Toshiba Estudio 170f Manual

39
Initial Setting Summary
This facsimile has several user
initial settings.
For your convenience, a quick
reference summary of all user
initial settings is shown on the
right.
Each of these initial settings is
discussed in detail throughout
the remainder of this section.
Use the following procedures
to access one or more of these
initial settings.Press 
MENU
. The initial
Menu Screen displays.Press 
MENU
 or 
 until the desired Initial Setting is displayed or enter the desired Initial
Setting 1 through...

40Language Selection
You can select the language
used on the LCD display and
all reports printed by your fac-
simile.  English, Francais,
Deutsch, Italiano, Nederlands,
Svenska, Suomi, Norsk,
Dansk, Espanol and Portugues
are available.
To display the SETUP menu,
press:
MENU+
Select the desired language.
 + 
(for ENGLISH)
 + 
(for FRANCAIS)
 + 
(for DEUTSCH)
 + 
(for ITALIANO)
 + 
(for NEDERLANDS)
 + 
(for SVENSKA)
 + 
(for SUOMI)
 + 
(for NORSK)
 + 
(for DANSK)
 + 
(for ESPANOL) Display
Display the...

41
Date and Time Setting
This facsimile displays the cur-
rent date and time when in the
Standby Mode. It also uses
this time for maintaining inter-
nal list and reports. Follow this
procedure to set the time and
date.
To display the SETUP menu,
press:
MENU+
Display the DATE &
TIME Menu
1
Move the cursor to the desired
position using the following
keys.
 or 
Enter the date.When the correct date is en-
tered, press:
Select the date format for dis-
play and print.(for Month/Day/Year 4-digit)(for...

42Date and Time Setting - continued
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or
press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
Select Another
SETUP Item, or ...
7
Select the time format.
(for 24-hour format)Select the Time
Format
5
Move the cursor to the desired
position using the following
keys.
 or 
Enter the time.Change the AM/PM designa-
tion by pressing the...

43
In compliance with FCC regula-
tions (see page 1), this fac-
simile places your company’s
name, facsimile telephone
number and date & time on top
of all transmitted documents.
This feature enables remote
parties to easily identify your
documents and time of trans-
mission.
To display the SETUP menu,
press:
MENU+
Enter your user ID (company
name) using the Dial Keypad.
You can use up to 40 charac-
ters.
For more information on select-
ing characters, see page 35,
Character Entry.
When your ID name is...

44After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or
press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
Select Another
SETUP Item, or ...
5Terminal ID Setting - continued 

45
Dial Type Setting
There are two types of dialing
modes: DP [Dial Pulse (Ro-
tary)] and MF [Multi-Frequency
(touch tone)]. If your telephone
emits tones when you are dial-
ing, this usually indicates that
you have a MF type line and no
adjustment is required. Other-
wise, you will have to select
the appropriate setting.
To display the SETUP menu,
press:
MENU+
Select your dial line type.
(for Multi-Frequency type)
default
(for Dial Pulse type)
After selecting the dial type,
the following will be...

46This facsimile has many user
adjustable settings.
Each of these configuration
settings is discussed in detail
throughout the remainder of
this section.
Use the following procedures to
access one or more of these
configuration settings.Press 
MENU
. The initial
Menu Screen displays. Press 
 or 
MENU
 until the desired Configuration Setting is displayed or enter the desir\
ed
Configuration Setting 01 through 11 from the list below. The detailed co\
nfiguration procedure for each
setting is shown in...

4747
The bell ringer volume can be
adjusted using the following
procedure.
Press:
MENU++++++
The current setting is displayed
on the bottom row.After completing this Configura-
tion Setting, you may continue
to select other volume settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Setting
mode and return to the Standby
Mode.
Enter the desired volume value
(1 to 8; 1 for maximum, 7 for
minimum, 8 for off).
or
Select the desired volume
value, using the...

48The alarm tone volume can be
adjusted using the following
procedure.
Press:
MENU++++++
The current setting is displayed
on the bottom row.After completing this Configura-
tion Setting, you may continue
to select other volume settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Setting
mode and return to the Standby
Mode.
Enter the desired volume value
(1 to 8; 1 for maximum, 7 for
minimum, 8 for off).
or
Select the desired volume
value, using the...