TiE Onyx 2, 3, 4, 5 Service And Programming Manual

E- EXTENSIONS
ES- LINE ACCESS OPTIONS, KEY ACCESS TO OUTBOUND 
Description
Related
Programming
l
l
Use this option to allow/deny a  user programmable line key access to
outside trunks. If enabled, a 
 user can press a line key to place a call (if
also allowed by the Related Programming below). If disabled, user cannot
use line keys for placing outside calls. This option applies to all line keys on
the 
 Additionally, it does not affect dial access to trunks and trunk
groups.
This option also lets:
A user...

.
E- EXTENSIONS
 LINE ACCESS OPTIONS, KEY ACCESS TO OUTBOUND LINES.
Related
Programming
(Cont’d)
l
l
l
l
l
l
l
Feature Reference
Step 1 
Step 1 
Step 2 l
Private Line
E- Extensions, ED- Trunk 
 Ring Control  Enable/disable 
for the Private Line. Assign ringing only for those extensions that have the
Private Line.
E- Extensions, ED- Trunk Control, Access Control 
 Assign access for
each Private Line. Assign access only for those extensions that have the
Private Line.
E- Extensions, ED- Trunk Control,...

 EXTENSIONS
 LINE ACCESS OPTIONS, ALLOW LINE CODE DIAL-UP
Description
Use this option to allow/deny an extension user from dialing a trunk‘ code
(e.g., 801) for an outside call. This option, affects all trunk codes. It does not
affect and extension user’s capability to:
 Dial a trunk extension number (e.g. 500)
 Dial a trunk group code (e.g., 90)
 Press a line key for an outgoing call
This option also applies to DISA trunks and incoming tie trunks.
Conditions
This option does not apply to DSS Consoles...

E- EXTENSIONS
 LINE ACCESS OPTIONS,  LINE CODE DIAL-UP
Related
Programming
l
l
l
Feature Reference
Instructions
Step  l
Step  l
Step  l
Tenant Service, Assigning Trunks to Tenants for Placing Calls
E- Extensions, ES- Line Access Options, Key Access to Outbound Lines 
If enabled, each user in the tenant group can press a line key to place a call (if
also allowed by ED programming).
E- Extensions, 
 Line Access Options, Access  Groups 90-95 (not on
key systems) 
 Restrict each extension in the tenant group...

E- EXTENSIONS (HYBRID ONLY)
ES- LINE ACCESS OPTIONS, ACCESS TO GROUPS 90-95
Description
Related
Programming
l
Use this option to allow/deny an extension dial access  the first six. trunk
  If enabled. an extension user can dial a trunk group code (90-
95) to place an outside call on one of the first six groups. If disabled, the user
cannot dial the trunk group code for groups 90-95. This option does not
affect:
 Dial access to groups 
 Dial access using trunk codes (e.g., 801)
 Dial access using trunk...

E- EXTENSIONS (HYBRID ONLY)
ES- LINE ACCESS OPTIONS, ACCESS TO GROUPS 90-95
Related
Programming
(Cont’d)
l
l
l
l
Feature Reference
Instructions
Step 1 
Step 1 l
Step 2 
Tenant Service. Assigning Trunks to Tenants for Placing Calls
E- Extensions, ES- Line Access Options, 
 Access to Outbound Lines 
If enabled. each user in the tenant group can press a line key to place a call (if
also allowed by ED programming).
E- Extensions, ES- Line Access Options, Allow Line Code Dial-Up 
 If
enabled, each user in the...

E- EXTENSIONS
 ATTENDANT (OPERATOR) ASSIGNMENT
Description
Related
Programming
l
Feature Reference
Instructions
Step  lEnter the operator assignment for each extension on Table 3.
Step 1 l
Step  l
Step 3 
Use this option to assign an attendant to an extension. This assignment is:
 The extension reached when the Intercom user dials 0 (refer to the
Intercom feature)
 The attendant that can activate night mode Toll Restriction for the
extension (if applicable)’
 The DSS Console owner (for DSS Consoles...

E- EXTENSIONS
 RING DOWN (ONYX IV),
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 
Step  
Use this option to enable (Y) or disable (N) Automatic  
 and ESL estensions. You should only do this if you have entered
an Automatic 
 destination in  Attendant (Operator) Assignment.
This option only applies to ONYX IV, and only to 
 and ESL
extensions.
Conditions
None
 Value
Automatic  disabled (N).
Automatic 
 (ONYX IV)
E- Extensions, 
 Attendant (Operator) Assignment  Enter the...

E- EXTENSIONS
 RING DOWN (ONYX IV)
 For   
Issue 1-O .SOFTWARE CONFIGURATION 

E- EXTENSIONS
EA- UCD GROUP MASTER EXTENSION NUMBER
Description
Use this option to assign an ACD or UCD master extension number.-
When programming an ACD group, assign the master extension number to:
 Each member agent
 The supervisor extension
l The ACD group master extension
When programming a UCD group (for Extension Hunting or Voice Mail
applications), assign the master extension number to:
 Each group member
 The master extension number
This option appears for DISA and tie trunks. For DISA and...