Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

Least Cost Routing
Program 50-6 – LCR Dial 0 (Zero) Time-out
Strata DK Programming 5/995-9
Least Cost Routing
Program 50-6 – LCR Dial 0 (Zero) Time-out
Processor Type:DK14, DK40i, All RCTUs
Program Type:Least Cost Routing
Initialized Default:Assigns an LCR Dial Zero Time-out value of 06
Program 50-6 Overview
Enter the maximum number of seconds LCR waits for a user to dial additional digits after a 0, 
before it routes the call to an operator for assistance. LCR waits this number of seconds to receive...

Least Cost Routing
Program 51 – LCR Area Codes
5-10Strata DK Programming 5/99
Program 51 – LCR Area Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Least Cost Routing
Initialized Default:Leaves Tables 01~15 blank; all codes (000~999) initialized to the plan - legend below




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorLCR Plan NumberLCR Plan DefaultProcessorLCR Plan NumberLCR Plan Default
DK14 01~08 08 RCTUBA/BB 01~08 08
DK40i 01~08 08 RCTUC/D 01~16 16
RCTUA 01~08 08...

Least Cost Routing
Program 51 – LCR Area Codes
Strata DK Programming 5/995-11
Least Cost Routing
Program 51 Overview
Use Program 51 to define which area code calls are placed over which LCR Plan Number (01~08 
or 01~16). Therefore, calls made to all area codes are routed over route definitions defined in 
Program 54 for Plan 08 or 16, following the time schedule specified by Program 53 for Plan 08 or 
16 (unless other assignments are made in plans 1~15). 
Every route plan can be assigned to define a set...

Least Cost Routing
Program 52 – LCR Office Code Exceptions for Specified Area Code
5-12Strata DK Programming 5/99
Program 52 – LCR Office Code Exceptions for 
Specified Area Code
Processor Type:DK14, DK40i, All RCTUs
Program Type:Least Cost Routing
Initialized Default:Leaves all office code tables blank and all tables assigned to LCR Plan (see legend 
below)




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Action Code FunctionAction CodesDATA =
Assign Exception Table to LCR Plan 0 (LCR...

Least Cost Routing
Program 52 – LCR Office Code Exceptions for Specified Area Code
Strata DK Programming 5/995-13
Least Cost Routing
Program 52 Overview
This Office Code exception table enables the user the flexibility of routing specific office codes 
through a different call plan than other office codes used with that area code.
©Any number of exception code tables can be assigned to each route plan, although each 
exception table can only be used once system-wide.
©Every route plan can be assigned to...

Least Cost Routing
Program 53 – LCR Schedule Assignments for LCR Plans
5-14Strata DK Programming 5/99
Program 53 – LCR Schedule Assignments for LCR 
Plans
Processor Type:DK14, DK40i, All RCTUs
Program Type:Least Cost Routing
Initialized Default:Assigns starting time as 0000 and Route Definitions as blank for all schedules




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorProgram 56
LCR Station GroupsProgram 54 Route 
Definition #ProcessorProgram 56
LCR Station GroupsProgram 54...

Least Cost Routing
Program 53 – LCR Schedule Assignments for LCR Plans
Strata DK Programming 5/995-15
Least Cost Routing
Program 53 Overview
This program assigns up to three time schedules to each plan. Each time schedule consists of four 
or six different route definition choices (defined in Program 54) available to the eight station 
groups (defined in Program 56). It may be helpful to complete Program 54 portions of the plans 
and Program 56 before proceeding.
If Schedules 1 & 2 start at the same...

Least Cost Routing
Program 53 – LCR Schedule Assignments for LCR Plans
5-16Strata DK Programming 5/99
LCR
Plan
01~16Sched.
1~3
Program 56
LCR Station 
Group
(see legend 
above)Program 54
Route Definition #
 (see legend above)
LCR
Plan
01~16Sched.
1~3
Program 56
LCR Station 
Group
(see legend 
above)Program 54
Route Definition #
 (see legend above)
1st
Pick2nd 
Pick3rd 
Pick4th 
Pick1st
Pick2nd 
Pick3rd 
Pick4th 
Pick
01 1 1 1       Guest Room with restricted calling
21
        Guest Room...

Least Cost Routing
Program 54 – LCR Route Definition Tables
Strata DK Programming 5/995-17
Least Cost Routing
Program 54 – LCR Route Definition Tables
Processor Type:DK14, DK40i, All RCTUs
Program Type:Least Cost Routing
Initialized Default:0101
Program 54 Overview
Program 54 defines different ways of routing calls for each of the LCR plans. Define each route by 
selecting and entering:




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorRoute 
Definition #Program 16 
CO Line...

Least Cost Routing
Program 54 – LCR Route Definition Tables
5-18Strata DK Programming 5/99
Route Definition Number
Route definitions define the CO line group and modified digit tables used for each LCR Plan. See 
the legend for the number of route definition numbers for your processor.
CO Line Group (assigned in Program 16)
Each line group represents a type of service, e.g., special common carrier, foreign exchange, local 
line group, etc. Program 40 denies incoming and outgoing line access to stations,...