Toshiba Estudio 170f Manual

19
Fit the tabs of the Document
Support into the slots on the
top side of the unit.
• Do not place heavy objects
on the Document Support or
apply strong force.
NOTE:
It may be necessary to gen-
tly bow the base of the sup-
port toward you as you
place the support into posi-
tion.Document SupportDocument Support
Installation
Hold the Front Cover by the
grips on both sides of its upper
part and pull it down to open it.
NOTE:
Do not pull the Front Cover
too strongly when opening
it.Open the Front Cover
Fit...

20
Bypass TrayPlace the Bypass Tray on the
Recording Paper Tray.
• Do not place heavy objects
on the Bypass Tray or apply
strong force. Place the hooks of the Record-
ing Paper Tray into the guides
on the front side of the unit and
press into position.
• Do not place heavy objects
on the Recording Paper
Tray or apply strong force.
Recording Paper Tray
Installation
Bypass Tray Installation
Recording Paper Tray 

21
Remove the Bypass Tray from
Recording Paper Tray.Pull down the front plate of the
Recording Paper Tray, and
then fully extend the Paper
Guide with the hook on the
right. About Recording Paper:
• Use only recommended pa-
per brands to optimize your
facsimile performance. Con-
tact your authorized TOSHI-
BA dealer for more informa-
tion.
• Remove the recording paper
when storing or relocating
your facsimile.
• Avoid using damaged,
folded or misaligned record-
ing paper. Use of damaged
paper could cause...

22Place the recording paper
stack into the tray.
NOTES:
• Do not exceed the upper
stack limit line as this may
cause paper mis-feeds.
• Do not add paper on top of
the paper already in the ma-
chine.Adjust the Paper Guides to fit
the size of the Recording Pa-
per.
Push up the front plate of the
Recording Paper Tray to close
it.
Install the
Recording Paper
4
Replace the Bypass Tray.
CAUTION:
Do not place heavy objects
on the Document Exit Tray
or apply strong force.
Press:
MENU++++
The menu below...

23
Return to the
Standby Mode
9Press 
STOP
 to return to the
Standby Mode.
Recording Paper Installation (Recording Paper Tray) - continued 

24Open the Paper Guides.
Open the Paper
Guides
1Recording Paper Installation (Bypass Tray)
Insert a one sheet of paper on
the Bypass Tray.
CAUTION:
Do not insert more than one
sheet of paper on the By-
pass Tray.
It will cause a paper jam.
Adjust the Paper
Guides
3
Insert the Recording
Paper
2
Adjust the Paper Guides so
that both sides of the paper are
secure.
NOTE:
The single sheet of paper in the Bypass Tray will be fed in-
stead of the paper in the Recording Paper Tray. If the machine
is equipped with...

25
Remove the Optional Record-
ing Paper Tray.Remove the Optional Tray
Cover.
Remove the
Optional Tray Cover
2
Prepare new recording paper
sheets by holding both ends
and flexing several times.
This will separate the sheets
and provide optimum feeding.
Align the stack so that all four
corners are neatly aligned.
Be sure to load the recording
paper in accordance with any
paper manufacturer’s printing
side instruction. Some papers
have a preferred image side.
This image side should be
placed face up in the...

26Replace the Optional Paper
Tray Cover.Insert the Optional Recording
Paper Tray all the way into the
machine.
NOTE:
As the tray is inserted, lis-
ten for the sound of the pa-
per pressure plate moving
up into position.
Recording Paper Installation (Optional Recording Paper Tray) - continuedReplace the Optional
Tray Cover
6
Insert the Optional
Recording Paper Tray
7
Press:
MENU++++
The menu below displays:
Display the Paper
Size Menu
8
Select the paper size of the
Recording Paper Tray.
To select letter...

27
Return to the
Standby Mode
11Press 
STOP
 to return to the
Standby Mode.
Recording Paper Installation (Optional Recording Paper Tray) - continued 

28
Hold the Front Cover by the
grips on both sides of its upper
part and pull it down to open it.
NOTE:
Do not pull the Front Cover
too strongly when opening
it.NOTE:
Do not touch the Develop-
ment Roller of the Toner
Cartridge. The image quality
could be degraded.
Open the Front
Cover
1
Drum Unit and Toner Cartridge Installation
Mix the Toner by shaking the
Toner Cartridge back and forth.
NOTE:
Avoid touching the toner to
your clothing since toner
cannot be removed easily.
If the toner sticks to your...