Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 03 for DK40i – Flexible PCB Slot Assignments
Strata DK Programming 5/993-5
System & Station
Program 03 for DK40i - Overview
Program 03 tells the system what type of optional PCBs are installed in the Expansion KSU. You 
must run Program 03 after installing PCBs with options such as OCA, DIU, etc. Also, run Program 
03 for each PCB slot when installing a PCB in that location.
It is not necessary to run Program 03 for slots 00~14. The DK40i automatically assigns the Base 
KSU PCBs...

System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
3-6Strata DK Programming 5/99
Program 03 for DK424 – Flexible PCB Cabinet Slot 
Assignments
Processor Type:All RCTUs
Program Type:System
Initialized Default:PCB codes of PCBs installed prior to running Programs 91-1 or 91-9;
Code 00 for empty slots




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG 
DK424 Base Cabinet 1
Slot Number00
(R11)01 
(RCTU)S11S12S13S14S15S16
PCB Code
PCB Type
Options...

System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
Strata DK Programming 5/993-7
System & Station
DK424 PCB Codes
See the following text for specific installation rules on the above PCBs. DK424 Expansion Cabinet 5
Slot NumberS51S52S53S54S55S56S57S58
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 6
Slot NumberS61S62S63S64S65S66S67S68
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line...

System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
3-8Strata DK Programming 5/99
Program 03 for DK424 - Overview
Program 03 tells the system what type of optional PCBs are installed.
The Program 03 record sheet is the main record for the hardware configuration of the entire 
system. It provides space to record station ports assigned to the station, Tie, and DID line PCBs 
and line numbers assigned to the ground loop start, CO, Tie, and DID line PCBs.
Use the DK424 PCB Code...

System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
Strata DK Programming 5/993-9
System & Station
RCIU/RCIS or RCIU2/RCIS
When installing RCIU2/RCIS, enter the Caller ID circuit numbers on the record sheet in place of 
the CO line number. Each RCIU2/RCIS slot uses eight Caller ID circuits. RCIU2/RCIS circuit 
numbers are assigned automatically in numerical order (001~200) starting with the lowest slot 
number, to the highest RCIU2/RCIS slot number in 8-circuit increments....

System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
3-10Strata DK Programming 5/99
Program 03 Example
Action (press buttons + LED buttons)LCD Response
1. Use an LCD programming phone per Minimum Hardware 
Requirements on Page 1-14.No. 205
Jan 20 Sun 06:43
2.




Enter programming mode. (Do not press [DN] button.)Program Mode
3.
6SNU6SHDNHU+ROGAccess Program 03. System beeps after 6SNU6SHDNHU is 
pressed to indicate program number may be entered.Program = 03
Data...

System & Station
Program *03 for DK424 – Cabinet Type Identification
Strata DK Programming 5/993-11
System & Station
Program *03 for DK424 – Cabinet Type Identification
Processor Type:RCTUE/F only
Program Type:System
Initialized Default:All cabinets = 1
Program *03 - Overview
You must run this program when using the RCTUE/F processor. It identifies which type of 
cabinets are installed (DK424 or DK280). The RCTUE/F processor can be installed in a DK424 or 
DK280 base cabinet. The expansion cabinets can...

System & Station
Program 04 – Station Logical Port [PDN] Assignment
3-12Strata DK Programming 5/99
Program 04 – Station Logical Port [PDN] Assignment
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:See [PDNs] in the record sheets
DK14 Record Sheet
 
1. Supports a Digital Telephone or a DDCB Door Phone Control Box.
2. Supports Alternate Background Music (BGM).
DK40i Record Sheet
Important!Refer to Chapter 2 – DK40i Configuration before installing PCBs in slots 15~18.


...

System & Station
Program 04 – Station Logical Port [PDN] Assignment
Strata DK Programming 5/993-13
System & Station
Expansion Slot Configuration Record1: Slot 15 ______  Slot 16 ______  Slot 17 ______  Slot 18 ______ 
1. Expansion slots 15~18: See DK40i Configuration tables in Chapter 2 of the Strata DK Installation and Maintenance Manual.
Physical 
PortsModular Jack 
Location RecordLogical Ports[PDNs]
(Initialized)
Port Type for Different Base Configurations
TCOU or TDDUTCOU, TBSU2 
or 
TDDU+KSTU2
2....

System & Station
Program 04 – Station Logical Port [PDN] Assignment
3-14Strata DK Programming 5/99
DK424 Record Sheet




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeInitialized [PDNs]DISA PortReserved for Special Functions
RCTUA 000~031 200~231 039 032~039
RCTUBA/BB 000~079 200~279 089 080~089
RCTUC/D 000~239 200~239 249 240~249
RCTUE/F 000~335 100~435 344 336~349
Physica
l PortsModular Jack 
Location 
RecordLogical 
Ports [PDN]Cabinet and Slot...