Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 77-3 – Night Ringing Over PIOU External Page Zones
Strata DK Programming 5/993-165
System & Station
Program 77-3 – Night Ringing Over PIOU External Page 
Zones
Processor Type:DK40i, All RCTUs
Program Type:System
Initialized Default:Zones 1~4 assigned to tenant 1
Program 77-3 Overview
Each tenants CO lines can be assigned to ring over selected PIOU external page zones during the 
NIGHT mode. Lines must be allowed to Night Ring over External Page in Program 78 or Program 
71 (1~3,...

System & Station
Program 77-4 – RSIU Open Architecture Interface (OAI) Data Output Assignments
3-166Strata DK Programming 5/99
Program 77-4 – RSIU Open Architecture Interface (OAI) 
Data Output Assignments
Processor Type:All RCTUs (Release 3.2 and above)
Program Type:System
Initialized Default:All LEDs are OFF
Program 77-4 Overview
This program is used to enable Caller ID, Automatic Number Identification (ANI), and/or Dialed 
Number Identification Service (DNIS) Numbers (received) to be sent from the...

System & Station
Program 77-4 – RSIU Open Architecture Interface (OAI) Data Output Assignments
Strata DK Programming 5/993-167
System & Station
LED 01/LED 02: RSIU Open Architecture Interface (OAI) Data Output Assignments (Caller 
ID/DNIS/ANI/OAI Output Options)
Turn LED 01 ON if the OAI port should send Caller ID and/or ANI information for ACD calls and 
LED 02 ON if the OAI port should send DNIS Number (not DNIS NAME) for ACD calls. LED 01 
and 02 may be ON or OFF in any combination.
RCTU PCB requires...

System & Station
Program 78 – CO Line Special Ringing Assignments
3-168Strata DK Programming 5/99
Program 78 – CO Line Special Ringing Assignments
Processor Type:DK14, DK40i
Program Type:Station
Initialized Default:All LEDs are OFF




  6SNU   +ROG  6SNU+ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line RangeProcessorCO Line Range
DK14 001~004 RCTUBA/BB 001~048
DK40i 001~012 RCTUC/D 001~144
RCTUA 001~016 RCTUE/F 001~200
Feature 
NumberCodeFeature 
DescriptionLine
LED...

System & Station
Program 78 – CO Line Special Ringing Assignments
Strata DK Programming 5/993-169
System & Station
Program 78 Overview
This program assigns ground/loop start CO lines:
©to ring over external page during night mode
©to be used with DISA features
©for direct access to IMDU/RMDS modem
©for Auto Attendant operation
Feature 1: Ring Over External Page During Night Mode
This program selects which ground/loop start CO lines will activate ringing over external paging 
facilities during the NIGHT...

System & Station
Program 79 – Door Phone Ringing
3-170Strata DK Programming 5/99
Program 79 – Door Phone Ringing
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:All LEDs are OFF
DP = Door Phone Program




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorPort RangeProcessorPort Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
FeatureLEDPorts
Muted ring to busy DKT/EKT20
19
18
17
16
15
14
13
Door phone 4C...

System & Station
Program 79 – Door Phone Ringing
Strata DK Programming 5/993-171
System & Station
Program 79 Overview
This program assigns the door phone ringing feature to ports.
LED 20: Muted Ring to Busy Electronic and Digital Telephone
If all electronic and digital telephones are busy and a door phone button is pressed, a muted ring 
tone can be sent to selected digital and electronic telephones, as defined with this program. (Only 
the lowest port in the appropriate ringing group will mute ring.)...

System & Station
Program *79 – Door Phone to [DN] Flashing Assignments
3-172Strata DK Programming 5/99
Program *79 – Door Phone to [DN] Flashing 
Assignments
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:No [DNs] assigned to ring for any door phone
Program *79 Overview
This program assigns door phones to ring Directory Number buttons ([PDNs]/[SDNs] [PhDNs]) 
when pressed and flash the [DN]’s LED. Each door phone can be assigned to flash one [DN]’s 
LED and the [DN] can be...

System & Station
Program 80 – EKT and DKT Ringing Tones (CO Line Calls)
Strata DK Programming 5/993-173
System & Station
Program 80 – EKT and DKT Ringing Tones (CO Line 
Calls)
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Tone 1 is assigned to all ports
Program 80 Overview
External speakers and all electronic and digital telephones are paged by dialing: [DN] + . The
$OO&DOO3DJH$&
 button is used to page all digital and electronic telephones only; external...

System & Station
Program *80 – Call Forward Station Ring Assignment
3-174Strata DK Programming 5/99
Program *80 – Call Forward Station Ring Assignment
Processor Type:All RCTUs with Release 3.2 and above
Program Type:Station
Initialized Default:LED 01, 04, and 07 ON for all lines
Program *80 Overview
Sets the Call Forward (CF) ringing assignment for ground/loop CO line calls. The station that 
controls CF should be the only station programmed to ring in the appropriate Ringing Assignment 
Programs...