Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 27 – DKT Handset/Headset Receiver Volume Level
Strata DK Programming 5/993-65
System & Station
Program 27 – DKT Handset/Headset Receiver Volume 
Level
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:VR=2
Program 27 Overview
This program sets the initial off-hook volume level for each digital telephone handset and/or 
headset. This level can be changed with the digital telephones volume control button while the 
handset or headset is off-hook, but it...

System & Station
Program 28 – DSS Console/Attendant Telephone Assignments
3-66Strata DK Programming 5/99
Program 28 – DSS Console/Attendant Telephone 
Assignments
Processor Type:DK40i, All RCTUs
Program Type:Station
Initialized Default:Assigns Console #1 to Attendant Telephone #1; 
Console #2 to Attendant Telephone #2; etc.




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorDSS ConsolesHDSS Consoles
DK14 0 0
DK40i 1~3 1~3
RCTUA 1~3 1~3
RCTUBA/BB 1~4 1~4
RCTUC/D 1~8 1~8
RCTUE/F 1~8...

System & Station
Program 28 – DSS Console/Attendant Telephone Assignments
Strata DK Programming 5/993-67
System & Station
Program 28 Overview
DK40i: allows up to three DSS consoles (DK40i KSU supports one DSS, Expansion Unit 
supports two more). A DDSS console can only be connected to circuit 8 of the DK40i base 
digital ports or a PDKU, and an HDSS console can only be connected to circuits 7 and 8 of a 
PEKU.
©DK424: supports up to eight DDSS consoles, or eight HDSS consoles, or any combination of 
the...

System & Station
Program 29-1~8 – DSS Console and Number Button Assignments
3-68Strata DK Programming 5/99
Program 29-1~8 – DSS Console and Number Button 
Assignments 
Processor Type:DK40i, All RCTUs
Program Type:Station
Initialized Default:See “Program 29 - Initialized Default DSS Console Button Assignments” on Page 3-72
Code Table and Legend




  6SNU   +ROG  6SNU+ROG 6SNU+ROG 6SNU+ROG
Button TypeCodeProcessorPersonal 
Speed Dial Bin 
NumbersSystem Speed 
Dial Bin 
NumbersCO Line...

System & Station
Program 29-1~8 – DSS Console and Number Button Assignments
Strata DK Programming 5/993-69
System & Station
Program 29-1~8 Overview
Each button on the DSS consoles can be flexibly assigned as either a Direct Station Selection 
(
66), Line (&2), or 6 button. The standard equipped 1LJKW7UDQVIHU (17), and $OO&DOO
3DJH
 ($&) buttons may be changed to one of these three types, but not vice versa. 
Station Speed Dial buttons assigned to a DSS console share the associated attendant digital or...

System & Station
Program 29-1~8 – DSS Console and Number Button Assignments
3-70Strata DK Programming 5/99
Program 29 - Initialized Default DSS Console Button Assignments
Group 1 Group 2
DSS
Button No.DK40iRCTUARCTUB
RCTUC/D
RCTUE/FDSS
Button NoDK40iRCTUARCTUB
RCTUC/D
RCTUE/F
01 #000 #000 #000 01 #020 #020 #020
02 #001 #001 #001 02 #021 #021 #021
03 #002 #002 #002 03 #022 #022 #022
04 #003 #003 #003 04 #023 #023 #023
05 #004 #004 #004 05 #024 #024 #024
06 #005 #005 #005 06 #025 #025 #025
07 #006 #006...

System & Station
Program *29 – Add-on Modules Button Assignments
Strata DK Programming 5/993-71
System & Station
Program *29 – Add-on Modules Button Assignments
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:See “Program 29 - Add-on Modules Button Assignments” on Page 3-74
Program *29 Overview
This program allows ADM buttons to be customized. Each ADM button can be programmed as 
either a Direct Station Selection, CO line, System Speed Dial or Personal Speed Dial buttons....

System & Station
Program *29 – Add-on Modules Button Assignments
3-72Strata DK Programming 5/99
Important!Run this program for each station that has an ADM or the ADM will not function. 
Program at least one ADM key for each ADM.
It is impossible to assign [PDNs], [SDNs] or [PhDNs] to DSS consoles or ADMs.
Button Assignments
Add-on 
Module 1
Button 
No.
DK14DK40iRCTUARCTUB
RCTUC/D
RCTUE/FAdd-on 
Module 2
Button No.DK14DK40iRCTUARCTUB
RCTUC/D
RCTUE/F
01 #000 #000 #000 #000 01
20 #020 #020 #020
02 #001...

System & Station
Program 30 – Station Class of Service
Strata DK Programming 5/993-73
System & Station
Program 30 – Station Class of Service
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:LEDs 01, 05 and 07 for all ports




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Processor TypePort RangeDISA PortProcessor TypePort RangeDISA Port
DK14 000~009 010 RCTUBA/BB 000~079 089
DK40i 000~027 035 RCTUC/D 000~239 249
RCTUA 000~031 039 RCTUE/F 000~335 344...

System & Station
Program 30 – Station Class of Service
3-74Strata DK Programming 5/99
Program 30 Overview
Program 30 enables or disables features for individual telephones at the station level. The 
following text describes Program 30 LEDs.
LED 20: SLT/ISDN Terminal “#” Dial
This feature applies to single-line telephones and ISDN station terminals to indicate when a 
number has been dialed and to begin dialing a sub-address. If a 
 is dialed as the first digit, it 
indicates that a feature access code...