TiE Onyx 2, 3, 4, 5 Service And Programming Manual

E- EXTENSIONS
ED- TRUNK CONTROL, ACCESS CONTROL
Related
l
l
Central Office Calls. Placing
E- Extensions, ES- Line 
 Options,  Access to Outbound Lines 
If enabled, user can press a line key to place a call (if also allowed by ED
programming).
E- Extensions, ES- Line Access Options, Allow Line Code Dial-Up 
 If
enabled, user can dial a trunk access code (e.g., 801) to access trunks (if also
allowed by ED programming).
E- Extensions, ES- Line Access Options, Access to Groups 90-95 (not on
key systems) 
 If...

E- EXTENSIONS
ED- TRUNK CONTROL, ACCESS CONTROL
Related
Programming
(Cont’d)
l
l
l
Night Answer, Universal Night 
E- Trunks,  Circuit Type  The unused trunk circuit assigned in QM
below must have circuit type X.
 Music and Relay Control. Ext Page/Night Audible Line Number  In
the large systems, indicate the unused trunk circuit that will broadcast night
audible. In VS, enter Y. An incoming call will activate ringing on the night
audible port if:
 The ringing trunk is terminated (in E9) to the main...

E- EXTENSIONS
ED- TRUNK CONTROL, ACCESS CONTROL
Related
Programming
l
l
P
l
l
Feature ReferenceTenant 
 Assigning Trunks to Tenants for Placing Calls
 Extensions, ES- Line Access Options.   to Outbound Lines 
If enabled, each user in the tenant group can press a line  to place a call (if
also allowed 
 ED programming).
E- Extensions, ES- Line Access Options, Allow Line Code Dial-Up 
 If
enabled, each user in the tenant group can dial a trunk access code (e.g., 801)
to access trunks (if also allowed by ED...

E- EXTENSIONS
ED- TRUNK CONTROL, ACCESS CONTROL
Instructions
Step  
Step  
Step 2 
Step 3 l
To enter data on the PRF:
For each extension. enter 
 on Table 6 for each trunk that should have access
enabled. Enter 
 for each trunk that should not have access.
To enter data at the programming terminal:
After programming ED- Ring Control for a trunk, you see: 
ACCESS
CONTROL 
 COPY?The  option   copy the  programming from another extension.
 To copy another extension’s keys. enter Y and the extension number....

E- EXTENSIONS
ED- TRUNK CONTROL, CALL-OUT 
Description
Note:
Related
Programming
Use this option to enable/disable   at each extension for each
trunk. If 
 in other programming, an  user can place calls on
trunks to which their extension has access.
Keep the following features in mind when programming Call-Out Control:
 Central Office Calls. PlacingUser can place calls only on trunks with  enabled.
 Prime Line SelectionFor  calls. the extension must have call-out enabled for the trunk appearing
on the...

E- EXTENSIONS
ED- TRUNK CONTROL, CALL-OUT CONTROL
l
l
l
l
l
l
l
l
CP- Direct Trunk Access and Trunk Camp O N    
Direct Trunk Access in Class of Service
E- Extensions, 
 Class of Service  Assign Class of Service to extensions.
E- Extensions. ED- Trunk Control, Access Control 
 Assign access for
each trunk that the user should be able seize using Direct Trunk Access.
Prime Line Selection
E- Extensions, ES- Line Access Options, Key Access to Outbound Lines 
The extension must have outbound line key access...

E- EXTENSIONS
ED-  CONTROL, CALL-OUT CONTROL
Feature Reference
Instructions
Step 1 
Step 1 
Step  l
Step 3 l
Central Office Calls. Placing
Direct Trunk Access
Prime Line Selection
Private Line
Tenant Service
To enter data on the PRF:
For each extension. 
enter Y on Table 6 for each trunk that should have call-
out enabled. Enter N for each trunk that should not have call-out.
To enter data at the programming terminal:
After programming ED- Access Control for a trunk, 
you see: CALL-OUT
CONTROL 
 
The...

E- EXTENSIONS
EE- RING GROUP
Description
For each member of a Ring Group, use this option to assign a Ring Group
number 
 For each member of an ONYX IV Alternate Attendant
(Attendant Console) group. enter the Alternate Attendant Group number. The
choices are:
Al Alternate Attendant Group for Attendant Console 1
A2 Alternate Attendant Group for Attendant Console 2
A3 Alternate Attendant Group for Attendant Console 3
A4 Alternate Attendant Group for Attendant Console 4
Do not assign more than 30 extensions...

E- EXTENSIONS
EF- 
 THROUGH TELEPHONE SPEAKER
Description
Related
Programming
l
l
l
Feature Reference
Use this option to  Paging announcements through the telephone
speaker. When programming Tenant Service. enable this option only if tenant
members can make pages.
This option only applies to 
 and ESL sets.
Default Value
Paging through the speaker enabled (Y).
Paging. Internal and 
 Call
CP- Inhibit Access  to Page Zone  3 
  Allow/inhibit Paging to zone 
for extensions with this COS.
CP- Inhibit Access...

E- EXTENSIONS
   TELEPHONE 
Instructions
Step 1 
Step 1 
Step 2 l
Step 3 l
To enter data on the PRF:
For this option on   enter  for each extension that should have -Paging
through the speaker.Enter 
 if  should not have Paging through the
speaker.
To enter data at the programming terminal:
Type 
EF. You see: EXT 300 .
Press RETURN 
to program extension 300.
OR
Enter another extension number and press RETURN. In either case, you see:
PAGING THROUGH SPKR
Enter data for this option from Table 3.You advance...