Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
Strata DK Programming 5/993-125
System & Station
Program *41-4 – T1 Span Receive Level Pad Assignments
Initialized Default:4 (-3dB)
NoteSee “Program *41-3 Overview”on Page 3-124 above for decibel levels.
Program *42 for DK424 – T1 Assignment Series (Part 2)
See “Program *42 – Clock Source”on Page 7-8.




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
SELECT = 4
Enter the RDTU being 
programmed (1~8).Enter one of the...

System & Station
Program *50 – Caller ID Circuit Assignments to CO Line PCBs
3-126Strata DK Programming 5/99
Program *50 – Caller ID Circuit Assignments to CO 
Line PCBs
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:No RCIU/RCIS circuits assigned
NoteThe Tip/Ring leads of RGLU, RCOU, RCOS, and PCOU Caller ID CO lines assigned to 
RCIU2/RCIS circuits must be bridged at the MDF. The Tip/Ring leads of TCOU and 
TCIU2 are bridged by the PCB connectors in the DK40i Base KSU....

System & Station
Program *50 – Caller ID Circuit Assignments to CO Line PCBs
Strata DK Programming 5/993-127
System & Station
Program *50 Overview
In DK40i and DK424, each analog ground/loop start CO line that receives Caller ID information 
from the local Central Office must be assigned to an RCIU or RCIS circuit using this program. 
In DK14, each CO line that receives Caller ID must be assigned an MLX-41 interface box circuit 
number. For information regarding the MLX-41, see Chapter 1 - DK14...

System & Station
Program *51 – Station Memory Allocation
3-128Strata DK Programming 5/99
Program *51 – Station Memory Allocation
for Storing Caller ID/ANI Numbers on Abandoned/
Unanswered Calls
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:No memory for all ports




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Station Logical 
Port NumberMemory Allocation 
(100 max each)Station Logical 
Port NumberMemory Allocation 
(100 max each)Station Logical 
Port...

System & Station
Program *51 – Station Memory Allocation
Strata DK Programming 5/993-129
System & Station
Program *51 Overview
Use this program to allocate “Abandon-Call-Memory” when any LCD telephone must store 
abandon call information for Caller ID, Ground/Loop start line and/or ANI, DID/Tie lines.
On direct incoming calls that ring on more than one telephone, the Caller ID, Ground/Loop start, 
line must also be assigned to the designated abandon call storage LCD telephone in Program 
52. 
If a CO...

System & Station
Program *52 – Caller ID/ANI Abandoned Call Number Station Owner Assignments
3-130Strata DK Programming 5/99
Program *52 – Caller ID/ANI Abandoned Call Number 
Station Owner Assignments
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:No station owners assigned




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line Range[PDN] Port RangeProcessorCO Line Range[PDN] Port Range
DK14 001~004 000~009 RCTUBA/BB 001~048 000~079
DK40i...

System & Station
Program *52 – Caller ID/ANI Abandoned Call Number Station Owner Assignments
Strata DK Programming 5/993-131
System & Station
Program *52 Overview
Use this program for any LCD telephone that must store abandon call information for Caller ID, 
Ground/Loop start lines and/or ANI, DID/Tie lines must be allocated “Abandon-Call-Memory” 
LCD telephones can be allocated memory to save up to 100 numbers in 10 number increments (see 
IDL totals). 
When Caller ID and ANI lines ring into the Strata...

System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
3-132Strata DK Programming 5/99
Program 58 – DK424 Attendant Console Series (Part 1)
Processor Type:RCTUBA/BB, RCTUC/D and RCTUE/F
Program Type:Station
Initialized Default:see each program
Program 58-1 – Attendant Console Overflow Timer
Initialized Default:32 seconds
Program 58-1 Overview
Incoming Line Calls (not recalls) to attendant consoles will overflow to a designated attendant 
console or station port (Program 58-5) if the call...

System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
Strata DK Programming 5/993-133
System & Station
Program 58-2 Overview
This program identifies in software the type of display connected to each console. It also enables 
you to set priorities for types of incoming calls. You can also enable Call Waiting tones.
LED 01: Attendant Console Display Type
Base units can connect to an Electroluminescent (EL) display (LED 01 ON) or Extended Graphics 
Adapter (EGA) Display (LED 01 OFF). 
LED...

System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
3-134Strata DK Programming 5/99
Program 58-5 – Attendant Console Overflow Destination Assignments
Initialized Default:  Blank
Program 58-5 Overview
When the attendant console has been placed in the Overflow mode (via the 
2YHUIORZ button), 
calls queue to be answered based on the predetermined FIFO or priority basis. If a call remains in 
queue for a period longer than the time period set for the Overflow Timer (set in Program 58-1),...