Toshiba Estudio 170f Manual

99
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).
Press:
MONITOR
The facsimile is connected to
the telephone line and the dial
tone is heard through the
speaker.
You can send your documents
with On-hook Dialing using the
monitor speaker to confirm the
answering tone from the re-
mote party’s facsimile.
Dial the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
......

100
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).
Pick up the handset of the fac-
simile.
The unit is connected to the
telephone line and you hear
the dial tone through the
speaker of the handset.
Dial the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
......

101
Direct Transmission - continuedOff-hook Transmission (Optional Handset Dialing) - continued
When you hear the answering
tone, press 
START
. If the re-
mote party answers the phone,
you can inform the remote
party that you wish to send a
document.
Upon hearing the facsimile
tone, press:
START
Then replace the handset.
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
Press the START
Key
4
JAN-31 09:43 AM 100%
        AUTO RECEIVE 

102
Load the document face down
in the Document Support (see
page 83).
Adjust the resolution and con-
trast if desired (see pages 84
and 85).
Pick up the handset of the Ex-
ternal Telephone connected to
the “TEL” connector of the fac-
simile.
The External Telephone is con-
nected to the telephone line via
the facsimile, and the dial tone
is heard through the speaker of
the External Telephone.
The display on the facsimile
shows “EXTERNAL OFF
HOOK” on the LCD display.
Dial the facsimile number of
the...

103
This function enables you to
redial the number last dialed
using this facsimile to transmit
a document.
WARNING:
If you press 
STOP
, the
facsimile will clear the fac-
simile number registered
and lose the manual redial
capability.
NOTE:
This feature will not func-
tion with numbers dialed
using the optional handset
or an external telephone.
To enter the On-hook Dialing
(Monitor Speaker Dialing)
mode, press:
MONITOR
Press:
REDIAL
PAUSE
The last number dialed is dis-
played. The display varies de-...

104
Redialing - continued
This function enables you to
transmit a document after se-
lecting it from the jobs reserved
in memory waiting to be
redialed.
NOTE:
If you are using Department
Codes, the initiating Depart-
ment Code must match for
this operation to work.
Wait 5 seconds or press any
key on the Operation Panel ex-
cept 
STOP
 to display the
screen on the right.
Screen Index:
1st line . . . File Number
2nd line . . . Destination  of
redialing
Locate the screen of the de-
sired job using the...

105
 - RECEIVING“AUTO RECEIVE” is the ability of the facsimile to receive docu-
ments sent to your facsimile automatically.
The facsimile starts to receive a document after a pre-selected
number of rings. You can change the ringer count (see page 63).
NOTE:
A ring delay can be selected should you wish to  speak to the
calling party before receiving a facsimile.
If you do not pick up the handset within the selected delay pe-
riod, the facsimile will automatically answer the call and at-
tempt to receive a...

106This mode is used when the line is used for both facsimile and telephone.
The facsimile automatically determines whether an incoming call is for facsimile or telephone. When
the call is for telephone, the ringer will ring according to the value set for the call time. When the call
is for facsimile, the machine will automatically start receiving the document.
If the other party is sending a document, the facsimile automatically receives the document. If the
other party is making a phone call, the...

107
The Automatic Reception
Mode (AUTO RECEIVE) is nor-
mally selected. You can
change the reception mode by
pressing the 
AUTO
 key.
Refer to Reception Mode se-
lection on page 63.
Press:AUTO
This facsimile can use Letter and Legal size paper.  The received document is recorded (printed)
within the Effective Recording Area of the paper.
NOTES:
• If the received document is equal to or shorter than the recording area of the paper, the re-
ceived document is printed at its actual size.
• If the received...

108If the optional handset is in-
stalled, you can make a tele-
phone call using your e-
STUDIO170F just like an ordi-
nary telephone.
Without loading any document
on the Document Support,
press:
MONITOR
You hear the dial tone through
the speaker.
Pick up the handset to talk.
NOTE:
If you do not pick up the
handset in 1 minute after
dialing, the line will be auto-
matically disconnected.
When you finish talking, return
the handset to the handset
cradle.
The display returns to the
Standby Mode. Enter the...