Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

Toll Restriction
Program 45-2 – Toll Restriction Disable
Strata DK Programming 5/994-19
Toll Restriction
Program 45-2 – Toll Restriction Disable
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs OFF for all CO lines (all lines apply Toll Restriction)
Program 45-2 Overview
This program enables you to program lines be exempt from any Toll Restrictions defined in this 
section. Mark the exempt lines with an X on the record sheet. Toll Restrictions disabled in...

Toll Restriction
Program 45-3~6 – Special Common Carrier Numbers and Authorization Code Digit Length
4-20Strata DK Programming 5/99
Program 45-3~6 – Special Common Carrier Numbers 
and Authorization Code Digit Length
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns blank data to Items 3 and 5 and “00” data to Items 4 and 6. 
Program 45-3~6 Overview
This program notifies the system of how many digits to ignore before it applies Toll Restriction. It 
allows...

Toll Restriction
Program 45-3~6 – Special Common Carrier Numbers and Authorization Code Digit Length
Strata DK Programming 5/994-21
Toll Restriction
There are two elements Toll Restriction software must verify for a user to successfully complete 
long distance calling:
©The first five digits of the number dialed to access the long distance special common carrier 
(SPCC).
©The total number of digits allowed following the SPCC number.
Items 3 and 5
Enter the first five digits of the SPCC telephone number...

Toll Restriction
Program 45-8~9 – Toll Restriction Override Code
4-22Strata DK Programming 5/99
Program 45-8~9 – Toll Restriction Override Code
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Leaves code assignments blank
Program 45-8~9 Overview
This program enables selected stations in the system to alter the override code. These stations are 
defined by their users - specified in Program 30, Button/LED 09.
Two different codes can be dialed by any station user to...

Toll Restriction
Program *45-1 (1~4) – Toll Restriction for Office Codes
Strata DK Programming 5/994-23
Toll Restriction
Program *45-1 (1~4) – Toll Restriction for Office Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns 976 to first office code - blank for other three office codes
Program *45-1 Overview
This program enables you assign up to four office codes to be restricted within all area codes. This 
program only applies to telephone users which...

Toll Restriction
Program *45-2 (1~6) – LCR/Toll Restriction Bypass
4-24Strata DK Programming 5/99
Program *45-2 (1~6) – LCR/Toll Restriction Bypass
for Special Numbers that Do Not Begin with */#
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All data blank
Program *45-2 Overview
Use this program to allow special CO Area Codes and Centrex feature access codes or extension 
numbers to bypass toll restriction and route over the local LCR route - if using LCR. (Toll...

Toll Restriction
Program *45-2 (1~6) – LCR/Toll Restriction Bypass
Strata DK Programming 5/994-25
Toll Restriction
This will allow Centrex station numbers (1200#~1299# and 1300#~1399#) to de dialed - 
overriding Toll Restriction. The call will route out the local LCR route immediately after the # is 
dialed.
Use this record sheet to assign area codes in 10-digit dialing areas. If some non-toll numbers 
require 10-digit dialing: Area Code (AC) + Office Code (OC) + YYYY dialing (no digit “1” 
before the...

Toll Restriction
Program *45-3 (1~9) – LCR/Toll Restriction Bypass For Special Numbers that Begin with */#
4-26Strata DK Programming 5/99
Program *45-3 (1~9) – LCR/Toll Restriction Bypass For 
Special Numbers that Begin with */#
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All data blank
Program *45-3 Overview
Codes programmed in this record sheet are ignored by Toll Restriction and sent to the appropriate 
route if using LCR. Calls started with “*” or “#” are...

Toll Restriction
Program *45-3 (1~9) – LCR/Toll Restriction Bypass For Special Numbers that Begin with */#
Strata DK Programming 5/994-27
Toll Restriction
In the “Data = Digit String” part of the programming sequence, note that for two digit codes, such 
as 87, 82, 67, Key (LED Button 01) must be pressed to get to the following “Option=” section. For 
example, enter 

+ROG6SNUB ( _ = Press LED Button 01) + .
The Privacy Change option (0~4) enables the telephone user to override the setting...

Toll Restriction
Program *45-4 – Special Code Dialing Sequence with LCR
4-28Strata DK Programming 5/99
Program *45-4 – Special Code Dialing Sequence with 
LCR
Processor Type:DK424, all RCTUs (Release 4.1 and higher)
Program Type:Toll Restriction and LCR
Initialized Default:All LEDs OFF
Program *45-4 Overview
When LCR is used to make calls, this program determines if the codes set in Program *45-3 are 
sent before or after the digits that are set in the modified digits table (MDT). See Programs 55-1 
and...