Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 10-3 – System Assignments, Part 3 of 3
Strata DK Programming 5/993-35
System & Station
Program 10-3 – System Assignments, Part 3 of 3
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:LEDs 11, 13 and 20 ON, all other LEDs OFF
Program 10-3 Overview
You can make the following system assignments with Program 10-3:
LED 20: SMDI Message Desk Number
For CO line calls answered by Voice Mail/Auto Attendant devices, either the three-digit CO line 
number...

System & Station
Program 10-3 – System Assignments, Part 3 of 3
3-36Strata DK Programming 5/99
LED 19: Speed Dial Entry Timeout
Station users can either have up to one minute or up to three minutes to store a Speed Dial number 
or memo. If they do not store the number or memo within the set time, their station exits the Speed 
Dial-storage mode and returns to the normal idle state. The timer is required because of the User 
Programmable Feature Buttons feature, which allows the [PDN], 
+ROG, and &QI7UQV...

System & Station
Program 10-3 – System Assignments, Part 3 of 3
Strata DK Programming 5/993-37
System & Station
LEDs 13-10: SMDI Station Number Digit Length
Set LED 10-13 ON so that the hex values add up to the Voice Mail station digit length for SMDI 
VM interface. (Example: For VP100 or Stratagy/Stratagy DK SMDI interface, set LEDs 10, 11, 
and 12 on for 7 digits (1+2+4=7).
Do not set LED 10-13 OFF for Toshiba proprietary interface; it is no longer supported by DK 
systems.
This refers to the station...

System & Station
Program 10-3 – System Assignments, Part 3 of 3
3-38Strata DK Programming 5/99
LEDs 01~04: Amplified Conference Assignments
Light LEDs 01~04 to identify which PEKU ports should be connected to external amplifiers. 
External Amplified Conference is provided by customer-supplied two-way amplifiers connected 
to system PEKU ports to amplify “two-line” calls.
©DK424 and DK40i: Up to four amplifiers can be connected, depending on the DK system 
type (two PEKU ports per amplifier). The number...

System & Station
Program *10 – Enhanced 911 Operation
Strata DK Programming 5/993-39
System & Station
Program *10 – Enhanced 911 Operation
Processor Type:DK14, DK40i, all RCTUs
Program Type:System
Initialized Default:See each program
Program *10 provides two QSTU2, RSTU, KSTU2, RDSU, PSTU, or PESU ports to be assigned 
to interface with central office E911 trunks.
E911 enhanced operation provides locator information to the responding agency to provide more 
complete name and address information,...

System & Station
Program *10 – Enhanced 911 Operation
3-40Strata DK Programming 5/99
Programs *10-11 and *10-12 Overview
Programs 
10-11 and 
10-12 assign which QSTU2, KSTU2, RSTU2, RSTU, RDSU, PSTU, or 
PESU standard telephone ports are connected to the E911 interface unit.
Important!Program 04 Directory Number data must be blank for E911 QSTU2, KSTU2, 
RSTU2, or RSTU ports.
Program *10-91 – E911 Interdigital Time
Initialized Default:15 seconds
Program *10-91 Overview

10-91 assigns the time allowed to...

System & Station
Program 12 – System Assignments, Basic Timing
Strata DK Programming 5/993-41
System & Station
Program 12 – System Assignments, Basic Timing
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Program 12 Overview
This program assigns system times for ring down, disconnecting calls, pause times, flash times, 
auto attendant, DISA, Call Forward External, and DNIS and DTMF receiving decoding.
Code 1: Standard Telephone Ring Down Timer
This feature is available for Release 4.0 and...

System & Station
Program 12 – System Assignments, Basic Timing
3-42Strata DK Programming 5/99
Code 3: Pause Timing
Code 3 enables station users to program short and long pauses in Speed Dial numbers. Applies to 
pauses inserted in Speed Dial numbers used for both telephone voice calls and data calls from data 
interface units. The short pause length can be set system wide for either 1.5 or 3 seconds with this 
program. The long pause is always 10 seconds.
Code 4: Flashing Timing
When on a CO line, a...

System & Station
Program 13 – Defining the Message Center
Strata DK Programming 5/993-43
System & Station
Program 13 – Defining the Message Center
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:No port assigned
Program 13 Overview
This program assigns a station as the Message Center. 
Each digital, electronic and standard telephone can receive a maximum of four message waiting 
indications per [PDN] and each [PhDN] owned by the station. One of these four is reserved for...

System & Station
Program 15 – Ground/Loop/Tie/DID Line Options
3-44Strata DK Programming 5/99
Program 15 – Ground/Loop/Tie/DID Line Options
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:All LEDs are OFF




  6SNU   +ROG  6SNU+ROG 6SNU+ROG 6SNU+ROG
Processor TypeCO Line RangeProcessor TypeCO Line Range
DK14 001~004 RCTUBA/BB 001~048
DK40i 001~012 RCTUC/D 001~144
RCTUA 001~016 RCTUE/F 001~200
Program Code
ProgramLED ONLED OFF
Line
LED...