Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

Strata DK Programming 5/992-1
Initialization & Test
Initialization & Test2
This chapter gives you information on the Strata DK’s Initialization and Test programs. The 
programs in this chapter are not given in numerical order, rather in order of importance. These 
programs include:
©Program 91-9 – System Initialization
©Program 90 – Initialize Programs 00~99
©Program 91-1 – Automatic PCB Recognition and Port Renumber
©Program 91-2 – Data Transfer from Temporary Memory to Working Memory
©Program 92 –...

Initialization & Test
Program 91-9 – System Initialization
2-2Strata DK Programming 5/99
Program 91-9 – System Initialization
Processor Type:DK14, DK40i, All RCTUs 
Program Type:Initialization
Initialized Default:See individual programs
Program 91-9 Overview
NoteAlways run Program 91-9 before entering the customer database when first installing a 
system or when its software must be set to the default configuration, but not while system 
is in service.
CAUTION!If you run Program 91-9 while the system is...

Initialization & Test
Program 91-9 – System Initialization
Strata DK Programming 5/992-3
Initialization & Test
Program 91-9 Example
Action (press buttons + LED Buttons)LCD Response
1. Use the programming LCD electronic or digital telephone. (See 
“Programming Examples” on Page 1-16.)No. N-N1
Jan 20 Sun 06:43
1. N-N is the Program Telephone [DN].2.




Enter programming mode. (Do not press [DN] button.)Program Mode
3.
6SNU6SHDNHU+ROGAccess Program 91. System beeps after 6SNU6SHDNHU is...

Initialization & Test
Program 90 – Initialize Programs 00~*99
2-4Strata DK Programming 5/99
Program 90 – Initialize Programs 00~*99
Processor Type:DK14, DK40i, All RCTUs 
Program Type:Initialization
Initialized Default:See individual programs
Program 90 Overview
Program 90 enables you to clear all customer data and initialize individual programs or range of 
programs. 
Important!When installing the system, you must run Program 91-9 which runs Program 90 
(before running any other program); if you do not,...

Initialization & Test
Program 90 – Initialize Programs 00~*99
Strata DK Programming 5/992-5
Initialization & Test
Program 90 Example
ActionLCD Response
1. Use the LCD programming phone per Minimum Hardware 
Requirements on -14.No. N-N1
Jan 20 Sun 06:43
1. N-N is the Program Telephone [DN].2.
Enter Program mode by pressing 



(Do not press 
[DN] button.)Program Mode
3.
6SNU6SHDNHU+ROGAccess Program 90. System beeps after 6SNU6SHDNHU is 
pressed to indicate program number may be...

Initialization & Test
Program 91-1 – Automatic PCB Recognition and Port Renumber
2-6Strata DK Programming 5/99
Program 91-1 – Automatic PCB Recognition and Port 
Renumber
Processor Type:DK14, DK40i, All RCTUs 
Program Type:Initialization
Initialized Default:None
Program 91-1 Overview
Program 91-1 makes slot code assignments to installed PCBs that do not have options - such as a 
PDKU without a Data Interface Unit or Off-hook Call Announce (OCA), the common control 
without a Dual-tone Multi-frequency...

Initialization & Test
Program 91-1 – Automatic PCB Recognition and Port Renumber
Strata DK Programming 5/992-7
Initialization & Test
Program 91-1 Example
Action (press buttons + LED Buttons)LCD Response
1. Use the LCD programming phone per Minimum Hardware 
Requirements on -14.No. N-N1
Jan 20 Sun 06:43
1. N-N is the Program Telephone [DN].2.




Enter programming mode. (Do not press [DN] button.)Program Mode
3.
6SNU6SHDNHU+ROGAccess Program 91. System beeps after 6SNU6SHDNHU is 
pressed to...

Initialization & Test
Program 91-2 – Data Transfer from Temporary Memory to Working Memory
2-8Strata DK Programming 5/99
Program 91-2 – Data Transfer from Temporary Memory 
to Working Memory
Processor Type:DK14, DK40i, All RCTUs 
Program Type:Initialization
Initialized Default:See individual programs
Program 91-2 Overview
Program 91-2 simulates turning system power OFF for five seconds then ON to transfer data from 
temporary memory to working memory.
This power OFF / power ON sequence is required when...

Initialization & Test
Program 92 – Initializing Misc. Backup RAM
Strata DK Programming 5/992-9
Initialization & Test
Program 92 – Initializing Misc. Backup RAM
Processor Type:DK14, DK40i, All RCTUs 
Program Type:Initialization - Includes: Initializing Speed Dial Number, VM ID Codes, Character 
Message Memory, Timed Reminders, Digital Telephone Volume, Called ID, ANI, and 
Call Forward Backup RAM
Initialized Default:See individual programs
Program 92 Overview
Program 92 clears all previously entered or...

Initialization & Test
Program 92 – Initializing Misc. Backup RAM
2-10Strata DK Programming 5/99
lProgram 92-9 does not affect Call Forward External or Fixed Call Forward settings.
lYou must power the system OFF then back ON to clear telephone LCD Call Forward Displays 
and Call Forward button LEDs. Call Forward memory is cleared when you run Program 92-9, 
even if system power is not cycled.
Program 92 Example
Action (press buttons + LED Buttons)LCD Response
1. Use the programming LCD electronic or...