Toshiba Estudio 170f Manual

59
Receive Interval Setting Operation
Press:
MENU++++
Display the
RECEIVE INTERVAL
Menu
1
Enter the interval value (0 to
14) in minutes.Then press:
Enter the Receive
Interval
2
Displayed for 2 seconds
Returns to display the SETUP
menu screen.After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
Select Another
SETUP Item, or ......

60ECM (Error Correction Mode) is
an internationally-recognized
error correction system. It en-
ables error free communica-
tions by automatically re-send-
ing any portion of the document
affected by phone line noise or
distortion.
NOTES:
• Default ECM setting is
ON.
• Both the sender and the
receiver must have the
ECM feature to perform
ECM communications.
• This setting cannot be
changed if a document
is stored in memory. Re-
sidual memory must be
100%.Press:
MENU++++
Display the SET
ECM Menu
1
ECM...

61
Sort Copy Setting
Press:
MENU++++
When copying documents, the SORT function may be selected.
This function will sort multiple page copies into sets of correct-
order pages.
This setting establishes the default for the Sort Copy function.
Sort copy may, also, be set manually at the time the copy opera-
tion is performed.
Output Examples of Printed Copies
With SORT Function ON With SORT Function OFF
NOTES:
• The pages are automati-
cally sorted.
• Requires enough memory
for the entire multi-page...

62
Press:
MENU++++
Enter the interval value (1 to
15) in minutes.Then press:The following screen is dis-
played.
Enter the redial counter value
(0 to 1).Then press:NOTE:When 0 is set, the Auto-
matic Redialing does not
function.
The following screen is dis-
played.
If the destination facsimile you
called is busy, your facsimile
will automatically redial the
number up to the number of at-
tempts set by this procedure.
In addition, your e-
STUDIO170F will try to redial
every 1 minute by default. If...

63
Press:
MENU++++
Select the desired Reception
Mode.
(for AUTO RECEIVE)
If AUTO RECEIVE is selected,
the following will be displayed.
Reception Mode Default Setting
The e-STUDIO170F has four
reception modes and the re-
ceiving function differs accord-
ing to the selected mode.
• AUTO RECEIVE
• FAX/TAD
• TEL/FAX
• MANUAL RECEIVE
AUTO RECEIVE (FAX):
If you use the unit as a fac-
simile most of the time, you
should select this mode. When
the unit receives a call, the unit
enters the automatic fax recep-...

64Enter the desired number of
rings (1 to 10) before the fac-
simile will answer the incoming
call in Auto Receive mode.When the desired ring count is
displayed on the LCD, press:
Enter the FAX Ring
Delay
3
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 6.
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Set-
ting mode and return to the...

65
Press:
MENU++++
This function allows automatic
reduction of the recording im-
age when making copies. The
default setting is OFF.
NOTES:
• If this function is en-
abled, documents long-
er than the effective
printable area (see page
87) will be reduced by
95, 90, 86, 83, 80 or
73% depending on the
document length.
• If this function is dis-
abled, documents more
than 10 mm longer than
the effective printable
area will be split onto
two pages. No image
will be discarded.
The excess portion of a...

66BASIC FUNCTIONS - AUTOMATIC TELEPHONE DIALINGAbbreviated Dialer Registration
Once registered, 38 One Touch
and 150 Abbreviated Dial Num-
bers will allow you to send
documents or make telephone
calls to 188 frequently called
numbers without manually dial-
ing the entire number.
•Abbreviated Dial Numbers
This machine can store up
to 150 16-digit facsimile
numbers and associated 20-
character location ID
names. This information is
stored into Abbreviated Dial
Numbers labeled from 001
to 999.
•One Touch...

67
Abbreviated Dialer Registration - continued
To delete the contents stored
in the Abbreviated Dial Num-
ber, press:
(to DELETE)To change the number or Lo-
cation ID (remote facsimile
name) currently assigned to an
existing Abbreviated Dial Num-
ber, press:
(to MODIFY)
The facsimile number currently
assigned is displayed on the
bottom row.
Skip to Step 6.If you do not wish to change
the Abbreviated Dial Number
information, press:
(to RETAIN)
Return to Step 3 to select a dif-
ferent Abbreviated Dial...

68
Alternate Numbers are optional.
If the remote location does not
have two or more facsimile
units in the same area, you can
leave this entry blank. (See
page 66 for more information.)
Enter the Alternate Facsimile
Number.Then press:
Enter an Alternate
Number (Optional)
7
The telephone number is dis-
played on the bottom row of the
LCD display as you enter it.
Confirm that the number is cor-
rect.
Enter the Telephone
Number - continued
6Abbreviated Dialer Registration - continued
Then press:  
Enter the...