Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

System & Station
Program 97 – Printing Program Data through SMDR
Strata DK Programming 5/993-185
System & Station
Program 97 – Printing Program Data through SMDR
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:Prints out customer database
Program 97 Overview
Contents of each program can be sent to the SMDR port for a hard copy printout.




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
SELECT = Program Number
to be printed on SMDR.
To specify a range of...

System & Station
Program 97 – Printing Program Data through SMDR
3-186Strata DK Programming 5/99 

Strata DK Programming 5/994-1
Toll Restriction
Toll Restriction4
This chapter gives you an overview of the Toll Restriction feature and step-by-step instructions to 
fill in the Toll Restriction System Record Sheets for DK14, DK40i, and all RCTUs.
Toll Restriction Methods
Toll Restriction screens and selectively restricts outgoing calls using three different methods. Each 
type of restriction can be programmed for individual stations. Toll Restriction can also be enabled/
disabled for each outgoing line...

Toll Restriction
Toll Restriction Features
4-2Strata DK Programming 5/99
Station Priority Classes 1~8
Eight classes of Toll Restriction can be defined to assign different levels of priority to individual 
stations with RCTUC/D and RCTUE/F. 
Four classes are supported with DK14, DK40i, RCTUA, and RCTUBA/BB. 
Classes can be defined so each is progressively more restrictive by allowing or denying specific 
area or office codes, calls to long distance information, international calls, and operator assisted...

Toll Restriction
Completing the Toll Restriction System Record
Strata DK Programming 5/994-3
Toll Restriction
Completing the Toll Restriction System Record
The following instructions explain how to complete System Record Sheets used to program the 
Toll Restriction feature. They are arranged in the same order in which the tables appear in the Toll 
Restriction System Record Sheets. The following instructions are intended to give a concise 
general definition of the programming characteristics defined by...

Toll Restriction
Program 40 – Station CO Line Access
4-4Strata DK Programming 5/99
Program 40 – Station CO Line Access
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs ON for all CO lines (all stations can access all lines)




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line 
Range[PDN] Port 
RangeDISA PortProcessorCO Line 
Range[PDN] Port 
RangeDISA Port
DK14 001~004 000~009 10 RCTUBA/BB 001~048 000~079 089
DK40i 001~012...

Toll Restriction
Program 40 – Station CO Line Access
Strata DK Programming 5/994-5
Toll Restriction
Program 40 Overview
This program is used to allow or deny each station and/or DISA to use CO lines on a line by line 
basis. This applies to all analog and digital line types.
Any station can have access to as many lines as desired. Any station denied access (either to make 
a call or to answer a call) to a line cannot seize it by dialing either an access or pickup code or by 
using a CO line button. This...

Toll Restriction
Program 41 – Station Outgoing Call Restriction
4-6Strata DK Programming 5/99
Program 41 – Station Outgoing Call Restriction
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs OFF for all CO lines (all stations can access all lines)




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line 
Range[PDN] Port 
RangeDISA PortProcessorCO Line 
Range[PDN] Port 
RangeDISA Port
DK14 001~004 000~009 010 RCTUBA/BB 001~048...

Toll Restriction
Program 41 – Station Outgoing Call Restriction
Strata DK Programming 5/994-7
Toll Restriction
Program 41 Overview
Program 41 restricts each station (or Direct Inward System Access (DISA) CO line) from outgoing 
access to each line. If restricted, that station can still answer a ringing line or pick up a call on hold 
but cannot directly access a line for an outgoing call by pressing the line button or dialing the line 
access code. All Call Pickup functions operate normally. This does...

Toll Restriction
Program 42-0 – CO Line to PBX/Centrex Connection & Access Codes
4-8Strata DK Programming 5/99
Program 42-0 – CO Line to PBX/Centrex Connection & 
Access Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs OFF for all CO lines. Assigns no access codes to PBX groups.




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line RangeProcessorCO Line Range
DK14 001~004 RCTUBA/BB 001~048
DK40i 001~012 RCTUC/D 001~144...