Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual

m Using UPDATE 
Use UPDATE to: 
l LIST one or all Distribution Lists or Extended MaiIboxes. 
l LIST all Distribution Lists associatedwithaspecifiimaibox. 
.-- 
l LIST all Distribution Lists associated with a specific network address. . 
l ADD mailboxes to a Distribution List or Extended Ma&ox 
l MODIFY the type of the list, Distribution to Extended and vice-versa 
l DELETE mailboxes from a Distribution List or Extended Mailbox 
LIST Usthg Distribution Lists and Extended Mallboxes 
Ustlng all Dlstn’budon...

DISTRIBUTiON LIST Table Q-7 
- 
Llstlng eIl Dlstributlon Lists associated wtth a specific network 
address 
This command applies only to multi-c&met or remote networking 
systems. lh produce. a printout of the pilot numbers of all lists of 
which a qecific network address is a member, enter the entire 
network ma&ox number or the network initial digits. 
’ 
ADD Adding Mailboxes to Distribution Lkts and Extended Mailboxes 
MODIFY New lists and additions to existing lists are made through this 
command....

9-8 Configuration Mamat 
Repeat this step to convert and Extended Mailbox back to a 
Distribution List. 
DELETE Delethg Distribution Lists or Extended Mallboxes 
usethisco mmand to DELETE a mailbox from a list, or to delete an 
entire list. After asking for the pilot number, the Toshiba VP 
System prompts for the mailbox to be deleted. 
To delete one mailbox, enter: 
.D DIST X [Enter7 
where X is the LIST NUMBER. 
To delete all mailboxes in a list, enter: 
.D DIST ALL 
Deleting a Mailbox from a Ust 
lU...

DISlRI@UTlON LlsFlab+~~ 9-9 
-  

10 
DTMFINT TABLE 
Chapter Contents 
Section 
10.1 
10.2 
10.3 DescriDtion PEKIe 
Ur&&anding the DTMFINT Table .................................................... 10-l 
Feldiypes.. ................................................................... 10-Z 
Field Format Specifications ....................................................... 10-3 
Call Types ..................................................................... 10-4 
WtoConfiguretheDTMFlNTTable...

INTRODUCTION 
‘._ 
This chapter descriis the usage of the DTMFINT 
the individual formats. Table. Detail is given to the configuration of 
.-.(, 
.‘- 
At the end of this chapter is a section on error checking, which explains the types sf errors that 
are checked during configuration.  

Quick Reference Guide 
DTMFIdT Table 
Command Description 
DTMFINT Table 
The DTMFINT 7hble interprets an incoming DTMF call 
record by identifying the type of call, matching it with a 
suitable call action by the Toshiba VP System, and 
collecting the Called and Calling party ID. 
DTMFINT Table and the INSTALL Program There are no questions in the INSTALL program 
pertaining to the DThfPINT 
Table. Configure by using 
the 
UPDATE program after the instahation is complete. 
i 
UPDATE Command Options...

10.1 UNDERSTANDING THE DTMFINT TABLE 
The DTMFXNT Table interprets an incoming D’ThIF &I record by identifying the type of call, 
matching it with a suitable call action by the Toshiba VP System, and collecting the Called and 
cal.lingPartyID. 
Since each individual PBX manufacturer sends proprietary DTMF codes to identi$call types, and 
further, will send the various items of information in the order they choose, the DTMFINT Table 
is very flexible to accommodate the great variety of call record formats...

1 O-2 Configuration Manual - 
m Field Types 
The elements in a DTlAPlNT Table define the specific digits expected to be received in a call 
record and the order in which they are expected. Depending on what the call record format 
is, the celled party ID may be sent after the call type code, or the calling party ID may be 
sent. There may be DTMF characters inserted into the call record to delimit the separate 
fields. PBX extensions may have a fcved length of digits or may be variable length. All of...

n Field Format Specifications 
The number of DTh4F digits expected for each element in the call record is specified in one 
of several ways: 
l A fmed number of digits can be entered directly into the DTh4FINT Table field 
description. 
l 
l 
The length of an element can refer to the System karneter Table, which controls the 
field lengths for the various DTMFINT 
field types. 
l The length of a field can be declared to be of variable length with, or without, a 
terminating digit that defmes the end of a...