Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 59 – Attendant Console Flexible Button Codes
Strata DK Programming 5/993-135
System & Station
Program 59 – Attendant Console Flexible Button 
Codes
Processor Type:RCTUBA/BB, RCTUC/D, RCTUE/F
Program Type:Station
Initialized Default:Given throughout this section




  6SNU   +ROG+ROG 6SNU+ROG 6SNU+ROG
Codes (Left Buttons 1~12) Codes (Right Buttons 1~12)
Split (295) Join Loop (239) Sup. Loop (296) Conf (297) Overflow (299) Night (439)
In-Emrg (261) In-DN...

System & Station
Program 59 – Attendant Console Flexible Button Codes
3-136Strata DK Programming 5/99
Program 59 Overview
Attendant Consoles have 24 flexible buttons (12 on left and 12 on the right side of the dial pad). 
This program is used to assign each button to an available function or options. Program 59 record 
sheets define the button options (and codes) available. 
Table 3-2 Required PC Attendant Console Button Codes
Button FunctionButton LabelsCodeNotes
Conference Conf 297 Starts conference...

System & Station
Program 59 – Attendant Console Flexible Button Codes
Strata DK Programming 5/993-137
System & Station
  
CO Line AppearanceCO line access of appearing calls. CO 
line ranges vary according to processor:
Line 1~48 001~048 RCTUBA/BB
Line 1~144 001~144 RCTUC/D
Line 1~200 001~200 RCTUE/F
Door Lock 0~Door Lock 4 
(DDCB/HDCB)DRLK 0~4 471~475Momentarily unlocks door (3 or 6 
seconds). The PC attendant activates 
these options when these buttons are 
assigned.
Emergency Page Access Emrg Page...

System & Station
Program 59 – Attendant Console Flexible Button Codes
3-138Strata DK Programming 5/99
Notes
lSee Program *15 for Tenant Group assignments.
lPicks up calls to telephones in any call pickup group to which the telephone is assigned in 
Program *31.
lAttendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is 
assigned to the console port number in Program 04. The console’s [DN] can have only one 
appearance.
lAttendant consoles cannot be equipped with [PDNs], [SDNs], or...

System & Station
Program 60-1 – SMDR Data Output Options
Strata DK Programming 5/993-139
System & Station
Program 60-1 – SMDR Data Output Options
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:LED 01 OFF
Program 60-1 Overview
Program 60-1 determines which information will be sent out the system SMDR port: System 
Account codes or Caller ID and/or ANI telephone numbers.
Turn LED 01 ON if received Caller ID and/or ANI information should be sent out the system 
SMDR port.
Turn...

System & Station
Program 60-2~7 – SMDR Output/Account Code Digit Length
3-140Strata DK Programming 5/99
Program 60-2~7 – SMDR Output/Account Code Digit 
Length
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:Item 2: 10 seconds
Item 3: SMDR output is enabled for answered incoming/outgoing calls 
Item 4: a 6-digit length is assigned to all Forced/Voluntary Account Codes
Item 7: 21 digits




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ItemDescriptionData
2...

System & Station
Program 60-2~7 – SMDR Output/Account Code Digit Length
Strata DK Programming 5/993-141
System & Station
Program 60-2-7 Overview
This program assigns the type of data to send to the Station Message Detail Report (SMDR).
Item 2: SMDR Threshold Time
The time that a call must be in progress before it will register with SMDR can be set to 1 or 10 
seconds.
Item 3: SMDR Output
System output to a Station Message Detail Recording (SMDR) device can include information for 
both incoming and...

System & Station
Program 60-8 – Call Forward External (Remote Change, Security) ID Code
3-142Strata DK Programming 5/99
Program 60-8 – Call Forward External (Remote 
Change, Security) ID Code
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:No digits
Program 60-8 Overview
Changes a telephone’s External Call Forward destination to [PDNs] but not [PhDNs] from outside 
the system. The person that wishes to change the destination must call into a DISA CO line, enter 
the...

System & Station
Program 69 – Verified Account Codes
Strata DK Programming 5/993-143
System & Station
Program 69 – Verified Account Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:Blank




  6SNU   +ROG  6SNU ‡‡‡ +ROG 6SNU+ROG 6SNU+ROG
ProcessorVA C NProcessorVACN
DK14 000~299 RCTUBA/BB 000~299
DK40i 000~299 RCTUC/D 000~299
RCTUA 000~299 RCTUE/F 000~499
NameVACN 
(3-digit)Verified Account Code (1~15 digits)
123456789101112131415
More Codes
Verified...

System & Station
Program 69 – Verified Account Codes
3-144Strata DK Programming 5/99
Program 69 Overview
Verified Account Codes (VACs) may be added, deleted, or changed with Program 69. Each 
Verified Account Code can be 1~15 digits long, but cannot exceed the Account Code length 
requirement set in Program 60-4. 
Account Codes may not conflict with (be the same as) emergency numbers in Program 44-91~93.
The following programs and options should be considered when establishing Verified Account 
Codes....