Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program *09 – [PDN], [PhDN], DH, ACD or Modem DID Ext. Assignments
Strata DK Programming 5/993-25
System & Station
Program *09 – [PDN], [PhDN], DH, ACD or Modem DID 
Ext. Assignments
Processor Type:See legend below
Program Type:Station
Initialized Default:See legend below




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] 
Port 
Range[PDN] Ext. 
#[PhDN] 
Port 
Range[PhDN] 
Ext. #DH Group 
PortsDH Ext. # 
DefaultACD 
Port #ACD Ext. #RMDS/IMDU 
Modem...

System & Station
Program *09 – [PDN], [PhDN], DH, ACD or Modem DID Ext. Assignments
3-26Strata DK Programming 5/99
Program *09 Overview
This program assigns the routing destinations for incoming DID line calls. 
Program 
09 DID extension numbers can be routed to [PDNs], [SDNs], or [PhDNs], ACD 
Groups, or Distributed Hunt groups. Each [PDN]/[SDN] and/or [PhDN] can appear and ring 
(immediate, 12 sec. delay or 24 sec. delay with Program 
71, 
72 and 
73) on up to 120 
telephones. A DID extension number...

System & Station
Program 10-1 – System Assignments, Part 1 of 3
Strata DK Programming 5/993-27
System & Station
Program 10-1 – System Assignments, Part 1 of 3
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:LEDs 07, 08, 09, 16, 18, 19 and 20 are ON




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Button/
LEDXLED ONLED OFF
20
Two-CO Line Conference/Allowed Not Allowed
Two-CO line Conference must be allowed for Tandem Line, DISA, 
CF-EXT, and DNIS external...

System & Station
Program 10-1 – System Assignments, Part 1 of 3
3-28Strata DK Programming 5/99
Program 10-1 Overview
You can make the following system assignments with Program 10-1:
LED 20: Two-CO Line Conference
Two lines can be conferenced with one or two telephones (digital, electronic, or standard). 
Conference (see LED 19) in this program to enable this feature. Also, Two-line Conference must 
be allowed for DISA, CF-EXT, and DNIS external routing use of outgoing lines. CO lines must be 
enabled for...

System & Station
Program 10-1 – System Assignments, Part 1 of 3
Strata DK Programming 5/993-29
System & Station
LED 07: Ring Transfer of CO Line Allowed
This option defines station operation for transferring [DN] and CO line calls. If Ring Transfer is 
allowed, the system will allow “blind” transfers to busy or idle stations. The transferring station 
may release a transferred call before the called party answers. If not allowed, the system will allow 
supervised transfers only—the called station must...

System & Station
Program 10-2 – System Assignments, Part 2 of 3
3-30Strata DK Programming 5/99
Program 10-2 – System Assignments, Part 2 of 3
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:LEDs 02, 14, 15, and 16 are ON




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Button/
LEDXLED ONLED OFF
20Padded DTMF Tone Return 
When DialingDTMF/No DTMF Per Prog 10-2, LED 11
19External Conference Amp 
Connected to PEKUNo External Amplifier Connected
18External...

System & Station
Program 10-2 – System Assignments, Part 2 of 3
Strata DK Programming 5/993-31
System & Station
Program 10-2 Overview
You can make the following system assignments with Program 10-2:
LED 20: Padded Tone Return
With some Central Offices, callers may experience clicking or squealing sounds or a loud DTMF 
tone return during or after dialing. To counteract this, it is recommended that padded tone return or 
no tone return be enabled (LED 20 ON) or No DTMF tone return (LED 20 OFF and LED 11...

System & Station
Program 10-2 – System Assignments, Part 2 of 3
3-32Strata DK Programming 5/99
LED 15: External Page Included with All Call Page
External speakers and all electronic and digital telephones are paged by dialing: Directory Number 
[DN] + 
. The$OO&DOO3DJHbutton is used to page all digital and electronic telephones only; 
external speakers are not included when using the button.
If the All Call voice page access code (
) is entered, or if the paging number is dialed on 
incoming...

System & Station
Program 10-2 – System Assignments, Part 2 of 3
Strata DK Programming 5/993-33
System & Station
LED 08: Display Dialed Number Timing
An LCD telephone will display a dialed number on outgoing calls and the CO line (Program 93) 
ID name, DNIS, ANI, or Caller ID information on incoming calls for either 15 or 60 seconds 
before the display changes to the elapsed time of the call.
LED 07: Standard Telephone Distinctive Ring
If Distinctive Ring is enabled (LED 07 ON) the CO line call ring...

System & Station
Program 10-2 – System Assignments, Part 2 of 3
3-34Strata DK Programming 5/99
This feature applies to loop and ground start lines, and also Tie, DID, and DNIS lines assigned 
with Program 17, LED 05 ON; these lines will use Program 71 (1~3) assignments. Tie and DID 
lines assigned with Program 17, LED 05 OFF cannot be routed to different destinations in the Day/
Day 2/Night modes.
LED 02: Call Forward/Station Hunt Override From DSS Console (DK424 and DK40i only)
If a station has...