Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual

17
PORTS TABLE
.-
Chapter Contents
17.1172
17.3
LhWSanding the PORTS TaMe......................................................17-1HOWthePORTSTaM~i!SU&........................................................17-2&wtoconfigutethePOATsTaMe..................................................
..17- 4
Using INSTALL.................................................................17-4
Using UPDATE.................................................................17-S
Using 
the System List...

.,.
INTRODUCTION
TheVP100usesthePORTSTable. TheVP3WsandVP300usetheSU3TSTable.
The PORTS Table uxhns, for each port:.--l 
PBXextensbn
’class of se* (COS)l 
Arswaingmodel
Whether message waiting or network messages can be sentl 
IftheR&itaVPSystemselftestshouldberun
The PORTS Table contains information about each port including the PBX extension number of
the port.. 

Quick IReference Guide
.--
PORTS Table
CommandDescription
PORTS TableA port is the physical link between the Toshiba
VP System and the phone system. The table contains
information about each port. Fields contained are:
lThe phone system extension number.
0The port COS.
0The pm answering mode - Ax, CX, h5X
0Port used for outcall
0Port used for selftest
SYSTEM Command
LIST
@L PORT XLists details about a specific port.
PORTS Table and the INSTALL ProgramEnter information as listed above, separated by...

Mx
h.ltemal cdl.5
When the PBX allows forwarding of internal calls only, stations can be
forwarded to CX ports for internal messaging. This enables an
employee to leave a message for an unavailable station without first
calIing the lbshiba VP System. Remember, callers need to, know the
extension number to leave a message. 
callers who came through the
operator, and then are forwarded to CX ports, may not 
)cnow the
extension number.
I’-
Message Center (Message-Taking only)
Callers who have reached the...

17.3HOW TO CONFIGURE THE PORTS TABLE
Each port connected to a PBX extension can be comigured to handle calls differently. The
following describes the valid or invalid entries for the POKI?3 Table fields.
EXTENSIONSDefines each PBX extension number connected to a Toshiba VP System
port. A mailbox extension number 
caurmt be the same as a port
extension number.
cos
ANSWER MODE
OUTCAU
TEST
The COS assigned to each port defies the feature attributes associated
with that port.
COS also directs the Toshiba VP...

II Using UPDATE
Use the UPDATE program to:
*LIST the PORTS Table orl
MODIFY the PORTS Table
ADD and DELETE cannot be used in the PORTS Table.
LIST
LlStlng the PORTS Table
MODIFYModifying the PORTS Table
: : :.:. .,:::.::.:.::.;:.:..:~::~::.::~ji:::::::::;::::::::::::::::~:~~:~.:;:~-~:~::::.::::~:::::::::::::::::::::::::.:::::::::::::::::,:::::::::~::::::~:.:.: ,.,.,.,)~,~,~~,~ ,:,,,:,.,):,:,: :,:,yz.x.g2~j.;T . . : : :.:;;,-.,: :...

17-6 Configuration Manual-
nUsing the System List Command
A system level command can be used to LIST specifk information about particular ports.At
theetype:
L PORT X
Where X-POW number to list.
The following 
is an example of a printout.