Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual

20-4 Configuration h4anual
During INSTALL, the questions used to define the SCHEDULE Tables are:
When finished entering all time periods for this SCHEDULE Table, press 
-1 at the
colon. The following question is asked:
n Using UPDATE
Use the UPDATE program to:l
LIST one or all SCHEDULE ‘Gblesl
MODII?’ a time period contained in a table.
MODIPl the default value in a table
l
ADD a SCHEDULE Tablel
ADD or DELETE time periods in a SCHEDULE Table
Tie 
pericds are numbered 1 through 8. When using the UPDATE...

LET
MOBIFYSCHEDULE 
TaMe 20-5-
ktlng the SCHEDULE TSbleS
This command prochces a list of one or all SCHEDULE Tables.Either 
enter the number of the table to be listed, or press IEater]’
at the prompt for all tables.Modifying a Time 
Period
,
mAn INFORMATION Table must be defied before it can be
used in a 
SCHEDULE Table. 

B-6 Confipmtion MamaI-
Modtfyhg a default INFORMATION Table number
017An INFORMATION Table must be defined before it can be
used in a SCHEDULE Table.
ADD
DELETEAdding a the periodUsed to create a SCHEDULE Table for a COS, and to ADD a time
period to an existing SCHEDULE Table.
When adding a new time period, existing data is not altered.If all 8
time perkds are already used, an error message is given when
attempting to add to an existing table.
LUThe default INFORMATION Table number is only asked for
when...

SCHEDULE Table 22-7
Deleting an Entke Table
This deletion can be used successively to delete an entire table.
When 
all previously used time periods are deleted (and only the
default remains), the 
lbshiba VP System asks if you want to delete
the entire table.
b WARNING 4
If a SCHEDUlE Table is in use, it cannot be deleted. 

21SLOTS TABLE
.-
Chapter Contents
SectionDescrbtionPaae
21.1
21.2
21.3
Un&@anding the SLOTS Table......................................................21-1
Line Card Slots.................................................................21-3htegration Card Slots...........................................................21-3
Application 
CardSlots...................................................+........21-4How the SLOTS Table is Used.........................................................21-5
Line...

INTRODUCT.ION
Only the VP 300s and VP 300 use the SLOTS Table. The VP 100 uses the PORTS Table in place
of the SLOTS Table.
.--
The SLOTS Table allows confiiration of each line card, integration card, and application card in
the VP 
%%/VP 300 on a slot-by-slot basis Line Interface Cards (LIC), Telemarketing Line
Cards 
W), Direct Access Cards @AC), integration cards (e.g., MIC), and application cards
(e.g., 
VPw4.s ACP card) are individually configured.
WConsult Toshiba Tel-m Product Marketing for...

Quick Reference Guide
.‘-
SLdTS Table
Description
SLOTS Table
Allows individual configuration of the VP 3OOsIVP 300 line
cards, integration cards, and application cards.
Une Card SlotsSlots Al-Al2 may be configured for Line Interface Cards (LIC),
Telemarketing Line Cards 
WC), and Direct Access Card
@AC). The SLOTS Table contains information about each port.
Fields contained are:
0Type of line cardl Port number
l
PBX extension number connected to each portl Port cos
l
Port answering mode - Ax, CX MXl...

Quick Reference Guide
.‘^
SLOTS Table
Description
lntegratlon Card SlotsSlots A9-A12 may be configured for integration cards. Slots
contain information about each integration unit on the card.Fields contained are:
l Integration card type
0Integration unit number
0 Callprocessingline appearance or message waiting linkl
Link used for lamp Message Waiting Notificationl
System default Iink for Message Waiting Notificationl
COS assigned for Message Waiting Notification
The following changes to integration...

Quick Reference Guide
.‘-
SLOTS Table
CommandDescription
SLOTS Table and the INSTALL ProgramThe INSTALL program prompts for slot configuration data.
UPDATE Command OptionsLIST
.L SLOTTo list the entire SLOTS Table.
.L SLOTTo list details about a specific slot.
/
ADD.A SLOTTo add a slot to the SLOTS Table.
MODIFY.M SLOTTo change any of the values. All information for the port
must be entered.
DELETE.D SLOTTo delete a slot from the SLOTS Table.
The . prompt is displayed by the UPDATE program. 

21.1UNDERSTANDING THE SLOTS TABLE’
The SLOTS Table contains information about each slot in Shelf A
The SLOTS Table allows the individual 
confiition of each line card, integration card, and
application card. 
Shelf A contains 12 slots, which can be configured as follows:“-
Slot NumberlPpeofCardAhwed
Al-Al2Available for line cards (e.g., LIC, TLC, or DAC) l
A9-Al2Available for integration cards (e.g., MIC) l
Al2Available for an application card (e.g., VPww&s ACP card) l
8Consult Toshiba Telecom Product...