TiE Onyx 2, 3, 4, 5 Service And Programming Manual

E- EXTENSIONS
EF- INCOMING VOICE CALL THROUGH TELEPHONE SPEAKER
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 l
Step 2 
Issue 1-O
Use this option to alloy/deny incoming voice-announced Intercom  to a
 or ESL set. If denied, Incoming calls always ring the extension.
Conditiorzs
a. This option only applies to  and ESL sets.
b. In the large systems, dialing 
 and  from a  can change this entry.
For example, if this entry is N, dialing 
 from a  changes this entry
to Y. In VS,...

E- EXTENSIONS
EF- HEADSET MODE
Description
Related
Programming
Use this option to enable/disable the headset mode for  and  sets.
Keep the following in mind when programming this option:
 Enable Headset mode for each extension that has a headset. For 
attendant  this makes the HF key the Release key.
Disable headset mode for all extensions that should have Group Listen
l Disable headset mode for all extensions that should have Handsfree
 Enabling headset mode causes all calls to ring the extension
Use of...

E- EXTENSIONS
 INCOMING VOICE-OVER OFF-HOOK SIGNALS
Description
Use this option to enable/disable incoming Voice Over signaling for each
 This option interacts with ES- Off Hook Ringing. The chart below
shows this interaction at the destination extension.
Caller
Dest.E8  EF Result after dialing 1
 Handset Handset N   NVoice Over to destination
 HandsetHandsfree N NNo Off-Hook Signaling
 Handsfree Handset N   NNo Off-Hook Signaling
 HandsfreeHandsfree N NNo Off-Hook Signaling
 Handset Handset N   YNo...

E- EXTENSIONS
EF- INCOMING 
 OFF-HOOK SIGNALS
Instructions
Step 1 l
Step 1 
Step 2 l
To enter data on the PRF:
For this option on Table 3. enter N to enable Voice-Over Off-Hook Signaling.
Enter Y to disable Voice-Over Off-Hook Signaling.
To enter data at the programming terminal:
After programming EF- Headset Mode. 
you see: INHIBIT VOICE OVER
Enter data for this option from Table 3 and press RETURN.You advance to EF-  Through Telephone Speaker programming for the next
 extension.
Z-134  Issue 1-O 

E- EXTENSIONS
EG- NUMBER OF PROGRAMMABLE KEYS
Description
Related
Programming
Feature Reference
Instructions
Step  l
Step 1 
Step  
Step 3 
 this option to designate the number of programmable  on a  or
Data Set. 
   programmable keys: Data Sets and Attendant
Telephone 
    programmable keys. When programming 
button   enter  for this option (keys  are not used). Refer
to the Data Products Manual when programming Data Sets.
This option only applies to  and Data Sets.
On 
 up. the system automatically...

E- EXTENSIONS
EH- SUPPRESS DSS LAMPS
Description
Related
Programming
Feature Reference
Instructions
Step 1 l
Step 1 l
Step 2 l
Step 3 
Use this option to  DSS capability at each  If 
 user can program and use DSS keys. If denied. user has no DSS
functions.
Conditions
This option  applies to 
Default Value
Direct Station Selection allowed 
None
Direct Station Selection, Extension
To enter data on the PRF:
Enter Y to disable Direct Station Selection for each  on Table 3. Enter
N to enable Direct Station...

E- EXTENSIONS
 DO NOT DISTURB (DND)
Description
Related
Programming
Feature Reference
Instructions
Step 1 l
Step 1 l
Step 2 l
Step 3 
Use this option to  Do Not Disturb (DND) at each  For
attendants. you must allow DND at each attendant that should be able to
activate Night 
Conditions
This option applies  to 
Defartit 
DND allowed (Y).
Night Answer
E- Trunks, 
 Direct Trunk Termination  Assign an operator to each
trunk. For each trunk, Night Answer activates when that trunk’s operator goes
into the...

E- EXTENSIONS
EK- VOICE MAIL 
 PORT
Description
Related
Programming
l
l
l
l
l
l
l
l
l
Feature Reference
Instructions
Step 1 l
Step 1 l
Step 2 l
Step 3 l
Use this option to assign an OPX or AS1 extension as a Voice Mail  port.
When connecting a Voice Messaging System, each 
 port must be a
vx port.
Conditions
This option only applies to OPX or AS1 extensions.
Default Value
 port is not a Voice Mail port.
Voice Mail Compatibility
E- Extensions, 
 Circuit Type  Each OPX and AS1 P/N 89748 Voice
Messaging...

E- EXTENSIONS
EL- PRIME LINE KEY
Description
Related
Programming
l
Feature Reference
Instructions
Step  
Step 1 
Step  
Step 3 
Use this option to designate a  Prime Line Selection  and
option. The Prime Line key can be any line key (l-23). The 
 Line
options are:
R Ringing Prime Line
I Idle Prime Line
Conditions
This option only applies to 
Default Value
No Prime Line keys defined (no entry).
Prime Line 
Selection
E- Extensions, ES- Line Access Options, Key Access to Outbound Lines 
The extension must...

E- EXTENSIONS
EM- CONFIGURE DATA MODULE
Description
Use this option to set various parameters for Data Modules. Refer  
Products Manual for the specifics. The EM options are:
Baud Rates 
 Sets the baud rate for the Data Module serial port
Parity Options
 Sets the parity options for the Data Module serial port
Interactive 
  Enable Interactive Mode dialing or Non-Interactive mode
dialing for the device connected to the Data Module
Interactive Echo  . Enable Interactive Mode Echo for the device connected...