Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual

INFORMATION Table 13-31w
Example of a port INFORMATION Table:
Ustlng all COS ushg a specl?lc INFORMATION Tables
MODIFYModifying an INFORMATION Table
Use MODIFY to alter index values within an INFORMATION
Table. Enter a 
“?” after the commandto get extended wording of
the question. Omit the “?” for a short version.
:: 

ADDb WARNING 4
If you attempt to modify an index value pertaining
to a software package not installed the Tixhik VP
system 
displayx
.Software Packages
SW-XfxxIlrntraMessaging
SW-XOtH34Networking
SW-XII019Sie Digit Menus
SW-XfXQOIncoming Call Restriction
SW4021FE0 Queuing
SW&U22Scripted Prompting
SW-XtXl23NamesDirectoxy
SW-xc031Adaptive Integration
DSoftware part numbers are different for VP 100 and
VP 
3oosNp 300. For the x in the above numbers, substitute 2
for VP 100 numbers, and 
substitute 3 for VP...

INFORMATlON Tab 12-33
-
DELETEDeleting an INFORMATION r&Jo
AlI SCHEDULE Tables are checked to insure the IWOFWATION
Table being deleted is not 
refmenti
ll7 An INFORMAlION Table is not deleted if it is still referred to in
a SCHEDULE Table.
. 

LOCATION TABLE
- _Chapter Contents.  .  :_-. ,
SecHonDescrbtlonPaaa
14.1
14.2
LOC4llON Table for Multi-Cabinet Networking..........................................14-lHow the LOCATION Table is Used.................................................14-1How to Configwe the LOCNlON Table.............................................14-1
Using INSTALL.................................................................14-2
Using UPDATE.................................................................14-2
LOCXTION...

INTRODUCTIONBoth multi-cabinet and remote networking installations use the LOCATION Table.
Multi-cabinet networking refers to situations where more than one Toshiba VP System is linked
together behind one PBX at one location.
Remote networking refers to situations where Toshiba VP Systems are located at different
locations behind different phone systems.
The 
LOCATION Table describesl
Other locations in a remote networkl
Other cabinets in a multi-cabinet network
The table contains the following...

Quick Reference Guide
LOCATIO’N fableCommandDescription
-LOCATION-Table
This table is used with Xxhiba VP System Networking. The table
contains the following information:Location name
Route choices
Whether the location has a system
Network protocol used
PublicAE network numbers usedLOCATION Table and
Install question number 5 asks for the new location name, whetherthe 
INSTALL Programit is located on the same PBX, and the route name used for access.UPDATE Command 
Optlons
LIST.L Lot
MODIFY.M Lot
To list...

r4.1LOCATION TABLE FOR MULTI-CABINET NETWORKING
Multi-cabinet networking refers to situations where more than one Zxhiba VP System is linked
together 
behind one PBX at one location.
The 
LoCATION Table ior a multi-cabinet networkcznhns the name of each cabinet in-the
networlrandthenameoftberontensedtoaccessit.
Example of a LCKATION Table:
nHow the LOCATION Table is Used
The Toshiba VP System uses the LOCATION Table to find:l
Which route to use from the ROUT& Table amtaining the digits to access each...

BUsing INSTALL_’
This is the question from INSTAU that defines the locations on the network.
I -.-:
Using UPDATE
Use the UPDATE program to LIST, MODIFY, ADD or DELETE a Network Location.
LISTUsting the LOCATION Table
The entire LocAnoN Table or just one location can be listed. To
LIST all, return at the LST : prompt. To list 
onebb type the number of
the location you wish to list.
Tc&lbavPspwlm Rekav5.3 May.leol 

LOCATIQN Table 14-3
YODWYModifying an existhg location.ADD
Addlng a cabinet to the networkFirst ADD the new route to the ROUTE 
able, if needed, then add
the new location to the LOCAlTON ‘E&k, then add the location tothe NUMBERING PLAN 
%ble. 

14-4 Confiauration Manual-
DELETETo DELFE a cabinet from the network, first delete the lochonfrom the 
WERING PLAN Table. then delete the location frqm
the LOCATION Table, then 
deIetc the route from the ROUIZ
Table, if needed.
E?A bcation can not be deleted if it is defined in the
N-UMBERING PLAN Table.