Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

Toll Restriction
Program 42-0 – CO Line to PBX/Centrex Connection & Access Codes
Strata DK Programming 5/994-9
Toll Restriction
Program 42-0 Overview
Use this program to allow Centrex/PBX (after flash) features to operate. Do not use this program 
when the Centrex feature (assume 9) is used and the DK LCR is activated (see notes below).
The Strata DK System recognizes PBX/Centrex access codes via Programs 42-1~8. Program 42-0 
informs the software which lines are connected to a PBX or to Centrex. This...

Toll Restriction
Program 42-1~8 – PBX/Centrex Access Codes
4-10Strata DK Programming 5/99
Program 42-1~8 – PBX/Centrex Access Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns no access codes to PBX groups
Program 42-1~8 Overview
The Centrex access code(s) used to make out-of-centrex calls (usually 9) is entered in this table.
Use this program to allow correct Toll Restriction and Centrex/PBX transfer operation.
Do not use this program when using LCR...

Toll Restriction
Program 43 – 0 + Credit Card Dialing Option
Strata DK Programming 5/994-11
Toll Restriction
Program 43 – 0 + Credit Card Dialing Option
Processor Type:DK14, DK40i, All RCTUs
Processor Type:Toll Restriction
Initialized Default:All LEDS OFF




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line Range[PDN] Port RangeProcessorCO Line Range[PDN] Port Range
DK14 001~004 000~009 RCTUBA/BB 001~048 000~079
DK40i 001~012 000~027 RCTUC/D 001~144 000~239
RCTUA 001~016...

Toll Restriction
Program 43 – 0 + Credit Card Dialing Option
4-12Strata DK Programming 5/99
Program 43 Overview
This program enables selected station users to bypass their normal Toll Restriction assignments by 
dialing “0” immediately after seizing a CO line. Both the station and the line must be enabled for 
this feature with this program.
After seizing the line, the station user is required to dial a specific number of digits, which includes 
the leading 0. This digit-length requirement forces the...

Toll Restriction
Program 44-1~8 – Toll Restriction/Traveling Class Override Codes
Strata DK Programming 5/994-13
Toll Restriction
Program 44-1~8 – Toll Restriction/Traveling Class 
Override Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All Classes Blank (no code)
Program 44-1~8 Overview
This program enables you to assign a code for each of the Toll Restriction classes established in 
Program 46. If one of these codes is entered at a station, the station...

Toll Restriction
Program 44-91~93 – Emergency Bypass of Forced/Verified Account Codes
4-14Strata DK Programming 5/99
Program 44-91~93 – Emergency Bypass of Forced/
Verified Account Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Code 91 = 911, Codes 92 and 93 are blank
Program 44-91~93 Overview
This program exempts as many as three special numbers, each up to four digits (such as the 
emergency 911 number), from Verified Account Code dialing restrictions....

Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
Strata DK Programming 5/994-15
Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns Dial Plan 7 to the system (current North American Numbering Plan)
Where:
Program 45-1 Overview
This program enables you to define a dial plan for the Toll Restriction software to recognize the 
typical dialing sequence of long distance/local calls made...

Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
4-16Strata DK Programming 5/99
lThe Strata DK System automatically restricts direct dialing of 10XXX+1 and 10XXXXX+1 
access codes to any station that is toll restricted. These codes are allowed in system speed dial 
and LCR modified digit tables. This is necessary to control Long-Distance-Carrier access. 
10XXX+0 and 10XXXXX+0 are allowed/denied depending on the stations class and Program 
46 (10~80) button/LED 01 assignment.
Pre-January...

Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
Strata DK Programming 5/994-17
Toll Restriction
Plan 3
©Plan 3 is 1+AC+NXX/NXX. Use this plan where a user places a long distance call to a 
destination outside the area code by dialing a 1 before dialing the area code. The user places a 
long distance call to a destination in the same area code by simply dialing the number, without 
a 1 in front. The office codes are interchangeable. The system differentiates between them 
whenever it sees...

Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
4-18Strata DK Programming 5/99
Plan 7 - (10XXX)+1+NXX+NXX/NXX
The Strata DK systems in this Programming Manual default to this plan. Used when dialing 1 
before the long distance number. Call is placed to a destination outside the area code by dialing a 1 
before dialing the area code.
The user places a local code plus distance call to a destination in the same area code by simply 
dialing the number, without a 1 in front. The area and office...