Toshiba Estudio 170f Manual

29
Drum Unit and Toner Cartridge Installation - continued
Press up the Front Cover until
it clicks to attach securely.
Close the Front
Cover
6
Install the Process Unit along
the Guide in the machine.
Make sure the Process Unit is
inserted inside the machine as
far as it will go.
NOTE:
Pressing in the Process
Unit forcibly could damage
the machine.
CAUTION:
Hold the Process Unit by
the green handle.
Install the Process
Unit
5 

30Toner Cartridge ReplacementReplacement Toner Kits for your TOSHIBA facsimile include a
Toner Cartridge.
Your TOSHIBA facsimile has been designed to display a two
stage alert to replace Toner once it has been depleted.
The first stage is a “TONER LOW” warning that alerts you that the
Toner is low and should be replaced at your earliest convenience.
The unit will continue to receive and print facsimile messages dur-
ing this stage.
The second stage is a “TONER EMPTY” notice. When this mes-
sage is...

31
Toner Cartridge Replacement - continued
Install the Process Unit along
the Guide in the machine.
Make sure the Process Unit is
inserted inside the machine as
far as it will go.
NOTE:
Pressing in the Process
Unit forcibly could damage
the machine.
CAUTION:
Always hold the Process
Unit by the green handle.
Close the Front
Cover
8Press up the Front Cover until
it clicks to attach securely.
Take out the new Toner Car-
tridge from its shipping carton.
Mix the Toner by shaking the
new Toner Cartridge back...

32Drum Unit ReplacementReplacement Drum Kits for
your TOSHIBA facsimile in-
clude a Drum Unit.
Your TOSHIBA facsimile has
been designed to display a two-
stage alert to replace the Drum
Unit once it has been depleted.
The first stage is a “DRUM
UNIT WARNING” notice. This
message is displayed when the
remaining drum life reaches
4,000 sheets. When this mes-
sage is displayed, we recom-
mend ordering and replacing
the drum at your convenience.
(If “auto supply order” (page
236) is set, you don’t need to...

33
Take the new Drum Unit from
its shipping carton.
Match the colored parts in the
lower area of the new Drum
Unit with the same colored
parts in the lower area of the
Toner Cartridge.
Attach the new
Drum Unit to the
Toner Cartridge
4
Install the Process Unit along
the Guide in the machine.
Make sure the Process Unit is
inside the machine as far as it
will go.
NOTE:
Pressing in the Process
Unit forcibly could damage
the machine.
CAUTION:
Always hold the Process
Unit by the green handle.
Press up the...

34Drum Unit Replacement - continuedReturn to the
Standby Mode
9Press 
STOP
 to return to the
Standby Mode. 

35
This section provides several
quick start programming steps
to prepare your new facsimile
for immediate use.
These procedures are a simple
version of the detailed proce-
dures listed in the manual.
Next to each procedure head-
ing is a convenient page num-
ber reference for the detailed
procedure. Should you have
any difficulty with these simple
procedures, refer to the pages
listed for more information.
It is highly recommended that
you take the time to read
through this manual to get the
most from...

36- USER INTERFACE OPERATIONMenu Operation
Various functions of this fac-
simile can be used by selecting
menu items displayed in the
LCD window. Performing opera-
tions or settings by selecting
menu items is called “Menu
Operation.” The menus use a
multi-layered structure.
Starting Menu Operation:
When the facsimile is in the
Standby Mode, press 
MENU
to start Menu Operation.
(In the Standby Mode, the dis-
play shows the date, time and
residual memory % on the first
row and the receive mode on
the...

37
Character Entry
When programming and regis-
tering the Autodialer numbers
or names, you will need to en-
ter alphanumeric characters.
This section helps you under-
stand how to easily enter these
characters.
Keys Used in Character Entry
[INSERT] Key
Inserts characters before the selected
(underlined) character.
[DELETE] Key
Deletes the selected (underlined) charac-
ter.
[ 
 ] Key
Moves the cursor to the right. If pressed
without entering a character, it inserts a
space.
[  ] Key
Moves the cursor to...

38Character Entry - continuedCharacter Correction
Replacing Characters
Using 
 / 
, position the cursor under the char-
acter to be corrected.
Input the correct character (“R” in this example) by
pressing  3 times. Press 
 to save your
change.
  Deleting Characters
Using 
 / 
, position the cursor under the char-
acter to be deleted.
Delete the character by pressing 
DELETE
. Press 
 to
save your change.
  Inserting Characters
Using 
 / 
, position the cursor under the point
of insertion and press...