Toshiba Estudio 170f Manual

89
Select the number of copies
(max. 99).When all settings are complete,
press:
START
NOTE:
If the Sort option is se-
lected, the document will be
scanned into memory first.
Enter the Number of
Copies
8
Copying Procedure - continuedSelect the Paper
Size of the Bypass
Tray
6
Select the Thick
Paper Option
7
Select the paper size of the
Bypass Tray.
To select the A4 size, press:To select the Letter size,
press:To select the Legal size, press:
Select the thick paper mode.
To enable the thick paper
mode,...

90Your TOSHIBA facsimile pro-
vides various dialing methods.
One Touch Dialing
Dials remote locations with
the touch of a single key.
See page 72 for program-
ming.
Abbreviated Dialing
Dials remote locations using
an abbreviated dial number
from 001 to 999. See page
66 for programming.
Alphabet Dialing
Allows a location selection
using an alphabetic index
search of the Location IDs
programmed into One
Touch and Abbreviated Dial-
ing Directories.
Keypad Dialing
Accepts unregistered tele-
phone number...

91
When the correct number is
displayed, press:
START
The Abbreviated Dial Number
and the name of the party will
appear on the LCD display for
about 2 seconds.
Your facsimile will automatical-
ly start scanning the document
into memory (if enabled). While
scanning, the facsimile dials,
connects, and starts transmis-
sion.
Once an Abbreviated Dial Num-
ber is programmed with a valid
remote facsimile location, that
location can be accessed by
recalling the corresponding Ab-
breviated Dial Number.
The...

92“Alphabet Dialing” is used to
dial the desired party by
searching for the name of the
registered Location ID name in
the Abbreviated Dial, One
Touch Dial and Group Dial List.
The document must be loaded
and the resolution and contrast
set before a transmission using
Alphabet Dialing (see pages 84
and 85).Press:
SPEED DIALALPHA+
Press the key on the dial key-
pad which corresponds to the
name.
Example:
To find the location named
“LONDON OFFICE”:
Press 
 3 times to display
the screen for names beginning...

93
If you have not preset the tele-
phone number of the destina-
tion facsimile to an Abbrevi-
ated Dial Number or One
Touch key, you can dial your
destination by entering the
number from the Dial Keypad.
The document must be loaded
and the resolution and contrast
set before a transmission using
Keypad Dialing. (See pages 84
and 85.)Enter the facsimile number of
the desired party.
NOTE:
When an incorrect number
is entered, use 
 to delete
preceding digits, or press
STOP
 once to start over
from the...

94
JAN-31 09:43 AM  70%
        AUTO RECEIVESCANNING DOC.   100%
FILE NBR =       123
A Memory Transmission first scans and stores the document into memory prior to
a transmission to a remote facsimile(s).
Memory Transmission is automatically initiated with any of the following dialing
methods.
•  One Touch Dialing (See page 90)
•  Abbreviated Dialing (See page 91)
•  Alphabet Dialing (See page 92)
•  Keypad Dialing (See page 93)
You may reserve a transmission even when other Memory Communications are...

95
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).Dial the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
... See page 93
• Press 
STOP
 if a dialing er-
ror occurs.
Example of screen displayed
while a number is entered by
Keypad Dialing:The facsimile starts...

96
This procedure will discuss Di-
rect Transmission when se-
lected as the default setting or
when Residual Memory has
been depleted.
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).Dial the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
... See page 93
•...

97
Document
Transmission
5The transmission starts as the
document is scanned, the
screen below is displayed.When the communication is
complete, BUSY lamp turns
off and the facsimile returns to
the Standby Mode.
Complete the
Transmission
6
Direct Transmission - continuedDirect Transmission as a Default Setting - continuedTRANSMIT        P001
+81 559 761234
JAN-31 09:43 AM 100%
        AUTO RECEIVE 

98
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).
Even if the Memory Transmis-
sion Mode is selected as the
default, you may desire to
transmit a specific document
directly from the Automatic
Document Feeder.
This is useful when the docu-
ment consists of many pages
or when the residual memory is
too small to store the docu-
ment data.Select the desired function key
on the operation panel.
Press:
DIRECT SEND
Select...