network, the NUMBERING 
PIAN Table defineszl
Location of each system on the networklInitial digits dialed to reach that location
l 
MaiIboxlength
fl
Number of digits to strip
. 
.._NUMBERING PLAN Table and
the INSTALL Program
INSTALL question nnmher 6 asks for the location name,
initial digits, network 
mailbox Iength, and number of
digits to strip.
.,UPDATE...

NUMBERING PLAN T&e16-l
-
16.1NUMBERING PLAN TABLE FOR MULTI-CABINET
NETWORKING
Multi Cabinet Networking refers to situations where more than one Toshiba VP System is linked
together behind one 
PBX at one location.
- _
For each cabinet in the mu&cabinet network, the NUMBERING PUN Table d&m-.
lLocation of each system on the network
lInitial digits dialed to reach that location
lMailbox length on the co-located cabinet
0Number of digits to strip (always zero for co&cat&i cabinet entries)
Example of a...

16-2 c#7figlJration Mawal-
NETWORK MAILBOXLENGTHl%e total number of digits the Toshiba VP System should gather to
amplete a call to a mailbox in another cabinet. For example, if
-es with the fim digit 6 are three digits long (6>(xx enter 3. .NUMBER OF DIGITS
For multi-cabinet network locations, this fiekl always has a wJue ofTO STRIP
zero.Used for remote networking, identifies the number of digits io
strip before sending an address to a remote system.
B Using INSTALL
The following is the question from...

NUMBERING PLAN TatSe16-3mADD
Addlng a cabinet to the network
First ADD a new route to the ROUIE Table, if needed, then add
the new location to the LOCATION Table, then add the new
location to the NUMBERING PLAN 
TabIe.
DELETEDeleting a cabinet from the network
First DELETE the location from the NUMBERING PIAN Table,
then delete the location from the LOCATION Table, then delete the
route from the ROUIE Table, if needed.
b WARNING ( ”
An entry in the NUMBERlNG PLAN Table cannot bedeleted if a mailbox on a...